I'm having syncing problems after I upgraded my iphone 4 to ios 5 !!

Yesterday I went to a cellular shop and asked to upgrade my iphone 4 to ios 5.
Now that my phone is upgraded, I plugged it into itunes at home.
I was trying to sync all the applications and the songs and the photos.... to my phone but each time the syncing starts, after a few seconds it stops immediately without syncing anything !
Any ideas ???

same problem here!!!!!!

Similar Messages

  • I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
    It might be something in your backup.

  • No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!!

    OMG!  No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!! Any Idea how to fix this?

    Go to settings do a reset after that tou will need to enter you Router wireless key Then wait for iPhone to come on. This worked for me on iPhone & ipad. Bsydd uk

  • My personal hotspot disappeared after I upgraded my iphone 4s to iOS 8, how do I fix this?

    After upgrading my iPhone 4s to iOS 8.0 the Personal Hotspot disappeared even after I upgraded again to iOS 8.0.2 its still not there. How do I fix this.

    Hello there, george.
    The following Knowledge Base article offers up some great steps for troubleshooting Personal Hotspot:
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/ts2756
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Having syncing problems after installing iPhone OS 2.0 for the iPod Touch

    Ok, after finally installing the software on my iPod Touch 2nd Gen, I tried to sync it, and it only syncs my pix and apps. It will not sync my music nor videos. It read " an unknown error has occured. (error 13019).
    Has anyone else expericned this problem. It's starting to make me regret buying the upgrad software, specially since the iPhone and iTouch is basiclly the same thing. Donnt get me wrong it has the other features but I cant do the things that I orgianlly bought the Touch for.

    Yes, I didnt unclick anything and and everything stayed the same since before the upgrade. I tried everything. And still nothing works!!!!

  • IDVD audio sync problems after Lion upgrade

    Hi all,
    I posted this in the Lion discussion, but thought I might have a go here as well. I'm having problems with iDVD and audio sync as follows...
    I often download files from my Beyonwiz PVR, convert them to mpeg and DV files using MPEG Streamclip (with Quicktime MPEG playback component), then burn a disc with iDVD. Since upgrading to Lion, I notice that the audio in these files, and the burnt DVD in particular, can be slightly out-of-sync with the video. Although the effect is slight, I find it very unacceptable - its like trying to watch something that been badly dubbed. I find it to be a very jarring effect to watch voices and intonation out of sync with the picture.
    I'm not sure where the problem lies - is it Quicktime, MPEG Streamclip, and/or iDVD ? I never had this problem at all with Snow Leopard.
    Fox

    I've discovered that the problem appears to be the conversion of the mpeg file to the DV file. The video/audio goes slightly out of sync using MPEG Streamclip under Mac OS Lion. I never had any problem with Snow Leopard. I'll have to try different conversion methods and see what happens...

  • PS CS6 having printer problems after Yosemite upgrade.

    I've seen a lot of people having problems with this, and zero answers from Adobe. I'm running Photoshop on a 2012 iMac. I don't know what exactly triggers the problem, but it occurs when I'm changing the print settings for a document. All of a sudden I get this message:
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    And nothing, nothing will enable me to print from Photoshop ever again, except re-installing the whole program. This is a pain, of course, and I lose all my settings.
    There seems to be an incompatibility between PS and older macs running Yosemite. I have not had the problem with my 2014 MacBook Pro--it prints fine from PS with the same printer. (A CanonMG5320, FWIW, but it seems to be happening to people across a range of printers.) I spent a lot of time in a fruitless text chat with someone at Adobe who disappeared after a bit and left me hanging.
    Whose responsibility is this? Adobe's or Apple's?
    I just wish someone would fix it.

    Probably either Apple's or Canon's. There have been a lot of issues with he new Yosemite. First off, are you running the latest version of Yosemite (10.10.3)? Have you tried Re-installing the printer's drivers?
    Benjamin

  • I have a problem, i can't change my lockscreen wallpaper after i upgrade my iphone 4s to ios 5.1.1... Is there anyone who can help me?

    I have a problem, i can't change my lockscreen wallpaper? Doesnt work...is there anyone who can help me regarding this problem? Thx

    To help, we need more detailed information.
    --What steps are you trying?
    --What does the device tell you (any pop-ups or messages)?
    --Are you able to change the Home screen wallpaper, or is that affected too?
    --Are you the phone's owner/administrator, or is this a device used for work (assigned/administered by IT staff, possible on an Exchange server)?
    --Have you jailbroken the device?

  • The Music app will not open after I upgraded my iPhone 4 to IOS 6.

    This is a random occurance that started today.  I upgraded the phone when IOS6 came out - and the Music app has been giving me troubles since then (crashing; taking a couple of tries to open; etc.).  However, I have never had this much trouble getting it to open.  I have restarted the phone a number of times.  I have hard-closed the music app.  All to no avail.  It opens for a second, with a blank screen, then closes.

    As I mentioned in my post, I did restart the phone a number of times, and this did not solve the problem.
    Restart ≠ Reset.  Try the Reset.
    Apart from a Reset and closing the app, without your computer, there's not much you can do.  I suspect there's a problem with your music database, which I think can only be solved with access to your computer.

  • After I upgraded my Iphone 4 to iOS 6 my email app won't open.

    Can anyone tell me how to fix my iphone 4 so that the email app will open?  It opens to a blank, white screen for about a minute then closes. 

    There is no supported method to downgrade iOS.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I can't get my bluetooth to work after upgrading my iphone 4 to ios 6

    After I upgraded my iphone 4 to IOS 6, i can't get any of my bluetooth connections to work.  Both my headset and my car are not recognized.  I validated that Bluetooth is on in the configuration, but it just keeps searching for devices and never recognizes them.  Is there a setting I'm missing?

    What does the manual say on the wireless speaker on how to connect to other devices?

  • Syncing is really slow after upgrading my iPhone 3Gs to iOS 4.3.3.

    After upgrading my iPhone 3Gs to iOS 4.3.3, syncing my iPhone takes 15 to 20 minutes.  Prior to this, it only took a minute or two.  It just sits on "Preparing to Sync" the whole time, an finally completes the sync after 15 or 20 minutes.  My office 2007 Outlook locks up in "Office Outlook is Syncronizing Folders" right after syncing.  I have to reboot the computer to get it out of this state.  What is the problem here?  Has anyone else had this problem?  If so, how was it resolved?  Thank you.

    This might also help http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf - Page 32

  • E-Mail problem after server upgrade

    I had my email on my phone for over a year. It worked perfect... until the office upgraded the server.
    After the upgrade I get the error message "Cannot get mail" "The connection to the server failed." I can access another co-workers email on my phone with the same settings, but not my own.
    I have tried deleting the exchange account and setting it up again, but that didn't work. I tried deleting it, rebooting the phone, and then setting it up again.
    What doesn't make sense to me is that I can access someone else's email, but not my own. It is very frustrating. The people that use Android phones are having no problems after the server upgrade.
    Any suggestions?

    EAT729 wrote:
    Any suggestions?
    Yes.  Contact your IT department.

  • IPad3 email sending problems after. Upgrading to IOS6

    I having this problem after I have upgraded my iPad 3 with IOS 5 to IOS 6. The problem is in sending email and not receiving it. Any idea what is the problem?  I have tried resetting, setting up the iPad as new one and everything I can thing of .i.e. even calling the support service but nothing is rectifying it.  No new ideas !
    I think this is an integration problem that apple has to stream line for its IOS 6.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

    i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

    Check that your computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    MacBook Air (Late 2008 or newer) model number 2,1 or higher
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Mac Pro (Early 2008 or newer) model number 3,1 or higher
    Xserve (Early 2009) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.  You can make a bootable DVD/USB stick to install using this free program.
    Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
    Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
    Mavericks is supposed to be released this fall, so you may want to wait.

Maybe you are looking for

  • Itunes 10 itunes problem when trying to sign in the account.

    for no reason, i tried to reinstall and also tried the ipconfig /flushdns method and nothing works for me. All itunes respond to me is the following message: "We could not complete your iTunes Store Request. The network connection timed out. Make sur

  • New hdd

    Recently, my hard drive crashed and so i got a new one. my whole music library was linked to all my music which is on an external hard drive. after installing my os (windows xp professional), all applicable updates, drivers for my Belkin firewire/usb

  • Xml web service and lov

    Hello, I've got a collection containing Web service result. I can create a report based on this without any problem, but when i try to create a LOV, there is an error: LOV query is invalid, a display and a return value are needed, the column names ne

  • Load Balancing in SICF Service

    Hi, I have set Up Load Balancing for a Logon Group in the SICF service. In transacion SMMS, the parameter ms_Service_port_xx is maintained for HTTP for each server in the landscape. Is this all I have to do for Load Balancing or there is any addition

  • Content movement from MOSS 2007 to SP 2013

    Hi, I have a site collection in MOSS, a site has a document library with OOB Approval workflow, and the library has documents too.  Now, I have requirement wherein I need to move the documents from Moss to SP 2013, and the document should persists th