I'm having trouble with adobe acrobat pro.

Hi,
I have had adobe acrobat pro for a few years now but suddenly it wont open files and says to contact customer support as there is a licensing issue.?

What version of Acrobat on what system? You need to be more specific. And provide the full text of the eror message.
Mylenium

Similar Messages

Trouble with Adobe Acrobat Pro installation from Creative Cloud

When I attempt to install Adobe Acrobat Pro from Creative Cloud, it will always fail on the first attemp. If I retry, it installs it. Then, when I open a pdf document, the application quits in seconds. I get a modal window with the license agreement. However, it is blank and the pull downs are empty. I hit a dead end.
This is so aggravating; especially when Adobe is charging me for my membership every month.
What gives? Can someone help with this?
Brian

Brian which operating system are you using? Do you receive any specific errors during the installation process? If you are using a Windows operating system then please uninstall Acrobat using the Programs and Features control panel. Once done then please try using the Acrobat Cleaner Tool available at http://labs.adobe.com/downloads/acrobatcleaner.html.
Also you mentioned that the EULA window is blank you may also want to see Blank EULA screen appears on Acrobat XI launch - http://helpx.adobe.com/acrobat/kb/blank-eula-screen-appears-acrobat.html. Solution 2 is not likely to be relevant unless you are using an operating system not currently supported by the Creative Cloud Desktop application.

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

Have you opened Acrobat and gone to Help>Updates to get an updated install?

Cannot get C7280 to scan with Adobe Acrobat Pro 8.0. Can you help?

I know this may not be the right place to post this, but here goes. I'm using 10.5.2 along with Adobe Acrobat Pro 8.0, a HP C7280 AIO connected to network via wireless. The normal software I use is HP Scan Pro.
Here's my problem. When I try to scan from Acrobat it will either open the scan pro software, show acrobat as the place to scan to in the bottom, but not do anything. If I "accept", it crashes Acrobat OR it will say it can't communicate, so either way it doesn't work. Any ideas how to make this work?
Thx

*"I know this may not be the right place to post this,"*
Try the Adobe forums: http://www.adobeforums.com

Can't open pdf created with Adobe Acrobat Pro

I can't open a pdf (that was created with Adobe Acrobat Pro) using Reader 11. However, the file will open with an older version of Reader (10.1.4) on another workstation. Is there any way to resolve the problem?

Reader 11 is not available for general release. If you participated in the beta program, there is a place for this discussion which you have been provided. If you did not participate in the beta program, then you should not yet have access to Reader 11. I have just checked the Adobe website and it is not available to download from there.

? How do I delete large blocks of empty space with Adobe Acrobat Pro?

How do I delete large blocks of empty space with Adobe Acrobat Pro?

How can you delete "empty space"? If you mean that you want to delete lines,
like in Word, so that the text afterwards will go "up the page", then you're
out of luck. You should do that in the original file, and then re-create the
PDF.

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread.

Error Message With Adobe Acrobat Pro 9 Free Trial Version

Hi,
I know that this is a holiday weekend, but I need assistance with Adobe Acrobat 9 Free Trial Version. I downloaded it, and then created a PDF file from MS Word 2007. I tried to print, but the "save as" command popped up. I had already saved it, so it already had a document name. I tried resaving it and it would not do so. Here's the error message that I received:
"Adobe PDF cannot access the file because it is in use by another application process. Verify that the file is not open by another application or process and try again.
I did not have another app open. Also, during this time, the software setup box kept popping up. I kept selecting the 30 day trial version, but nothing would happen after I selected the button. I am using the Vista OS on my computer. I also have the Adobe Reader 9 which I have had for a while.
I uninstalled and reinstalled the free version of Adobe Acrobat 9 and got the same result as described above. If someone can help me with this, I would greatly appreciate it. Thanks.
Michelle Williams

You have a problem. You cannot have Reader and Acrobat Pro on the same computer. It causes problems. Normally, I'd tell you to uninstall Reader and re-install Acrobat Pro, but doing so might make your trial fail and you cannot get two trials. For the moment when trying to create a pdf file, try printing to the the Adobe PDF virtual printer.

Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended. I am constrained to use Inventor 2009. When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4. I believe that following that update, I lost the ability to read in Inventor 2009 files. Acrobat Pro Extended now gives the error messages:
"Exception has been raised" followed by:
"Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above. I tried re-installing that update but now the installer gives the error message:
"No qualifying products found to apply this update."
Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
Has anyone else had this problem? Or is it just me?

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Issue with Adobe Acrobat Pro XI Version 11.1.10

Using Adobe Acrobat Pro XI version 11.1.10 when I try to delete a page I get an error message, "one or more pages are in use and cannot be deleted". I would like to delete the pages?

Hi Frank,
This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
Does this issue occur with that specific pdf or with other pdfs too?
How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
Regards,
Rahul

Whether Internet explorer 6 is compatible with Adobe Acrobat Pro 9.0

Hi,
My user is using Adobe Acrobat Pro 9.0 for our application.
In our application ,if the user clicks the view link then the pdf file will be generated....But the user is using Adobe Acrobat Pro 9.0 and when he clicked the view link the adobe acrobat opens with the message "There was an error opening this documetn.the file cannot be found".
But when i checked the application from my system am able to generate the pdf. Am using adobe reader 9.1

To answer the question in your title: System Requirements for Adobe Reader 9,x states
Intel® 1.3 GHz processor
Microsoft® Windows® 2000 with Service Pack 4, Windows Server® 2003 and 2008; Windows XP Professional, Home Edition, or Tablet PC Edition with Service Pack 2 or 3; Windows Vista® Home Basic, Home Premium, Business, Ultimate, or Enterprise with or without Service Pack 1
128MB of RAM (256MB recommended)
335MB of available hard disk space
Microsoft Internet Explorer 6.0, 6.0 with Service Pack 1, 7.0 or 8.0; Firefox 2.0 or 3.0

Unable to print with Adobe Acrobat Pro - latest version 10.1.10

Hi,
I have installed Adobe Acrobat Pro on my mac book air version 10.9.2. but am unable to print. When I print a PDF, it shows up in the printer icon as complete but when I go to the printer, nothing is there? Can someone help?

Hi Frank,
This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
Does this issue occur with that specific pdf or with other pdfs too?
How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
Regards,
Rahul

Problem with Adobe Acrobat Pro XI after installation on Mac

I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe. That's as far as it gets. Has anyone had this problem before?

Hi lsgahan,
Please try the following steps and let me know.
Delete all the files from following folders:
Library/Application Support/Adobe/SLStore
Library/Application Support/Adobe/SLCache
And, delete all files from following folder except cache.db
Library/Application Support/Adobe/Adobe PCD
Launch Acrobat and enter the serial number when prompted and check.
Regards,
Rave

How much cloud storage do i have with adobe acrobat pro?

Is there a limit to the amount of cloud storage that I have in adobe acrobat pro?

Hi sclegalnurse,
We are currently offering 5 GB of storage in Acrobat.com online accounts (which is separate from Acrobat Pro).
Best,
Sara

Trouble installing Adobe Acrobat Pro 11.

Recently purchased 10 (download) licenses for Adobe Acrobat Pro 11. During the install, we're getting the following error - "Adobe Reader cannot open acrobat pro 11 because it is not either not a supported file or because the file has been damaged". We've updated our reader to the current version, but are still getting this error message How can we fix the problem, so we can use the program?

uninistall adobe reader, then run the cleaner (http://labs.adobe.com/downloads/acrobatcleaner.html), then restart your computer and install acrobat pro.

I'm having trouble with adobe acrobat pro.

Similar Messages

Maybe you are looking for