I'm having problems with new ipad 4G (3G in Portugal/Europe), when traveling I lose internet connection!

The device have network (shows it) but can not connect to the internet. Need to restart (off/on) to get access to the internet
Anyone know how to solve this problem

Thanks Jim,
I tried that already and as soon as I hid the ssid of my wifi the issue started happening again.  It used to connect but now won't do anything.
Neil

Similar Messages

  • Having problems with new ipad and charging?? Help me please

    I have the new ipad with retina display and it had that new smaller charger as you probably already know, well I've only had this ipad for about three months and I've already gone through two chargers for the same problem which is When I plug it in it does not charge unless I unplug it and plug it in about 40 times and then it starts to charge! Do you think it may have something to do with the ipad itself or am I just getting faulty chargers? It's not that cheap to keep re-buying these chargers ):

    Drusillameow wrote:
    ... am I just getting faulty chargers? It's not that cheap to keep re-buying these chargers ):
    Since your iPad is quite new, why are you "re-buying" chargers?  Are you not using the charger that came in the box -- the original Apple charger?  If you were doing that, and did not mishandle the charger (e.g., tug on the cord to pull the charger out of the wall socket), Apple would take care of the charger under its warranty.
    So I suspect you're either mishandling the charger (not likely), or using some third party charger (more likely).
    If it's the original Apple charger, and you're not mishandling it, contact Apple for assistance.

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • HT4539 I'm having problems with my iPad I downloaded I downloaded pro for two dollars and now when I try to download other apps in the app store it wAnts to kno my personal card info on free items and won't let me download items I already erase the I down

    I'm having problems with my iPad I downloaded I downloaded pro for two dollars and now when I try to download other apps in the app store it wAnts to kno my personal card info on free items and won't let me download items I already erase the I downloadeder pro but I don't kno way to do?

    Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • I'm having problems with my iPad

    I'm having problems with my iPad, it crashes, sometimes it doesn't work, freezes, iBooks won't open and I am TIRED!
    What would I do? I already reset it, and it looks like is worse!

    Restore it from iTunes....it will reinstall the whole software leaving out errors. But back up while restore...

  • I m having problems with my iPad 2 gestures.  The  screen enlarges and  will not respond to my attempts to restore it.

    I m having problems with my iPad 2 gestures.  The  screen enlarges and  will not respond to my attempts to restore it.   Is anyone else having this problem?  What is causing it and what  helps to restore normalcy?

    Try double-tapping the screen with 3 fingers and see if that zooms it back out - and if it does set Settings > General > Accessibility > Zoom 'off'. If it doesn't zoom you back then try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.

  • I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

    Doh! Rectified flash!
    But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

  • Hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50%  can u plz tell soutions for that plz

    hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50%  can u plz tell soutions for that plz

    This is most often due to faulty battery. Apple Genius can perform a quick several minute battery diagnostic test. Make Genius Reservation.

  • I'm having problems with my email account. I receive emails when I'm in a wifi zone.  But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network.  Only when I power off the phone and turn it back on, do I re

    I'm having problems with my email account. I receive emails when I'm in a wifi zone.  But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network.  Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)

    In your email settings on the phone check to make sure it is set to receive emails on cellular network.  It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on. 

  • Overdrive transfer problems with new ipad and old ipod

    installed overdrive for ipad on pc (win 7) and ipad2 app.  downloaded book from library site and it allows 3 transfers to devices.
    hit "transfer" and get error message that overdrive is not able to connect to my device(s) yet itunes shows my device and syncs my other items.
    tried the manually manage idea in the help threads. i use firefox. i have installed all of the many itunes/ipad/ipod updates,  tried reinstalls, reboots and new attitude...but not getting anywhere.
    help needed -thanks

    Quote
    Originally posted by Wonkanoby
    1 the board will not accept nor load a drive with old chipsets drivers on it
     do a clean install or over install
    2 you have to set fsb to 166 with the xp 2500  in the bios
    3 if your using an old psu i dout its going to be good enough
    I am having a simular problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive and clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
         Thanks Bruce

  • PowerMac G4 having problems with new RAM modules!

    dear all,
    I’ve recently got 2 512 MB Ram module from a British eBay dealer, to be used on 2 different but very similar PowerMac G4 AGP Graphichs 400 MHz machines.
    I installed the first module in my father’s Mac, and it works fine, no problems of any sort. Then, a few days later, I installed the other module in my PowerMac, and immediately it started behaving very erratically: some programs didn’t open at all and others crashed with no warning, I tried to run Rember but it soon get stuck. I assumed the Ram module was faulty, emailed the dealer (who’s been very helpful) and then sent it back to get a replacement. The new module arrived yesterday, I installed it... and it was even worse: as some programs didn’t open as soon as the new module was installed, I rebooted the PowerMac but it hasn’t been able even to load the OS anymore, it just stopped at the blue screen forever, once came out a black screen and a Darwin login, but nothing else. As soon as I removed the Ram module the PowerMac started to work perfectly again.I'd assume again there's something wrong in the Ram module, but isn't it too much unlucky to get 2 faulty modules one after the other, or maybe the problem could somewhere else, in my PowerMac?!?
    Unfortunately I can't test the new module in my father's machine, as we live 700 kms apart.
    My hardware details are:
    Power Mac G4
    Model: PowerMac3,3
    CPU: PowerPC G4 (2.9)
    1 CPU
    CPU Speed: 400 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 896 MB
    Bus speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    thanks!

    ok, I've now tried every possible combination... but with no success
    First, taking out one of the "old" 128 MB I realized it was one of the High density DIMMs (chips on one side only) Japamac was mentioning, in total 2 of the 128 modules were like this. However, taking out one or both of them, or even having only the "new" 512 MB module in, hasn't changed much, sometimes the OS booted, sometimes not but there were always some programs not opening/crashing and Rember got stuck with an error message. With just the "new" module the booting stopped at the blue screen (only blue, no apple splash screen in the centre).
    With the new module plus one of the old 128 MB modules (the one with chips on both sides) Rember got stuck very soon, and the error message was:
    Memtest version 4.2 (32-bit)
    Copyright (C) 2004 Charles Cazabon
    Copyright (C) 2004, 2005, 2006 Tony Scaminaci (Macintosh ports)
    Licensed under the GNU General Public License version 2 only
    Mac OS X 10.4.11 (8S165) running in multiuser mode
    Memory Page Size: 4096
    System has 1 PPC processor(s) with Altivec
    Requested memory: 434MB (455589888 bytes)
    Available memory: 434MB (455589888 bytes)
    Allocated memory: 434MB (455589888 bytes) at local address 0x02008000
    Attempting memory lock... locked successfully
    Partitioning memory into 2 comparison buffers...
    Buffer A: 217MB (227794944 bytes) starts at local address 0x02008000
    Buffer B: 217MB (227794944 bytes) starts at local address 0x0f946000
    Running 1 test sequence... (CTRL-C to quit)
    Test sequence 1 of 1:
    Running tests on full 434MB region...
    Stuck Address : setting 1 of 16testing 1 of 16setting 2 of 16testing 2 of 16
    I guess all this confirm the "new" module is faulty, I'll soon email the dealer
    Thanks to everybody for the help!

  • Having issues with new iPad mini retina 128 dropping wifi

    New ipad mini have issues with dropping signal while I am in the middle of connection.  I can be reading a book or email and it will just drop the connection.  When I try to hook back up it says it cannot join.  My iphone 5c is right next to me and is connecting fine.  It is frustrating when  I am in the middle of taking notes in an area and it drops the signal and I lose everything.  I can be 5 feet away and it will not hook up.  Also, I have reset the network settings and started all over.  It helped for a day or so and it started all over again.  Also, I have reset and turned off and on my router to assure the signal connections.  I am now in the process of taking it back for a replacement.  Apple says it is a hardware issue. 

    I'm experiencing the same problem.
    But my old iPad mini is connecting fine.
    I think it is a firmware or software problem?
    I hope Apple will fix this issue on an update sooner!

  • Any problems with new iPad Air 2?

    I have an iPad 2 (2nd Generation) 512GB RAM w/32GB storage.  Running out of storage room.
    Thinking of getting the new iPad Air 2 128GB wifi
    Before I buy one, any problems or issues with it? I hope the issues are only with iOS 8  and not the hardware.
    iOS issues can be fixed with a new update.

    Currently as of this post there is a random popping sound every so often, wifi shuts off sometimes and turns back on. The speaker vibrating isn't a defect but it's there because of how thin.

  • 3g problems with new ipad in the netherlands

    I have problems with the 3g connection on my new ipad in the Netharlands t-mobile as provider Who else ?

    Do you want help or are you conducting a survey?
    If you want help you have to provide more details like what happens? What provider? What plan do you have? did it ever work? etc?
    If you are conducting a survey you are breaking the terms of use of this forum. See the TOU.

Maybe you are looking for

  • XML parser error in TestStand3​.0

    When I call Labview VI's in TestStand I Got the error messange like "Failed create the XML parser, Unable to Parse the VI prototype" error. What can I do to avoid this error?

  • Fill in PDF forms

    I have some forms that can be filled in and saved using adobe PDF reader.  When I open them on my playbook, I can't type into any of the feilds.  Is there anyway around this? Thanks

  • (XML) HTTP POST to Stored Procedure (mod_plsql)

    Hi, first of all, sorry if this is the wrong forum, I've also tried SQL/PLSQL with no answer at all, so I atleast wanted to give it a go here, as you guys probably have some mod_plsql experience. Let's put up an example scenario: Vendor X wants a URL

  • Standard report for history per purchasing document

    hello! Is there any standard report for history per purchasing document that displays also the delivery costs? Thank you!

  • Install SOA suite on top on an existing working MDM install - Help needed

    Hi, I have a working install with all components on a Windows 2008 server. Jdeveloper 11gR1 Oracle DB 11gR2 MDM 2.01 OUAF 4.1 Weblogic 10.3 And now I need to install SOA suite 11g. When I did, Jdeveloper stopped working. I was able to revert back to