I'm having trouble connecting my PS3 on my Wi-Fi.  It can not read my IP Adress?

I can not get my PS3 to connect with my Wi-Fi.  The PS3 can not read my IP adress on my Airport express. 
Please help
Thank you

By default, the LAN-side IP address of your AirPort Express would be: 10.0.1.1. This would also be referred to as the Default Gateway address. Is this the value that you are providing the PS3?

Similar Messages

  • I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In

    I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In. I Can Not Type Anything Into Yahoo Search Or Any Where I Need A Password. Anytime I Try To Type Anythink In It Locks Up Firefox The Same With Thunderbird Can't Write An Email Thunderbird Locks Up When I Start Typing. My Roboform Will No Longer Fill In The Forms. I Have Uninstalled All Three Programs Three Times. Can You Give Any Help.
    Thank You

    Hi,
    Sounds like you have two problems there. One for Firefox and one for Thunderbird.
    We can help you with the Firefox question but your other Thunderbird question will have to go into the Thunderbird queue. You can create a new Thunderbird question by going to [/questions/new/thunderbird]
    Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
    *'''Windows/Mac''': Go to Help > Restart with add-ons disabled
    *'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
    If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

  • HT2497 Using Time Machine for home wifi just fine. Switched to cable modem from DSL.  Now having trouble connecting laptops to wifi. ISP says it is not their fault. Mac books won't connect on their own.

    Changed from DSL to cable modem. Now Mac book pro won't connect to wifi - Time Machine?
    One Mac ok, other not. Help?

    Thanks. We have been using an existing Time Machine for wifi.  Cable modem replaced DSL router and was hooked up to Time Machine. What's odd is that 3 computers and iPad2 are connecting to home wifi just fine, using exact same network and password as before. My Mac book pro and an older iPad are not. IPhones are also connecting to home wifi just fine. I managed to get my Mac book pro hooked one time by copying ip address from a Mac that was working (entered manually) then turning that one off. That's not what I need.
    The error message is "no ip address".

  • Having trouble connecting my iphone 4 to computer..device is not geting detected

    I am nt able to connect my iphone to laptop.its nt geting detected

    Pick the appropriate one of these for advice:
    Windows - http://support.apple.com/kb/ts1538
    Mac - http://support.apple.com/kb/ts1591

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • I'm having trouble connecting my iphone to my itunes on my computer

    So for christmas I got an iPhone and currently, I'm having trouble connecting my iPhone to my iTunes on my computer. If I get on my computer and open my iTunes, I can use it perfectly fine but once I tried to connect my phone to it, it told me the software needed to be updated before it would work with my phone. I went to the website and tried downloading the updated version 10 times but every time it told me it couldn't connect with an apple device or something. So then I tried just going to my downloads and stuff and moving the actual song straight to my phone but it would always tell me my device has ended or has been disconnected. All I'm trying to do is move some songs onto my phone from my computer. They weren't purchased straight from iTunes so it's not showung up in my "purchased" on my phone. (I think I got them from amazon and some are cds that I my computer that I got years ago. Maybe thats why they don't show up in the purchased?) Anyway, how can I fix this? I have a windows computer if that can help at all. Thanks!!!

    Also, I just opened my iTunes on my computer then plugged my phone to the computer and a box popped up saying "This iPhone cannot be used because the Apple Mobile Device is not started"
    I have no idea what that means.
    I don't have that option on the side that says what device is connected so I can't sync or anything.

  • I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!

    I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  This just started happening today (2/19/14)!  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!  BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops.  Again, HELP!!!!

    You may not really be connected to your WiFi network.
    Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

    My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

    Same issue here too.  I will try reinstalling the firmware update.  This has happend to me twice.  The only way to correct the issue was to reboot.
    Thanks!

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • Having trouble connecting computer to TV with sound

    I have a 2010 macbook pro and a samsung LN40B550 LCD HDTV - having trouble connecting computer to TV with sound - I'm not sure which connectors I need and have purchased a few that aren't working (HDMI: DVI cable & Mini - DP to DVI adaptor).  Any help would be greatly appreciated. Thanks

    Sorry to tell you that DVI does not support sound.  You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
    Ciao.

  • Hi, My daughters just got an ipod touch today and I'm having trouble connecting it to my Wi-Fi network!??

    Hi,
    My daughters just got an ipod touch today and I'm having trouble connecting it to my Wi-Fi network.  It identifies my wireless connection but then says 'unable to join the network' with the word 'Dismiss' underneath.  Any ideas on what I can do? Thanks!!

    Hi
    Thanks for your reply.  I've tried resetting a few times. There is no 'tick' next to the name of my wireless connection so it won't connect at all.  I think I may have to do something with my router as there is an arrow button to press next to my wireless name, this takes me to a screen which asks for IP address, then has options for DHCP   BootP and Static, it asks for Client ID DNS etc - all gobbledegook to me!!   Perhaps my router is blocking the Ipod?
    Thanks anyway!

  • Im having trouble connecting ipod  to denon avr x1000

    im having trouble connecting ipod  to denon avr x1000

    Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
    Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last.

  • Having trouble connecting ipad to computer

    having trouble connecting ipad to commputer

    I assume that you mean iTunes is not recognizing the iPad.
    iOS: Device not recognized in iTunes for Windows - Support - Apple

  • I am having trouble connecting IPAD1 to wireless any suggestions?

    I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

Maybe you are looking for

  • How do I add multiple items to a hitTestObject?

    I have a horizontally scrolling flying game involving a character and diferent types of food moving across the screen from right to left which the character has to collect ("hit"). I have the hitTestObject working for 2 different food movieclips with

  • Why can't I edit one of my Numbers spreadsheets ?

    This is not a new spreadsheet and I have always been able to edit it.  I have not had any new or software updates. I can open other Numbers spread sheets but not this one. I have used Disk Utility to repair permissions after every update.  But the la

  • How do I get thumbprint images to appear in the Organizer of Photoshop Elements 13?

    After installing 13, I get hourglass symbols for all the pictures in the catalog, and when I click on them, I can see the picture image, but obviously can't search the catalog visually. Any ideas?

  • ITunes store error -37 (long filename?)

    I purchased 54 songs (Stravinsky, actually) and one of them would not and will not download, giving an error of "stopped, err = -37". According to the store support e-mail response, it may have something to do with long filenames. They cited this: ht

  • Access to container ActualArgs in TS.SData

    Hi, I want to get the parameter names of a sequence call step by using the TestStand API. The Container with this data is called ActualArgs, but how can i get the names (normaly arg0...argx) of all used parameters? Regards, Sunny