I'm having trouble with uploading two documents to iCloud from pages.

On my iPad2, two documents continue to have the blue 'updating' bar at the bottom and Pages continues to say "updateing 2 items" with the little spnning wheel. I've got plenty of space available both on the iPad and iCloud. Other documents are uplaoding just fine. The two documents are between 4 and 5 pages of text only. Any ideas?

The easiest way to set up to most provider routers is to set up the time capsule to bridge mode with dhcp enabled--meaning the time capsule pulls an IP address from the providers router. Then connect the other express or extreme to time capsule using apples built in bridging.
Doing it this way gives your network one dhcp server--the providers router. This way you will be able to reach all your providers tv receivers for the app controllers because all devices will be on the same subnet.
The trade off is the controlling device for firewall and ports is the providers router. So if you want remote access to your hard drive in the time capsule you will need to allow this through the providers router.
To me it sounds like you have 2 dhcp servers and when you reboot the dhcp server that boots up the quickest give the IP address out. Then when the time to live timer expires and the devices needs to check and make sure it is still good with its IP address another dhcp server steps in and causes your issue.

Similar Messages

  • To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave F

    To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave Files I have stored into the Software of Flash!. Could you please help me get this matter resolved? Gerard Hargrove.

    what exactly are you trying to do and attach a screenshot of the error message, if it's in english.

  • Having trouble with connectivity, no internet connection away from home

    Having trouble with connectivity, no internet connection away from home, can't check Facebook, weather, scores.......

    if you don't have a dataplan and rely on wifi for internet that is how it works
    if you do have a dataplan it sounds like it's not set up correctly in which case you should contact your carrier

  • I am new to Mac and am having trouble with uploading images from my pictures folder to Facebook and other share sites- some of my images are accessible while others are seemingly locked....

    I am new to Mac and am having trouble up loafing images from my pictures folder to photography sites and Facebook. Some of the saved images are accessible, while others are not, ( they are light colored and cannot be uploaded) I am not saving them any differently.

    Hi Robodisko,
    Thanks for your prompt reply...... 
    I often proof my work in preview then edit images in photoshop and rename from there.  The dsc images are renamed to correlate the name of the class etc.  i.e. dcs_001 is saved as the file name required 7A.jpeg etc.
    The file names are required to correlate what is what and so on..........

  • Acrobat 6.0 Professional- Having Trouble with a Large Document-Please Help

    Using Acrobat 6.0 Professional.  Working with a large document (1400 pages, 25 megs).  I broke it into two parts to make it easier to work with.  However, even though the two parts are now 700 pages, they are each still 25 megs.  It appears that each document is retaining the full history of the document, perhaps as restore points.  How do I purge the history so the document is small and more manageable?

    I am not sure if version 6 can optimize PDF files but in version 9, you have to follow these instructions:
    Optimize a PDF
    Note: Optimizing a digitally signed document removes and invalidates the digital signatures. 
    Open the PDF Optimizer dialog box.
    To use the default settings, choose Standard from the Settings menu, and then skip to step 6. If you change any settings in the PDF Optimizer dialog box, the Settings menu automatically switches to Custom.
    From the Make Compatible With menu, choose Retain Existing to keep the current PDF version, or choose an Acrobat version. (The options available in panels vary depending on this choice.)
    Select the check box next to a panel (for example, Images, Fonts, Transparency), and then select options in that panel. To prevent all of the options in a panel from executing during optimization, deselect the check box for that panel.
    (Optional) To save your customized settings, click the Save button and name the settings. (To delete a saved setting, choose it in the Settings menu and click Delete.)
    When you are finished selecting options, click OK.
    In the Save Optimized As dialog box, click Save to overwrite the original PDF with the optimized PDF, or select a new name or location.To optimize several documents at the same time, use the Output options for the Batch Processing command.
    It is worth a try assuming you have this facility in version 6.
    Always backup the document before doing this.
    Good luck.

  • Anybody having trouble with InDesign CS2 documents on a network drive?

    I just set up my Airport network at home (Airport Extreme base station, external hard drive plugged into the USB port, iMac G5 plugged into one of the Ethernet ports) and have run into a peculiar problem. When working on my iMac (connected vie ethernet) I open an Adobe InDesign CS2 document from the USB network drive. After a minute or so InDesign tells me something has gone wrong and it is shutting down. I immediately re-launch InDesign and it does its auto-recovery and immediately shuts down again. If I re-launch again and it asks if I want to begin auto recovery it immediately shuts down again. Only by telling it "no" to auto revoery can I break the cycle and let InDesign launch normally. However, if I then go to the file I was working on and attempt to open it, InDesign shuts down. I know that InDesign creates a temporary Lock file when you open a document. My guess is that somehow the lock file is getting corrupted and preventing InDesign from opening this file. InDesign documents are the only file types thus affected, Illustrator and Photoshop are fine. I have a second hard drive connected via Firewire and have never had any problems with files from it. My question is, what would be causing the problem on my network drive connectd to the base station? Am I the only one out there with this problem?
    iMac 1.8 GHz PowerPC G5 20   Mac OS X (10.4.9)  

    I just set up my Airport network at home (Airport Extreme base station, external hard drive plugged into the USB port, iMac G5 plugged into one of the Ethernet ports) and have run into a peculiar problem. When working on my iMac (connected vie ethernet) I open an Adobe InDesign CS2 document from the USB network drive. After a minute or so InDesign tells me something has gone wrong and it is shutting down. I immediately re-launch InDesign and it does its auto-recovery and immediately shuts down again. If I re-launch again and it asks if I want to begin auto recovery it immediately shuts down again. Only by telling it "no" to auto revoery can I break the cycle and let InDesign launch normally. However, if I then go to the file I was working on and attempt to open it, InDesign shuts down. I know that InDesign creates a temporary Lock file when you open a document. My guess is that somehow the lock file is getting corrupted and preventing InDesign from opening this file. InDesign documents are the only file types thus affected, Illustrator and Photoshop are fine. I have a second hard drive connected via Firewire and have never had any problems with files from it. My question is, what would be causing the problem on my network drive connectd to the base station? Am I the only one out there with this problem?
    iMac 1.8 GHz PowerPC G5 20   Mac OS X (10.4.9)  

  • I am having trouble with contacts syncing (CardDAV vs iCloud)

    I found that a number of recently added contacts do not sync across iCloud (devices). I have read several forum threads and can't seem to find a solution. I digging into my group text app (Text2Group) I discovered that somehow the missing contacts are not in iCloud but CardDAV. I added them in my phone by opening contacts and tapping on the + symbol in the upper right hand corner of the screen. I did the same thing over the years and never had this problem before upgrading to iOS 8 and then 8.1.1, or at least noticing it recently..
    I logged out and back in from both devices. turned off/rebooted my iPhone. The contacts I added today on my MacBookPro (13-inch, Mid 2009, 8 GB ram, OS 10.9.5) today appear on both my iPad Mini and Phone 5S....
    Any thoughts other than manually adding the phone CardDAV-contacts to iCloud so the will syn. All of the contacts in CardDAV can be found in contacts, but cannot be added to groups.  Baffling

    You can sync/manually mange iphone with one and only one computer.  If you sync/manually mange to anther, then it will erase the current content and replace with content from the new computer.
    What "trouble" are you having?

  • I'm having trouble with seeing all that is shown on pages and on my email page

    I have trouble seeing all the photos and on my e-mail home page and e-mail compose page I can't see evrything

    See:
    * [[Images or animations do not show]]
    * [[Websites look wrong]]
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • I'm having trouble with my airport express continually disconnecting from my network.

    I have my airport express set up to extend my network wirelessly from my Airport Time Capsule base station.  My base station is setup in the basement connected to my Comcast internet router (Motorola Surfboard SB6141).  My Airport Express is on the main floor in our computer room and is connected via ethernet cable to my iMac.  About 1x/day the express drops connection to the Time Capsule and the only way I can seem to get the extension back up and running is to stop/start the Time Capsule.  Any ideas on what is wrong?

    The easiest way to set up to most provider routers is to set up the time capsule to bridge mode with dhcp enabled--meaning the time capsule pulls an IP address from the providers router. Then connect the other express or extreme to time capsule using apples built in bridging.
    Doing it this way gives your network one dhcp server--the providers router. This way you will be able to reach all your providers tv receivers for the app controllers because all devices will be on the same subnet.
    The trade off is the controlling device for firewall and ports is the providers router. So if you want remote access to your hard drive in the time capsule you will need to allow this through the providers router.
    To me it sounds like you have 2 dhcp servers and when you reboot the dhcp server that boots up the quickest give the IP address out. Then when the time to live timer expires and the devices needs to check and make sure it is still good with its IP address another dhcp server steps in and causes your issue.

  • Having trouble with Flash I think playing audio from Web?

    No device
    Hi All, I'm new here so sorry if I'm not asking this in the right place.
    Here's the deal. My fiancées mom bought this touch pad so she could listen to my Fiancées radio show on line.
    http://www.tnsportsradio.com/on-air/
    I can get to the site but the audio won't stream.  Can someone tell me if it will work for them?
    If it does, what can I do to get it to work for the future MIL?
    If not am I SOL?  If I can't get this to work for them it goes back.
    Thanks in advance,
    Justin

    I have two TouchPads, both have Android installed on them.
    I booted the 16gb one back into webOS, and you are right - it won't play.
    The other, using Android ICS as it's OS was able to pull up some of the DJ's, and I was able to listen to shows.
    I suggest you check out the "Android on the TouchPad" section of webosnation.com to consider loading Android onto your device.  Officially, we can't support this option here on HP's forum, so all liability will be yours if you choose this option.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • HT4528 Having trouble with my apple password.  ICloud and Dropbox both accepted my new password because they woulod not accept my apple password

    Need help sorting out apple ID.  Icloud and Dropbox asked for a new ID which worked fine. Why does it not work on my new iphone to get the dropbox app?

    Ben
    I had a similar issue with my iPad, it was asking for what essentially was a username - back before you needed an actual email address, god knows why, so I ignored it during the setup process and once the home screen loaded up it asked my for my details and hey presto it was fine.
    If you don't get asked for your details right away you can add them by going to Settings>iTunes & App Store
    Regards,
    Steve

  • Seems we're all having trouble with copyright watermarking. Any response from Adobe?

    [LR 3.0 WIN] I've looked at the discussions here on the the topic, and there seem to be loads of problems and no answers. I thought LR3 was an upgrade from LR2, so was hoping the copyright marking of web images would be as good as or better, but in this respect it feels more like a downgrade.
    I have loaded copyright information into the Copyright metadata field of all my (RAW) images for a web gallery. When I choose Simple Copyright Watermarking I see nothing on my large images (which are web size). Even if something were visible, there appears to be no control over its size or position. When I choose and set up a Watermark Preset, I can use fixed text or graphic, but apparently nothing that relates to the Copyright metadata. Like many people, I produce galleries with work from various authors, and each needs its own copyright marking. As things stand, I can't use LR3 for my web galleries (one of the main reasons I upgraded), and will have to continue to use LR2 for this.
    Can we please have a comment from Adobe, to tell us where we're all going wrong, or a promise of an early fix?

    It is a bug and I hope the bug should be fixed in the next release.
    The longer term fix may rely on tokens, but I feel the better place to look is the Edit Watermarks dialog. At the moment you can choose Text or Graphic, but not a metadata field that's varied with each image.
    The other day I had a need similar to Alan's, but in Export. I had images from multiple photographers, and while Simple Copyright Watermark works in Export it was useless in my case because the client wanted the watermark in the top right. I therefore had to create one watermark preset per photographer, and run one export per photographer. I did look into doing this by a plug-in but (a) Export requires links to a preset (b) you can't create watermark presets on the fly (c) text file edits to an existing watermark preset aren't picked up by LR without a restart.
    Giving Edit Watermarks the option to pick up a metadata field would resolve more than the Web problem, and Simple Copyright Watermark could then be retired.
    John

  • Trouble with the bookmark sync in iCloud - Mac to Mac

    Im having trouble with the bookmark sync in iCloud between and iMac and MBPro, both running OSX Lion 10.7.3 and Safari running 5.1.3
    The following is now how my addresses show up in when i try to view the bookmarks
    file://localhost/Users blah blah blah then the www.address.
    any help...this was working last week and i marveled at the ease of it...
    now im utterly frustrated!
    any help greatly appreciated.

    Hi,
    Quit the Mac App Store if it's open. Command + Q. The iTunes and Mac App Store are one in the same.
    Launch iTunes then from the iTunes menu bar click iTunes / Preferences then select the Advanced tab.




    Click: *Reset warnings and Reset cache*.



 Now from the iTunes menu bar click Store / Sign Out.


    Try the Mac App Store.

If you still have problems, follow the paths here. 

~ (Tilde) represents your Home folder.
    ~/Library/Caches/com.apple.appstore/Cache.db. Move the Cache.db file to the Trash.


    ~/Library/Preferences. Move the com.apple.appstore.plist and com.apple.storeagent.plist files to the Trash.


    ~/Library/Cookies. Move the com.apple.appstore.plist and Cookies.plist files to the Trash.

Restart your Mac.

Relaunch the MAS, try again.
    If that didn't help, from the iTunes menu bar click Strore / View My Account. Make sure all the account details are correct including the Security number from the back of an ATM or credit card.
    Carolyn
    Message was edited by: Carolyn

  • TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

    I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

    Aha! I have sorted it.
    For those with similar problems, the solution is this:
    Macintosh HD > Library > Audio > MIDI Drivers
    Then delete DigiDioMidiDriver.plugin

  • I have been having trouble with inserting pages in a document in indesign

    having trouble with inserting pages in a document in indesign

    You're going to give us more information for us to help you.
    What operating system? What version of InDesign? What happens when you insert a page (and how are you choosing to insert a page)? Does it happen with just one file, or does also happen on a clean new file?

Maybe you are looking for

  • Issue displaying content on iframes.

    Hello everyone, I am trying to display a few pages on an iframe for a few seconds each on a loop.  I have been able to display content on the iframe when I do it by adding this line. frame1.Attributes["src"] = "http://intranet.contoso.com/sites/Repor

  • Hr...bdc for pa40-salary increment

    HI FRIENDS.. M NOT ABLE TO FETCH VALUES FOR TABLE CONTORL IN PA40 T.CODE FOR SALARY INCREMENT.. ACT D PROBLEM IS.. THE OLD SALARY SRTUCTURE IS DIFFERENG FROM CURRENT SALARY STRUCTURE IN EXCEL SHEET.. DOES ANY1 HAVE THE BDC FOR SALARY INCREMENT ..? PL

  • SAS Support Driver x4200

    Hi there, I am trying to install Microsoft Windows Server 2003 Enterprise Edition (this is a supported o/s) onto a x4200 server. Part of the install requires the addition of a driver which can be downloaded and install as per this document . . . 819-

  • Why was the "I'm Feeling Lucky" functionality removed from the Firefox awesomebar in all releases after version 3.6?

    In Firefox 3.6, when I type something specific, like "wikipedia steve jobs" into the url bar, I am taken directly to Wikipedia's page for Steve Jobs, and if I type something less specific, I am taken to a Google search results page for what I typed i

  • Tables within Tables Question

    Hello! I have been searching through the forums and can't seem to find an answer. Maybe it's just that I am not sure what I am looking for. I am trying to build a table  that has a 1 large picture next to 6 small ones. I figured that I could be a tab