I'm having problems with Outlook for the Mac, anyone else?, I'm having problems with Outlook for the Mac, anyone else?
I have recently purchased a Mac. I'm very dissapointed at the way Outlook 2011(the newest version, what?!?)interfaces with the Mac. I used the contacts feature all the time when I had a microsoft system. Now, I can't do that with Outlook for the Mac. Does anyone have any alternative Apps that they've used for Business contacts? Thanks much.
thank you both for your responses. I'm having trouble mostly with a way to handle my business contacts. I'm self employed and when I had Outlook for Microst(before I switched to Apple)I was so pleased with this softward. Esp the way it would keep track of any correspondense between me and my customer. I could also track billing thru Outlook contacts.
Now, I get my mail thru outllook and use ical and @contacts. I see that I can have a separate group of contacts thru @contacts, but, it's not the same or nearly as good as Outlook contacts for Microsoft.
So, right now I'm really disapointed with my Mac purchase and hoping to find an app that will help. I will investigate Thunderbird.
thanks again.
Similar Messages
-
I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.
Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout
-
Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
I have been playing Candy Crush Saga for a long time, all of a sudden it is blanking out when I ask friends for help to the next level. What can I do to remedy this?
Hello Pepper 46,
It sounds like an app you installed is not functioning correctly. I recommend starting with these steps from the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
There is additional troubleshooting in the article if this doesn't resolve it.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Please can anyone help solve this problem I need my contacts on a daily basis.
Thank you Ross Hugotry replacing the sim card after that it needs to be replaced and since you had some one else open up the phone you would lose the out of warranty replacement price and have to buy a new one at the full retail value
-
It keeps asking me to re- enter the password. Is there something that I am doing wrong, the account has been verified but as soon as I exit out of settings it will ask me to re-enter my password.
I have done this and keeps saying the same thing. I have even tried setting my account through Microsoft exchange but no luck
-
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?
WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them. -
I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program?
I'd start with the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before
Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens? -
I have been having problems since updating to the latest version of Numbers.
When I try to open files I am getting an error.
"The document “'13 Tax Prep .numbers” is invalid.
The index.xml file is missing."
Anyone else getting this message? Anyone know how to fix the issue?Jeff Shenk wrote:
Numbers 3.1 can recognize both the new files without the index.xml file and the old ones with it, which it imports to the new format.
Agreed on that part. But take it a step further. If Numbers 3.1 is asked to open an old document that is still in the old Numbers 2 format that relies on an index.xml file but Numbers 3.1 can't find the index.xml file (perhaps the document is corrupted) then how can Numbers 3.1 open the document and interpret it in order to convert it to the new format? My guess is that this a possible trigger for the 'index.xml missing' error message.
Interesting link here on the new document format.
SG -
I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273cSorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c -
Hello to you in the company Apple. I am having a problem in the Apple Store ID does not allow me to work on the Apple Store I hope that you will help. You have sent you yesterday and today I want to call the phone number for Mei you and explain to you why with many thanks
Sorry, but you can't reach Apple here. This is a user to user forum and Apple does not follow these discussions.
Try this link to contact Apple directly:
Apple - Support - iPhone - Contact Support
Did you already have a look at this page?
App Store Frequently Asked Questions (FAQ) -
I'm having trouble with my new iPhone.it seems it likes to turn it self off for no reason at all.i would like to know is this a hardware or software problem or just a iPhone problem i don't know.
basic troubleshooting steps from the User Guide are restart, reset, restore from backup, restore as new.
Have ANY of these been tried? -
I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create files in the temporary file location /var/folders/jv/2bct456j0yg4ys681fxk9zq00000gn/T " don't know what has happended in 24 hrs except I did check my permissions on my main directory to ensure that I had extended permissions to all the folders contained within my main drive on my IMac running OSX 10.10
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
I have an imac that I've had for a couple years. The fans have always been loud when running at the slower speeds. When the computer heats up enough for the fans to run at a higher speed the fans quiet down. I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved. That seemed to keep the fans quiet enough. I've never had a problem with overheating. Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan. I got it back and it's now as loud or louder than ever!! And, now SMC fan control won't "stick." The fans will speed up, but then gradually go back to the lower "loud" levels. I'm at a loss as to what to do next.
Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.
Maybe you are looking for
-
Call forward to unity connection call handler
have the following setup: cucm 8.6 cuc 8.6 a cti route point (DN 1000 )with forward all to unity connection call handler. phone users who choose to have some quiet time can forward all their calls to the cti rp. 1. i need to allow only specfic DNs t
-
I can't send email on Ipad2. I have a iPad3 and have set up the iPad2 with the exact same settings as the 3 but the 2 will not send email while the 3 will. It looks like it's going to send with the progress bar but then I get that blue bubble saying
-
Vendor create process using workflow
hello, I have been assigned a project to desgin a process to automatically create a vendor. below is what I think has to be done. can this be reviewed to see if this is the correct approch and if not, suggest a better approach. 1) the vendor will sig
-
Switch Users Option on Lock Screen
I am at a community college setting up new macs for a lab. When someone doesn't log out and let the computer lock up, there is no option to switch users. The computer has to be turned off for someone else to log in. The older macs we replaced show
-
How to perform Auto Save using Enhancement Id.
Hi, I am working on an enhancement object in which i have to perform Auto Save functionality,when particular enhancement ID is active. To check activity status of the enhancement ID, function module 'Z_CC_CHECK_ENH_ACTIVE' is used. When the enhancem