I'm having 'Trust' issues when trying to connect our iPads to our PC's.

Our teachers have been taking photos on our iPads. In the past they were able to connect via USB, click ‘trust’ and download them onto our PC’s. Suddenly this is not happening anymore. The PC recognises the iPad, we click ‘trust’, you find the iPad on the list of drives, click to download photos and it disconnects and asks if we trust the computer again. This reoccurs until we eventually give up. It's becoming rather frustrating.
I have tried the old 'download the lastest drivers' etc.
We have iPad Minis running 7.1
Anyone suggest a fix?

Hello Slemarinel,
It sounds like you are having issues connecting your iPads to a computer to import pictures from it. I would use the troubleshooting from the following article to help troubleshoot the issue named:
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPad, iPhone, or iPod touch.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you have not already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
The USB chipset on some non-Apple computers may interfere with syncing.
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

  • I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone.  What the...?

    I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone.  What the...?

    Hi Boscoboi,
    Welcome to the Support Communities!
    You may need to check the settings for your iTunes Store on the iPad and iPhone.
    Sign out of the iTunes account, restart the device and sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311?viewlocale=en_US
    If these basic steps don't resolve your issue, then follow the advice in this article for connectivity issues with iTunes:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    - Judy

  • Having an issue when trying too back up my phone too my desktop gives me an error message saying the sync session failed

    recieiving an error message when trying too back up my iphone too my desktop
    the sync session failed

    Hi Shawn,
    Welcome to Apple Support Communities!
    The article below provides tips that should be able to help you resolve the backup issue.
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    -Jason

  • When trying to connect my iPad to my computer to download my info, the computer tells me iPad cannot be used because the apple mobile device service is not started.... What do I do to fix this?   Thanks!

    When trying to download my ipad2 by connecting to the computer it tells me that this iPad cannot be used because the apple mobile device service ia not started!  Help what do I do?

    Restart Apple Mobile Device Service
    http://support.apple.com/kb/ts1567

  • Having authentication issue when trying to add a subscription to an internal billing account

    I am trying to add a subscription to an account on the Azure Internal Billing Registration page.  But I am hitting an authentication error. How do I get someone to contact me so that I can get this solved?

    Hi,
    This issue is out of my scope, if you have any problems or questions about using Azure Internal Billing Registration or need help with a registration issue, please try to contact with the support: http://aka.ms/azdesk
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • We are having sync issues when trying to use separate user accounts and Apple ID's on the same iMac. What can we do?

    My wife and I share an iMac and we each sync to it using separate user accounts and separate Apple IDs. She has an iPad 2 and I have an iPhone 4. We upgraded the mac to Lion and the iphone to OS 5. Now itunes only recognizes my apple id no matter which user is logged in. Now if I download the Home Depot app to my phone it automatically gets pushed to my wife's iPad, which she does not want. We want to keep things separate. How can we do this?

    You can sync devices with the same iCloud ID, not seperate ones.
    If she has a different login on your Mac, make sure she has her own ID defined in System Prefs > iCloud

  • MTP Device Issue When trying to Connect my 5250 to...

    Hi All,
    I don't know what to try anymore. My phone just cannot connect to PC suite via USB cable. The bubble MTP device detected is popping up all the time and the connection is refreshed constantly so the devices cannot really connect.
    I read articles about this issue for 5800 and it was resolved by deleting certain folders in the phone but my phone just don't have these folders.
    Please assist!
    Happy Holidays!
    Yoanna

    Hi
    Try following the steps below.  I had the same problem a while back with my Nokia and gave up trying.  I recently tried to sync my Sansa MP3 in MTP mode and had the same problem.  Went to the Sandisk site and searched on MTP and they had the fix below.  MP3 player was fixed and then, out of curiosity, I tried my Nokia and it also worked.
    MTP Device Cannot Start code 10" error message
    I get an "MTP Device Cannot Start, error code 10" error message when I connect my Sansa player to a PC running Windows XP.  What can I do?
    1. Make sure you are logged in as an administrator
    2. If connected, disconnect your player from the PC
    3. Open your command prompt, click Start select Run 
    4. Type cmd  then press Enter
    5. Type the following after the prompt: Net localgroup Administrators local service /add then press Enter 
    NOTE: A "The command completed successfully" message should appear.
    6. Close the command prompt and reconnect the Sansa player.

  • Issues when trying to connect to Oracle database

    Hi
    We have set up a linked server in SQL Server to connect to an Oracle database. We are using SQL Server 2008 R2 Enterprise (64 bit) on Windows Server 2008 and Oracle client 11g 11.02.00.01 connecting to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production using UTF8.
    Most tables are selectable without error, however, we got this error message for some:
    Msg 7347, Level 16, State 1, Line 1
    OLE DB provider 'OraOLEDB.Oracle' for linked server 'OurLinkedServer' returned data that does not match expected data length for column '[OraOLEDB.Oracle].Ourfieldname'. The (maximum) expected data length is 6, while the returned data length is 2.
    This error message refers to a column of type char(3)
    Will the characterset cause this error (I’ve read that SQL Server doesn’t support UTF8)?
    If not, is there some other resolution that anyone can think of?
    Any suggestions are greatly appreciated.
    Thanks a lot!
    Tom

    Thank You for replying, Justin!
    Yes, I can connect successfully to the database through other tools - at the moment I tried SQL*Plus, Net8 Easy Config and Schema Manager.
    The Oracle client in the NT machine is 8.0.5.0.0. And unfortunately I do not know anything about the Oracle installation on this machine and at the moment I don't have that person near me too whom to ask also. But I think the installation was ok, because the connection through ODBC was working before the DB upgrade as far as I understood (sorry, again at the moment I don't know what was the previous version of DB. I will ask that information as soon as possible).
    The main problem that bothers me at the moment is that I can't install 8.1.* series OraODBC driver with 8.0.5.0.0 Oracle Installer. I managed to install 8.0.6.6.0 version of the driver, but not the newer ones. As far as I've understood I have to upgrade the whole Oracle in the NT machine to upgrade that installer. Am I correct?
    Regards,
    Madis Priilinn

  • Wi-fi working on other devices.  When trying to connect on ipad it states"unable to join network".  Some of my efforts have resulted in short term connection, but then I lose it again.

    anybody have any idea what would cause my wi-fi to state "unable to join network when all other devices are haveing no connection problem.?

    Try the remedies that are in this Apple support document on troubleshooting Wi-Fi.
    http://support.apple.com/kb/TS1398

  • Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

    Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1.  I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem.  Strangely enough  PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

    Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
    That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

  • Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

    Hi,
    I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
    I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
    So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
    Thks in advance for answers.

    I think i tried all the available ones, and there are many. Why can't we
    have a definitive automatic upgrade solution instead of having to do
    such a number of manipulations ?
    Le 14/03/2013 04:41, Flex harUI a écrit :
    >
          Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
    created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
    /Flex/ - View the full discussion
    <http://forums.adobe.com/message/5146932#5146932

  • Billing issues when trying to download an app

    Hey I'm having a lot of issues when trying to download any type of app all of a sudden is asking me to update my billing information and when  I enter it, is giving me the "invalid security (cvv) error" and im verifying all my info name, address, everything and is still not letting me save it and/or download any app...

    Hi CriselRivera
    as of now I don't the iTunes store accept the Debit card or a pre-payed card as a payment method, you will really have to find out another type of card  which should be a Credit Card.
    reference: http://support.apple.com/kb/HT2001
    go on the section "Accepted payment types"
    regards!

  • I am having the problem when trying to take a panorama picture.   It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i  hold the phone straight up and down, so that camera is at the top

    I am having the problem when trying to take a panorama picture. 
    It may only take the first frame or doesn't even start at all when I press the shutter button.
    even though when i  hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
    This problem is irritating me....?

    To take panorama
    - ensure that the panorama option is on
    - press the shutter button once
    - you will see a line with an arrow
    - move around in a circle  ( I keep the camera steady and turn myself around in a circle)
    - as you do this you will see the arrow moving across the screen as it captures pictures
    - at the end of the capture, you will be able to see your panorama picture
    I hope that this helps, do report back.

  • How can i solve the contact itunes support issue when trying to make in app purchases

    how can i solve the "please contact itunes support" issue when trying to make in app purchases? my account has available credit from a gift card

    Click here and request assistance.
    (69559)

  • My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

    My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

    Turn off Voice Control.
    Otherwise, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).

Maybe you are looking for

  • AME Taking Really Long Time To Open Encoding Settings

    With the release of the 2014 versions of AME, I have experienced really long wait times when opening the encoding settings for a job. For example, if I add a 1920x1080 image sequence to the encoder, pick Quicktime as the container and any of the avai

  • IE 11 and proxy setting

    Hi I have in IE 11 the following issues. I if use proxy settings my website layout it's not consistent If I don't use proxy setting my website layout works fine. This problems appears only in IE . If I change my browser to Firefox, Chrome or Opera my

  • Error in Configuring EP to MS SQL 2000

    Hi nw ep consultants           I have a requirment .. i have give employee number has a input nad i have press submit button.. it has to retrive the data from MS SQL 2000, so my backend is MS SQL 2000.. now i have to connect EP to backend system (MS

  • Is Viveza compatible with Aperture 3?

    I have recently moved my digital world to a slightly bigger and faster iMac and have been experiencing some problems with Viveza. I had previously been using Viveza (v2.0.0.4), with Leopard OSX 10.5.8 and Aperture 2.1.4 with some good results. Howeve

  • Importing classes to help applets - professionals

    I am creating a applet that calls a additional .class that acts as a gatewat between the applet and a servlet(applet -> class -> servlet) Inside the applet how I can make the 'import' statement for a file that is in the same directory of the applet??