I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?
Similar Messages
-
I have an iphone 4s. I have a mac computer and a pc. Most of my itunes library is on my pc, but when I try to add music to my phone from my library on the pc, it won't let me do it. I CAN add music from my library that is on my mac, same account. My husband has the same problem with his iphone 4, but only uses pc.
My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks -
Will try again. Am having trouble with a firmware updat for sony 40ex500. Downloaded update to my thumb drive but when inserted in the usb slot on the tv, the sequence to update the tv does not complete. Various service reps have led me to you for resolution. Please advise? Bill Becker
I have a Macbook with Tiger, and OS x 10.4. I had to install a new hard drive.
Run Disk Utility /Applications/Utilities
First, go to your Apple menu then click Software Update...
If no updates are available, check the startup disk using Disk Utility.
Using Disk Utility to verify or repair disks -
I want to install a printer hp laser pro cp1525nw on my macbook air with mountain lion 10.8.2 . I download the drivers from the apple site and install them . I resart the macbook . I just can not add a new printer . the computer dos not start a research
Can you help me?hi . I had the simalar problems of my HP b209a-m printer not being seen on my wireless network> I could not add the printer and could not get the printer to join my network, I found this post at HP discussion and it worked!
Each printer has different options/settings but it seems like the general idea should work ok if you can reset printer back to factory settings and find Printer IP Adress.
This is for HP printers
1. On the printer navigate to the Wireless or Network menu.
2. Select Restore Defaults.
3. On your computer look for a wireless network named 'hpsetup' and connect to it.
4. Print a Wireless Network Test from the front of the printer to see its IP address. (on my b209a-m Printer the IP info was found by pressing the Wireless Icon)
5. Type the IP address into the address bar of a web browser to see the printer's internal settings.
6. Click on the Network tab and look for the Wireless Setup Wizard and run it.
7. The Passphrase is the password you use on your wireless connection.
8. Now change the network name on your computer back to your wireless network.
The printer will now be connected to your network. With your the computer backyour wireless network network, you can re-add the printer from System Preferences.
Hope this works--- it did for me.
Jim -
from the boot camp control panel, highlighted "Macintosh HD Mac OS X", click on Restart button or click OK or click Apply buttons gave me "An error occurred while trying to change the startup disk. You may not have privileges to change the startup disk. Make sure you have administrative privileges and try again."
Im logged in to Windows 7 as admin thou but still giving me the above message.
i rebooted & the option key does not give me option to boot to Mac instead gives me a screen with lock then below is a blank field then a right arrow on the right side, i normally hit the power button from this screen
please help
thxsorry for digging up an old thread, but what was the problem?
-
Hi, I purchased Acrobat Standard XI and received a mail thatthe order has been processed. Installation was fine, but I didn't receive the serial number.
If you purchased a subscription, there is no serial number. Sign in with your Adobe ID to license the software.
-
.Apple sent me an email saying it was available but when I try to donwload it I get a message saying I already did. I checked the store menu and it indicated that there is nothing available to download. I don't have the songs or the album showing in Itunes anywhere. Not sure what to do.
Hi OverratedBacon,
Thanks for using Apple Support Communities. I would first try downloading the songs from your past purchases by following the appropriate steps here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you're still unable to receive your preorder, you may want to report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari -
I updated to the new iTunes last week. Today I plugged in my 4th generation Shuffle to add some new songs. The shuffle appears in Devices, but when I try to add songs, I'm not getting the progress bar at the top of the screen, so I'm assuming the song isn't being added. I tried ejecting the Shuffle and plugging it in again, and I got a message that my iPod needed to be restored before it could be used with iTunes -- even though the screen also said the Shuffle is up to date on the software. I finally gave in and restored it, but I continue to get the same message. When I eject the iPod and try to play it now, I'm getting nothing, and when it is connected to the usb port, the orange light is continually flashing. I've been trying to figure this out for about 3 hours now, so if anyone could help me, I'd be eternally grateful!
The 1st and 2nd gen shuffles do not have an automatic syncing mode, like later shuffles and the "big" iPods. It is maintained manually (or by using the Autofill feature).
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The shuffle appears in the sidebar, under DEVICES, when connected.
To add songs to the shuffle... Show a list of songs in the iTunes window. For example, you can select Music under LIBRARY (in the sidebar) to show your complete iTunes music library list. Select a song and drag it to the shuffle in the sidebar. You can do this with more than one song selected. Alternately, select the song(s), right-click the selection, and choose the command to Add to Playlist -> [name of iPod].
To remove songs from the shuffle... Select the shuffle in the sidebar. To the right, it's Settings screen is shown. Toward the top, where it says Settings, click on On This iPod (to the right). The list of songs on the shuffle is shown below. Select the song you want to remove and press Delete on the keyboard. You can do this with more than one song selected.
NOTE: At the bottom of the shuffle's list of songs, there are controls for the Autofill feature. You can also use Autofill to fill your shuffle from your music library or from a specific playlist. -
I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. How do I add purchased playlist to ipod without erasing existing ipod playlists?
cujoftw wrote:
wow ... I get a headache just trying to read what you just said. I went and read how to migrate my library and found that you can only migrate purchased media.
No, you can easily migrate your entire library from one working compter to another.
If you fail to backup or migrate your library and find yourself with nothing but a new empty computer and a device full of content iTunes is designed to only recover the iTunes purchased content, however third party tools can help recover everything if needed.
tt2 -
I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?
Go to: Apple > Force Quit
and select Mail > Force Ouit. -
I have Iphone 5S and I never updated from IOS 7.1.2 to IOS 8 and now this morning I noticed that IOS 8.0.1 was available but since it had bugs it was removed, so can anyone tell me if I can update to IOS 8 not 8.0.1 but just IOS 8?
No its not out yet, when I went in to settings it still says 8.0.1 and I just searched on google, it says IOS 8.0.2 will come out in a few days. I just want to get IOS 8, I don't care about IOS 8.0.1 or 8.0.2 .
-
I have edit access to someone else's calendar. In iCloud i can add an event to this calender. In My calendar on my Mac I can see the calendar in the list, but when I try to add an event to this calendar, it is not avail from the list in event to select. Any help appreciated. Thanks
Hi Chris,
You can't get rid of an alert. The least you can have is one that says "none".
Nevermind, I see you learned how to edit the event. -
I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?
Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.
-
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry -
iTunes Match info says"With iTunes Match, you can download some or all of your music directly from iCloud on a total of up to 10 devices and computers." but when I try to add a computer it tells me i have reached my maximum of 5 computers.
You have old computers authorized that you are no longer using more than likely.
From http://www.apple.com/itunes/features/
Authorize and Deauthorize
Purchases you make from the iTunes Store can be played on up to five computers that you authorize using your iTunes Store account name and password. To authorize or deauthorize a single computer, choose Authorize This Computer or Deauthorize This Computer from the Store menu. If all five authorizations are being used, you can deauthorize all your computers at one time by choosing View My Account from the Store menu and selecting Deauthorize All.
You can then restart the authorization process with each current device.
Maybe you are looking for
-
2011 iMac, Lion, iPod 3G, FireWire - charge yes, sync no
I'm posting this in both the iPod community and in the iMac community. My appologies to any who are bother by this... I just bought a 2011 iMac (21.5 w/ 2.5GHz i5) and it came w/ Mac OS X Lion (currently at 10.7.2). I have a WD MyBook Studio connecte
-
How to consume Web Service in ABAP WebDynpro
Hi I want to know the entire details about how to consume Web Service in WebDynpro application. regards Piyush
-
Left side of Safari 3.0.4 webpages won't print
Anything I print on my Samsung ML-2510 laser printer using Safari 3.0.4 (OS X 10.5) does not have the left side 1/16". The margin is only 3/16", and the right side has a wide margin. I'm loosing the first letter of each line. How can I adjust the mar
-
After upgrading from Logic 6 to 7 I get the following strange behaviour: When I start up Logic by double-clicking a song file that contains EXS24 instruments, the samples are loaded twice (according to the Progress window). Anybody else have experien
-
How do I upgrade purchased CS6, education edition, from trial?
I used the trial and it has expired. Now my product code won't work. It doesn't have enough numbers. HELP!