I'm having trouble with using Calculated-User Can Override, it will not honor my overide

I'm having trouble with using Calculated-User Can Override, it will not honor my overide. I'm using LiveCycle Designer ES v.8.2

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Similar Messages

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Hi having trouble with camera roll photos - can not see them in i tunes

Hi having trouble with camera roll photos - can not see them in i tunes. Is adobe photoshop the only program I can use?

You don't see them in iTunes. In theory your computer should see the device as a camera and you should be able to transfer the photos in the same way as if you'd connected a 'proper' camera to your computer (this only applies to photos taken with the device or saved from emails/websites etc, it doesn't apply to photos that were synced from your computer). There is some help/guidance in this article for transferring photos to your computer : http://support.apple.com/kb/HT4083

I have an iPhone and just goy I pad but no computer I'm trying to synch them together but having trouble with iCloud and I can't seem to subscribe for iTunes match from either devise

I have an iPhone and just goy I pad but no computer I'm trying to synch them together but having trouble with iCloud and I can't seem to subscribe for iTunes match from either devise

You first have to subscribe to iTunes Match through iTunes on your computer and have your music library in iTunes uploaded/matched before you can enable it on your iOS devices (see http://www.apple.com/itunes/itunes-match/). Without a computer you won't be able to use iTunes Match.

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Date Calculated - User Can Override

Please help. I am having difficulty with the Date "Calculated - User Can Override" value. I need the date to default as current but have the user to be able to change it if necessary. I have chosen the value as "Calculated - User Can Override". You can change the date, but when you exit the field it changes back to the current date. Please tell me exactly what I need to do.
Thank you,
Angie

Copy this line from the "
layout:ready" event and paste it into the "
Initilize" event.
b In FORMCALC:
> $.rawValue = Concat(Num2Date(Date(), "YYYY-MM-DD"))
Here I give you an example of it:
CurrentDateExample.pdf
Good luck,
Dan

I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentione

I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentioned since they were purchased. Is there any way to get the ipad music transferred to the computer?

And they were definitely purchased from the iTunes store, they show on the account's purchase history (Store > View Account on a computer's iTunes, or you can view the last 90 days purchases via http://reportaproblem.apple.com) ?
You could potentially log into the account on that computer's iTunes (Store > Sign Out to log out of your account, that will then change to a Store > Sign In option) and redownload them by clicking on the id towards the top right of the iTunes screen and Purchased on the popup :
But that will potentially tie that computer to that account for 90 days : Manage your associated devices in iTunes - Apple Support
Or do you have a different computer that you could redownload them on and then copy them over to that computer via a flash drive or memory card, and then add them to its iTunes via File > Add To Library ?

Having trouble with iso8. If i factory reset will it help ?

Having trouble with iso8. If I do a factory reset will it help?

Hi there Jeanatlightwood,
Depending on the trouble you are experiencing, restoring as a new phone (factory reset) can be a good troubleshooting step. Be sure to back up your information before hand. The article below has more information.
Use iTunes to restore your iOS device to factory settings
-Griff W.

Having trouble with using crypto in JC 2.2.2

Hi,
I am using the sourceforge Eclipse plugin for my project. Eclipse version is 3.5.
My JC version is 2.2.2. When i debug my code (Using the debug mode) the program terminates at
keypair = new KeyPair(KeyPair.ALG_RSA_CRT, (short)1024);
In the debug window (Variables) I get the cause and theSW as (0, 3) which i think implies CryptoException - NoSuchAlgorithm.
I don't understand why this shows.
It does not generate any stacktrace and shows stacktrace as null.
My code:
package test;
import javacard.framework.APDU;
import javacard.framework.Applet;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.security.*;
//import javacardx.crypto.*;
public class Test extends Applet {
// Private Objects
private static Key privateKey;
public static Key publicKey;
private static KeyPair keyPair;
// Private Debug objects
private byte flag = 0;
//standard APDU input offset values
public final static byte THIS_CLA = (byte)0x90;
// This is the INS for starting to generate 1024 bit RSA keys
public final static byte GENERATE_RSA_KEYS = (byte)0x20;
// INS to sign provided hash
public final static byte COMPLETE_TRANSACTION= (byte)0x22;
// INS to return Status of Applet.
public final static byte INITIALIZE_UPDATE= (byte)0x24;
// INS to reset keys
public final static byte COMPLETE_UPDATE= (byte)0x26;
// dummy byte sequences returned by this applet
private final static byte[] INIT_SEQUENCE = { (byte)0xff, (byte)0x2 };
private final static byte[] COMPLETE_SEQUENCE = { (byte)0x1, (byte)0x3 };
private final static byte[] INIT_UPDATE_SEQUENCE = { (byte)0x1, (byte)0x2, (byte)0x3 };
private final static byte[] COMPLETE_UPDATE_SEQUENCE = { (byte)0x1, (byte)0x1 };
* Constructor.
* Only this class's install method can create the applet object.
private Test() {
//perform some initialization here
register();//register this instance
* Installs this applet.
* @param byteArray the array containing installation parameters
* @param offset the starting offset in byteArray
* @param length the length in bytes of the parameter data in byteArray
public static void install(byte[] byteArray, short offset, byte length) {
new Test();
* Implementation of the standard method for processing an incoming APDU.
* @param apdu the incoming APDU
* @exception ISOException with ISO 7816-4 response bytes
public void process(APDU apdu) {
byte buffer[] = apdu.getBuffer();
//@SuppressWarnings("unused")
flag = 0;
if (buffer[ISO7816.OFFSET_CLA] == THIS_CLA) {
switch (buffer[ISO7816.OFFSET_INS])    {
case GENERATE_RSA_KEYS:
//writeBack(apdu, INIT_SEQUENCE);
generateRSAKeys(apdu, INIT_SEQUENCE);
flag = 1;
break;
case COMPLETE_TRANSACTION:
writeBack(apdu, COMPLETE_SEQUENCE);
break;
case INITIALIZE_UPDATE:
writeBack(apdu, INIT_UPDATE_SEQUENCE);
break;
case COMPLETE_UPDATE:
writeBack(apdu, COMPLETE_UPDATE_SEQUENCE);
break;
default:
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
* An example method that writes back a given byte array through the apdu.
protected void generateRSAKeys(APDU apdu, byte[] bytes) {
//byte buffer[] = apdu.getBuffer();
try {
byte[] apduBuffer = apdu.getBuffer();
// Debug flag
flag = 9;
//privateKey = KeyBuilder.buildKey(KeyBuilder.TYPE_RSA_PRIVATE,KeyBuilder.LENGTH_RSA_2048, false);
//privateKey = KeyBuilder.buildKey(KeyBuilder.TYPE_DSA_PRIVATE,KeyBuilder.LENGTH_DES, false);
//publicKey = KeyBuilder.buildKey(KeyBuilder.TYPE_RSA_PUBLIC,KeyBuilder.LENGTH_RSA_2048, false);
// Debug flag
flag = 10;
keyPair = new KeyPair(KeyPair.ALG_RSA_CRT, (short)1024);
//keyPair = new KeyPair(KeyPair.ALG_RSA, (short)publicKey.getSize());
keyPair.genKeyPair();
publicKey = keyPair.getPublic();
// Debug flag
flag++;
((RSAPublicKey)publicKey).getModulus(apduBuffer, (short)0);
//    apdu.setOutgoing(); // set transmission to outgoing data
//    apdu.setOutgoingLength((short) apduBuffer.length);
apdu.setOutgoingAndSend((short) 0, (short) (publicKey.getSize()/8));
// Debug flag
flag++;
} catch(Exception e) {
flag = 0;
* An example method that writes back a given byte array through the apdu.
protected void writeBack(APDU apdu, byte[] bytes) {
byte buffer[] = apdu.getBuffer();
// copy bytes into buffer
buffer[0] = bytes[0];
buffer[1] = bytes[1];
// set apdu for data output
apdu.setOutgoing();
apdu.setOutgoingLength( (short) (2) );
// output header
apdu.sendBytes( (short)0, (short) 2);
// writes data
//apdu.sendBytesLong( bytes, (short) 0, (short) 0 );
} NOTE: Part of the code is from an online tutorial that i found.
Thanks for your help.

Hi,
That exception generally means that the platform you are running on does not support that crypto operation. This can be an indecator that the cipher you would use this key with is not available or the key size you are using is not supported.
I am not familiar with the Eclipse plugin you mentioned, but if you are using the Java implementation of the Java Card simulator (jcwde) provided with the JCDK, ti will not support crypto operations. There have been several posts on this topic recently that you may be able to search for that will give you more details about this.
On a coding note, you should not be using the new keyword outside of the applet constructor. In fact you should not be allocating new memory outside of this constructor. This is because you should not rely on garbage collection in Java Card as it is not be implemented on all cards. If it is available on a card it may be rather slow.
Cheers,
Shane
Edited by: safarmer on 27/10/2009 17:19

HT5295 with so many having trouble with downloading podcasts including me how soon will someone take care of this,1 postings was 2 weeks ago,hey support what are you waiting for?

I see several people having the same problem of podcasts not loading and 1 was 2 weeks ago,so hey support how soon will this be fixed?

rdankovcik wrote:
IS there a forum that apple monitors?
No.
rdankovcik wrote:
So basically, you are saying that apple could care less about user feedback?
This forum is a user-to-user forum - it always has been. It is designed so that we users can help each other.
You have to remember that sometimes an entire thread can be wrong. Perhaps the people posting about Podcast problems are wrong. Certainly, there is one thread that has been going on for some time, but the people with the problem seem reluctant to try any suggestions put forward to them, especially if the suggestion includes the thought that Apple may not be the cause of the problem. I use Podcasts all the time and rarely have any problems.
Apple (by the way) is not the cause of every single known problem in the universe!
That said, if you have a problem with Podcasts, why not tell us here and we'll see if anyone can help you?

I'm having trouble with a toolbar called searchqu that I do not remember installing, it will not allow me to have MSN as my homepage, I removed the add on but still have the problem. Thoughts?

had an add on installed somehow called searchqu. It will not allow me to have msn as my home page. I removed the add on and still have the same trouble.

Hi!
My name is John and I'm a member of the Searchqu support team, I'm here to assist! :)
When a software was installs onto your pc it offered two basic installs, typical installation, which lists the add-on features such as searchqu default search, and Custom installation, which allows you to select the add-ons that you wish to install. There's no need to worry if you did the typical install - this isn't a virus,
nor malware, and there's no need to Perform a virus scan against it.
In order to change Searchqu as your homepage please check the following: http://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page
For visual instructions please check: http://bit.ly/searchqutoolbar
We are here to help with any further question :)
The Searchqu support team.

I'm having trouble with Apple Id. How can I talk to a live person for help?

Automated Apple Support cannot help with my Apple ID and password problem. How can I talk with a live person to help me?

If you are having problem with your password then you can contact Support in your country and see if they can help.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

I'm having trouble with my payment method payment type it's not accepting any of my cards

Payment method/payment type will not accept any of my cards for payment it's saying my security codes are wrong there are available funds on both card

You have exactly the same name and address on your iTunes account that the cards are registered to : http://support.apple.com/kb/TS1646 ?
And when you say that there are available funds on the cards, do you mean that they are debit cards ? If they are then I don't think that they are still accepted as a valid payment method in all countries - from this page :
You may be able to use other payment types in your country, like debit and Maestro cards
which implies that they are not accepted in all countries, and there have been a number of posts about them being declined.

Having trouble with multiple wireless users on WRT54G router

Basically, there are 3 of us wirelessly sharing the internet via a linksys WRT54G router. I have our router password-protected, to avoid randoms stealing out broadband. I am a Mac user (3 year old computer), the other 2 are on PC laptops.
At the moment, I have an excellent internet connection, and it's working just fine. However, if my room mate connects with their laptop (a fairly new model), my internet connection stops working. I still have a signal, but it just really slows down/often stops working entirely. It's as if their wireless connection takes priority and ignores mine (essentially nullifying the router's purpose).
Has anyone come across a problem like this before? Your assistance would be super helpful and appreciated.

Hi, perhaps you may try the following steps to improve the performance of your router:
• Upgrade the router’s firmware
• Reset the router after the firmware upgrade
• Optimize the router’s wireless settings
• Use a wifi analyzer like http://www.metageek.net/products/inssider/ to set a non overlapping channel to the router
• Relocate the router on a more central location for better wireless coverage
• Avoid placing the router on a glass or metallic surface

I'm having trouble with using Calculated-User Can Override, it will not honor my overide

Similar Messages

Maybe you are looking for