I'm having trouble with Premiere Pro CC...

I cannot use the timeline at all, I have tried everything that I can think of I have used older versions of Premiere. I have just upgreaded from CS3 to the full service of creative cloud. Help me please

What is the actual "problem"?
Have you done any tutorials?
Have you opened a Sequence in the Timeline?

Similar Messages

I keep having trouble with my pro it keep asking me password for my yahoo account

I keep having trouble with my pro it keep asking me password for my yahoo account

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your phone number from your post.
If you can't remember the answers then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) - but some recent posts are saying that Apple have temporarily suspended the reseting of security question/answers whilst account security processes are improved, so it may take longer.

Capturing Troubles with Premiere Pro CS5.5

Hello!
I am fairly new to Premiere and I'm having a little trouble with the capturing option.
I have Premiere Pro CS5.5, a MacBook Pro (13 inch), a Sony HDR-CX 110 camera connected to the MacBook with an HDMI cable and a HDMI displayport adapter.
I think I have everything I need to get it connected but it seems that whenever I select capture the window that pops up tells me that my device is offline.
I have a 13 inch MacBook Pro. I bought it in August of 2010. I have a Sony HDR-CX 110 camera. I have it hooked up to a HDMI Displayport adapter via a HDMI cable and the camera is plugged into the wall and turned on playback mode. I know the displayport works because I have a dual monitor set up and the adapter works because I have connected my TV to my Mac so there should be nothing wrong with the adapters and ports. But for some reason the camera doesn't appear to show up whenever I try to do this capturing option.
The camera's box does say "compatible with iMovie" and I have been able to import footage I collected without the camera plugged in to the computer, such as a guitar performance and an interview. That process was pretty simple and was connected to my computer via a USB.
Now, I think that maybe I'm just trying to do something more advanced with the camera and the camera can't do it. But if I am wrong (and I hope I am) I don't where to go from here? Any help would be so greatly appreciated!
Thank you =)

That will only work if your camera HAS a firewire connection... I think for Mac it is call iLink, but since I'm Win I'm not sure about that
Just do what was said and copy the folder to your hard drive and import from there

Having Problems with Premiere Pro crashing

Greetings all,
We have been having problems with Premier crashing and we have tried everything to fix, I was reaching out to this community to see if anyone has seen this before.
Exception code: 0xe06d7363
Fault offset: 0x000000000000940d
Faulting process id: 0x1894
Faulting application start time: 0x01ced6f8a66eee8c
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 06533511-442c-11e3-94ca-d067e551f5b6
Faulting application name: Adobe Premiere Pro.exe, version: 6.0.3.0, time stamp: 0x505748bf
Faulting module name: MSVCR100.dll, version: 10.0.40219.1, time stamp: 0x4d5f034a
Exception code: 0x40000015
Fault offset: 0x00000000000761c9
Faulting process id: 0x350
Faulting application start time: 0x01cee4cd89040e74
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Faulting module path: C:\Windows\system32\MSVCR100.dll
Report Id: 9209dc6a-50c1-11e3-b267-6480996eb95c
It just seems to crash all the time.

https://encrypted.google.com/search?q=0x40000015

Having trouble getting premiere pro trimmed clips into compositions

I'm working on a TV intro mashup in the style of the tv show happy days with another editor. I'm a complete noob with after effects. I've never used it before for anything. The other editor has created template in after effects of the record player with compositions of the actor intros in the center of the record and sent me the project. He's created a composition for each character intro and I'm trying to go in and replace the clips he used as place holders with clips i've trimmed in premiere pro.
At first I was successful by dragging and dropping the premiere pro sequence into the after effects project. Then when I looked at the sequence composition I could see the trimmed clips and could copy paste the clips I wanted into their respective intro compositions. I noticed the first time I imported the sequence into after effects and made changes to it in premiere pro it updated in real time. Now all of a sudden any changes I make to the premiere pro sequence no longer update in after effects. What's weird is they do update to the extend if I watch the sequence play in the after effects viewer I can see the changes but on the timeline where the clips are laid out the changes aren't reflected and it's showing me an earlier version of the sequence.
So my two main questions are
1) how come the time line in after effects is no longer updating the changes I make to the sequence in premiere pro?
2) what is the easiest way to get trimmed premiere pro clips into after effects compositions?

Question 1:
Since you're so new to AE, it's quite possible that any of a number of things happened without you being aware of it. That and you haven't given much information for troubleshooting. I mean, we don't even know the rough versions you're using, much less minor version numbers. (For example, we don't know if you're using CC 2014, much less if you're running the 13.2 update for AE or not.) Here's some info we would need to help: http://forums.adobe.com/thread/961743
http://forums.adobe.com/thread/961743
Question 2:
You can choose File>Import Premiere Pro Project and it'll bring the clips in. It won't update at all, but it will give you the clips you need in a way that's easier to deal with in AE.
Alternatively, you can choose to dynamically link a Premiere Project (which sounds like what you initially did). In most cases, I prefer the first way.
Since you've never used AE before, there are going to be a lot of things that frustrate you if you try to plow ahead without a knowledge of the basics. I strongly recommend going through the resources linked here: Getting started with After Effects Granted, there is an extensive set of resources there, but that's because AE is such a deep and complex program. Without a foundation in the basics, you are going to just keep on being frustrated.

Trouble with Premiere Pro and what to reinstall the program.

I have a Creative Cloud membership for photographers. Now I´m starting to use Premiere Pro that is installed throught this membership. But when I upload .MOV files to Premiere Pro I get a Error message, that premiere Pro doesn´t support this file? Witch i kind of odd? I know that this is an approved fileformat. Saw on a forum that you might get rid of that problem by installing the program again. How do I do, to reinstall Premiere pro? I can only see that I can install a testversion but I´m not interested in this. Because I already have a membership. I did change one of my disks in my desktop a few week ago, and maybe that´s whats causing this problem.

Premiere Pro is not part of the photography bundle, so beyond the trial you won't be able to use it. The rest we can't know. You have not provided any system info or otehr details like the source and type of your MOV files and whether you can e.g. import them in Photoshop. MOVs are Quicktiem files, so if you haven't even installed that, this is the first thing to do.
Mylenium

Anyone having trouble with Logic Pro purchase?

I am unable to purchase Logic Pro -- it gives me an error 100 saying that they are unable to process my request at that time and to contact iTunes stores. I have had no luck with iTunes store help staff and all they do is send me links to others having same issues.
I have no issues with purchase of other apps. Just Logic Pro.
Any ideas/thoughts?
--Mo

Maybe they're about to take it off the appstore...in favour of Logic X

CS5: Having trouble with HDR Pro.

I just got my copy of CS5, and tried HDR Pro. The main HDR Pro screen cuts off at the bottom, hiding (presumably) the OK and Cancel buttons and whatever else is there. I have to Force Quit my way out of CS5. Other CS5 screens that I checked show no such problem. CS4 and PSE8 and PSE9 never had this problem on the same computer and OS. What's going on?
I am using an iMac with OSX 10.6.8.

Any information?

(Cross Post! SORRY!) Having trouble with Mac Pro and Vista/Boot Camp

I feel like this board is more populated, so I thought I'd post this here as well. Forgive me.
Ok, so it took me forever to install Vista. It kept saying my partition wasn't valid even after I'd format it. After restarting like 15 times it finally went through. So, it installed.
BUT, now I have two issues. When Vista starts, I get this weird jumble of like MS-DOS text talking about partitions, weird numbers, my monitors just flash and kinda go nuts with the text then at the top after like 10 second of text, it says 'booting windows vista' with more ms-dos text. Finally after 30 seconds of that, it shows me that green bar that shows up to load Vista then voila, Vista is up and running. The OS works fine, but no matter what, I go through that jumble of text. Any way to get rid of it? What's wrong with it?
Also, now that I've installed Vista, I can't get back into OS X. I have a wireless PC keyboard and a wireless bluetooth Apple keyboard, so I don't know what to do. When I go into Vista's Control Panel to select Startup Disk it says it can't load the program. So I'm at a loss. I really wanna get back into OS X!
Any help would be fantastic!!

Ok, I fixed the issue by using the wireless PC keyboard. I put the Vista install DVD in the drive and restarted the computer. The computer wouldn't recognize the OS X DVD.
I remembered that the computer would register the keyboard inputs after restarting from the Vista Install Screen, so I restarted, held down alt on the PC keyboard and it worked!
Now with the apple keyboard working, I restarted and reset the PRAM which made the computer boot into OS X by default instead of Vista.
BUT, I still get that weird DOS text every time I load Vista, and now after keeping Vista running for a few hours, it starts kinda glitching over time. It loses connection with the network (I had to physically unplug and plug back in the ethernet cable to get it to recognize the network) and for some reason in order to use my apple keyboard, I have to turn it off and on when I get into Vista. It's annoying.
Anywho, if anyone can help me with my Vista problems, that'd be grand :P

I'm still having problems with Premiere Pro CS6

I downloaded the program but it didn't open so I tried to redownload it but it still didn't open! I have Windows 7 and it was supposed to work as the others Adobe programs I have! I tried to remove it with the Cleaner Tool and redownload and it doesn't work...Nothing seems to work and I'm getting upset, maybe I will cancel it...
Somebody help me?

eject!! eject!!!
hahahahahahahahahahaha!!!!

I'm having trouble downloading Premiere Pro CC and after effects

I am using the cloud however the requested software is not showing up.please assist me.

Adobe's MINimums http://www.adobe.com/products/premiere/tech-specs.html
-Programs won't display if they will not install on your computer
-http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
This is a user to user forum, I think you need Adobe
Adobe contact information - http://helpx.adobe.com/contact.html
Adobe Knowledgebase http://www.adobe.com/support/
Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
Next link has a "Chat Now" button near the bottom
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Having trouble with macbook pro dock at the bottom of the screen

I have a 13'' macbook pro, and i now have 2 different docks at the bottom of my screen. One is functional and the other one is not. How to i get rid of one of the docks?

Please post the age of your MBP, IE what year is was made, IE what year Model is it. and also as above a image/picture of the screen (a Screen Shot may not do it if the second Dock is some type of Ghost entry).
Other then that you have some type of software corruption or hardware failure going on. There should never be a second Dock at the bottom of the screen. So there is No easy fix for this problem. It may be hardware and if so that hardware would need to be replaced. Or is could be software corruption and in that case a Wipe of the drive and reinstall may be needed.

Is anyone else having trouble with surface pro 3 + kinect v2?

I'm running a cpu intensive Kinect v2 program on a surface pro 3 (all updates installed). It typically consumes about 50% of the processing when the cpu frequency is 100% (all CPU and networking, no graphics)
The problem is that sometimes when I run the program the cpu frequency (as reported by the resource monitor) does not move from it's idle state of 33% so my program chokes. If I remove the power cable, the cpu frequency immediately jumps to 100%. If
I then replace the power cable the cpu frequency will stay at 100%. My program will keep on running fine for a while and then the frequency will drop low again - I can then repair it by removing or replacing the power cable.
Obviously this program is intensive and the fans turn on to cool things down, so I originally thought it was a overheating problem, but the problem can occur immediately on running the program when the surface has just been booted and is completely
cold, or not occur when it's hot. I've tried the power options (not many on the surface) and they have no noticeable effect.
Does anyone have any suggestions as to how I can get the max performance from the cpu and keep it there? Why should the power cable have such an effect?
thanks
--Kim
--Kim

Are you running a WPF application or a c++ application? Try running any of the D2D samples at the same time, to see if that changes the behavior. When you boot the machine was power connected at the time? There are different hardware states
a system can be in based on running on battery vs plugged in. Is the system charging the battery at the time it is plugged in?
If on battery the assumption is you need to conserve which the operating system/hardware will operating in an energy efficient state until which time it is forces to run 100%(games or other graphic intensive work). CPU bound operations only may not trigger
the step up to full speed depending on how the operating system is handling the specific processes. The nature of WPF it was designed to update less often since line of business applications typically don't change the screen that often, so it was designed
to be more efficient that way. Where D2D/D3D applications run at full speed no matter what.
Carmine Sirignano - MSFT

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

Punch the computer's serial number here and check your coverage:
https://selfsolve.apple.com/GetWarranty.do

I'm having trouble with Premiere Pro CC...

Similar Messages

Maybe you are looking for