I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Similar Messages

I'm having problems with my email name. It keeps coming up as Holidays in United States. How can I fix this?

Today all my emails started coming and going out as Holidays in United States. I can't seem to be able to fix this. Anybody experiencing this? How do we fix it?

Hi Guys ,
I had the same issue , as some one suggested please check in your contact under your name .
If your name in contact list does not have email address it will come as 'Holidays in United states' (Which is so frustrating as I am working , LOL), you need to add your email address in your contact name and then it will go.
I have done that and it worked for me , best of luck

I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?

I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?

The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

Lagging pixels on video while editing and after render-export. -How do I fix this? the original media is Crystal clear.

Hello guys,
I am trying to edit some gameplay footage I captured using "AverMedia Game Capture HD", but whenever I import the media (at 1080i),
There are pixels that hang on the video player, mostly when the camera is turning left to right,
and on occasion, some random color blurs that bloom out of nowhere.
I attached a image so you can see what it looks like:
Here is what the video looks like after it is rendered and exported.
Along with the visual pixels, it also displays horizontal lines. (possibly due to my export settings, I was in a hurry just to test it)
Both the capture device and final cut pro x are upgraded to the latest firmware/updates.
I am using HD AC Component cables (blue green red) both for in and out connections between ps3 - cap device - tv.
The capture device automatically records files to mpeg-4.
The resolution of the tv, and recorded footage is in 1080i (1920 × 1080) and the quality looks great when I play it through quick time or any other media players:
Any tips or info? I have been using Final Cut pro x since it was released. I am not a professional but I have used it for some very important jobs thorugout the year, but I am really stumped with this.
Overview:
-Media info
File Type: mpeg-4
Codec: H.264, AAC
Dimensions: 1080i (1920 × 1080)
Thankyou for the help!

Alright, lets get the good news out first:
Converting the file definitely fixed the pixel issues.
However, there where frequent "blips" of some frames that disturbed the video.
Also, the converter created a 5GB file that was originally around 300MB!!
It put a serious load on importing, rendering and transcode analysis, however the video played back smoothly, it would be perfect despite the large file size and frequent frame glitches.
This is all due to my lack of knowledge in video property conversion.
At this point, I feel that I am asking for too much, but I am really stumped...
I can try so many possibilities, but this would save me allot of time if I could get the help:
What converter settings should choose to have the optimal video file that,
plays back smoothly,
plays In HD,
is compatible with fcp,
and can still stay moderately low on file size?
Here is the current info on the RAW video file:
Here are the previous settings I used to convert:
(slight improvemnt, but extremely high file size, and still has some frame glitches)
What should I have (not?) done with these options?
(I admit I chose these settings and had no Idea what the heck I was doing)
Again, thank you for your help, I really appreciate it.
EDIT:
For reference, This is the new glitch issue I see:
Here is the normal frame,
Here is the next frame when a glitch apears.
It seems to be replying a previous frame in the video.
Also, the horozontal lines do not show during live playback, only when the play head is paused, or when scrubbing.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done.

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !
The ilustrator when opening files from a lack of memory of which I own already find it hard 11Gbram , Photoshop crashes inesperdamente and the Media Encoder is not converting the video in nnehuma the options requested .
Would like guidance , never had such problems with Adobe software . Today got a MacPro 2x2,2.66 Ghz Dual Core Intel Xeon 11Gbram 240GB SSD .

Hi Mw,
Will it be possible for you to join the connect session: https://my.adobeconnect.com/rbhunwal
I want to have a look into this.
Thanks & Regards,
Raghuveer

I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

I have been having problems with my iPod touch and my WRT...

I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PM

I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection.

I'm having problems with CS2 (mainly illustrator and photoshop

I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
Please Help!

CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
Third party software Illustrator Repair Kit also must be good solution
It has free demo version at:- http://www.illustrator.repair/
Hope this will be helpful.

I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

Is anyone else having problems with there phone freezing after the 8.0 update?

iis anyone else having problems with there phone freezing after the 8.0 update??

Hello Chefboyharley,
Thanks for the question. After reviewing your post, it sounds like the phone is unresponsive. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Not responding or does not turn on
Thanks for using Apple Support Communities.
Have a nice day,
Mario

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.

I cannot view pdf files on Safari, instead they download and open in viewer. How do I change this?

Does anyone have a solution for this???
"I cannot view pdf files on Safari, instead they download and open in viewer. How do I change this?"

Back up all data. Please read this whole message before doing anything, so you'll know what to expect.
Open Safari's preferences dialog and make notes of everything you would need to recreate the basic settings, such as your home page. That includes the settings of Safari extensions, if any are installed.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
~/Library/Preferences/com.apple.Safari.plist
Quit Safari. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste (command-V) into the box that opens and press return. A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open.
Launch Safari. Its settings will have reverted to what they were they first time you launched it. Your bookmarks, history, and AutoFill data will be preserved.
Test. If Safari now works as expected, recreate its settings and delete the file you moved to the Desktop. Otherwise, quit Safari again and put the file you moved back where it was, overwriting the newer one created in its place. Post your results.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

Similar Messages

Maybe you are looking for