I'm having trouble using my track pad. The arrow moves but I can't click on anything.

I'm having trouble using my track pad. The arrow moves but I can't click on anything.

Oh thank you for posting on how to enter safe browsing! I had tried to disable add-ons, but couldn't make anything click to do so. So frustrating!
Anyway, after putting on the safe browsing, it worked *immediately*, so clearly the add-ons were the issue! I deleted a bunch I don't use anyway, and it's been working fine for hours.
Thank you!!

Similar Messages

  • I'm having trouble with email I changed the pass word but still can't receive mail it states it's not correct

    I Changed my pass word which I received conformation that it was changed but still can't get to my mail, it says that IMAP is not correct?

    Hello Joe,
    If you are having issues with getting mail on your iPhone, then go over the troubleshooting in the article below. If all the settings and passwords look good, then I would recommend removing the account and setting it back up. 
    Get help with Mail on iPhone, iPad, and iPod touch
    http://support.apple.com/en-us/ts3899
    Regards,
    -Norm G. 

  • Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

    Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
    To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad.  Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
    i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
    Thanks.

    It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
    Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
    Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
    Tom

  • My daughter is using old round airport at college. I set it up without protection. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out where I can set the it?

    My daughter is using old round airport at college. I set it up originally without password protection because my macbook was too new to recognize the old style airport. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out even using the  Airport admin how to establish a password.  Any suggestions?  Thanks.

    If it even has that built-in, you would configure it using Airport Utility. It would likely be in the Wireless configuration for first turning on security and then setting the required password. For Macs you should use WPA Personal if the option is present.

  • Time Capsule blinks yellow,when I go to airport utility to set up, it Says This apple wi-fi bse station doesn't have any DNS server addresses and might have trouble connecting to internet.  My internet works, but I can't back up anything. What do I do??

    Worked fine for about a couple of weeks after my son -law installed the time capsule.  I can access the Internet both from my wife's I phone and from my desktop.  I think that I need to get the DNS server numbers and put them in the two blanks; but where do I get them?  Thanks, Jim

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • Having trouble using my 5.1 surround sound speaker system and can't configure itunes to use it

    With my Logitech Surround Sound Speakers Z506 I am listening to music with itunes and i have 5 speakers total with a subwoofer, the configuration is two front, one center, two rear, and a subwoofer. The front , center and subwoofer are fine but the rear pair speakers do not have any playback with them. I am wondering if you don't mind helping me troubleshoot this problem.
    Thank you have a nice day
    Cole

    Well I'm not using Vista I'm using XP SP2 and I have the same problem.
    On the windows sound control panel there is a button called speaker volume. when you click on it you get a bunch of sliders with channels -8. Ive discovered that if I move the master sound control in any of the Creative Sound modes software Entertainment/Audio Creation or Gaming the channel sliders in the windows control panel numbered 3-7 all go to zero which stops the surround sound working. It leaves channels and 2 and 8 alone which can be changed with the sound control in the creative software.
    Even checking move all the slides together option on the windows control panel is cancelled as soon as I twitch the main sound control. It's driving me nuts. I keep thinking I must be missing something really obvious here but alas I can't think what.
    Ive tried lots of different solutions to no avail. Interestingly when I tried to use the autodriver update thing on the creative web site it said that i am using Vista and you'll have to download manually. Which I did and still didnt resolve my problem.
    Sorry no solutions just more problems lets hope someone can help!
    Edit - Just discovered - I have XFi Pro if I use the I/O Console volume dial it works fine, but if I use the software volume control it all goes wrong. Think I posted in the wrong thread as well as this is vista but it just seemed so relevant.
    Message Edited by Gramuldy on 04-29-2008 :45 PM

  • HT201210 having trouble restoring my I pad device

    Having trouble restoring my i pad 2 . When I attempt to use safari the screen has a black film and wont allow me to access the web, although I can see all the web addresses All the other areas work properly. So I tried to restore my i pad but I was not able to. Any help would be appreciated . Thanks 
       bill

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • I'm having trouble using Adobe Reader

    I'm having trouble using or uninstalling Adobe Reader, i get a message when the programme has been anitiated which says Adobe Reader has encountered a problem and needs to close, i went on to Adobe's website and it said try uninstalling Adobe Reader and then re-install it as this sometimes works, i tried un-installing it from the Add or Remove programme but that didn't work either as i got another message telling me that the patch package could not be verified and to make sure i have permission.

    Dear Mylenium.
    Sorry i don't quite understand your reply, What do you need to know?

  • Can i use a track pad and mouse at the same time

    can i use a track pad and a mouse at the same time

    If you mean can you have them both connected at the same time, then it's a yes. I have both connected and use the mouse for some functions and the trackpad for others... works a charm.

  • Im having trouble using Emoji on some apps since i downloaded ios5... Anyone else experiencing this?

    Im having trouble using Emoji on some apps since i downloaded ios5... Anyone else experiencing this? Ive tried every thing deleting emoji and apps and re-instaling to no sucsess?? Any help would be great thanks!

    YES! I am having a lot of AppStore problems since iOS 6. My 2 main issues are:
    1. AppStore crashes constantly or will just sit & spin then does nothing at all.
    2. If I search for a specific App, making sure my spelling is correct, AppStore will NOT bring the app up. Instead, it will bring up unrelated apps.
    Podcasts app does the same thing, as well as jumbling up dates. Very impossible to find the correct episode.
    APPLE, please tell me you are reading this and that a fix is quickly under way!!

  • Im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help?

    im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled  switched it on and off what next?

    Did you try downloading the movie from iTunes on your iPad?  I know it takes longer but I'd try that. 
    Also try to reset all settings. 
    Settings > General > Reset. Reset all settings. 

  • Why can't I enlarge fonts on pages by using my track pad?

    Why can't I enlarge fonts on pages by using my track pad? Please Help!!!!

    Hi,
    I have been trying out the Command+ option and its not the same. Using the track pad to enlarge images and text was by far better and more precise than using the command+ option.....

  • I am having trouble with my i pad it freezes it turns off by itself and the screen turns blue?

    I am having trouble with my i pad it freezes and it turns off by itselfI and screen turns blue?

    Start by rebooting the iPad by holding both the power and home buttons until the apple logo appears and it restart, ignoring the red slider if that appears.  See if that helps.

  • I just downloaded Mainstage, I'm having trouble using it, because it won't open, can someone help me out?

    I have the latest Mac Os update ... I downloaded Mainstage, it won't open... Why is that???  I've deleted it, reinstalled it, but I keep having trouble using it...

    Yu have to run the library upgrader - it is in your applications folder in the utilities folder - double click on it to exceute it - then launch iPhoto after running the library upgrader
    LN

Maybe you are looking for