I'm in Final Draft (screenwriting prgram) and hit Save as PDF and a window opens stating that the printer name is invalid - what am I doing wrong?

I'm in Final Draft (screenwriting prgram) and hit Save as PDF and a window opens stating that the printer name is invalid - what am I doing wrong?

Final Draft, Inc. - Search: printer name invalid

Similar Messages

  • I bought lightroom 5 and am trying to download via the serial number but it keeps saying the serial number is invalid what am I doing wrong?

    I own a mac and I downloaded an used the trial first and am now trying to down load using the serial number but it keeps saying it invalid.I have tried uninstalling and reinstalling and nothing is working. I have two photo shoots I desperately need to edit. please help.

    double check your serial number, Find your serial number quickly
    and Error "The serial number is not valid for this product" | Creative Suite

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I replaced my hard drive and then tried to reinstall adobe creative suite and it tells me that the serial number is invalid, what do i need to do?

    i replaced my hard drive and then tried to reinstall adobe creative suite and it tells me that the serial number is invalid, what do i need to do?

    You will need to contact Adobe directly:
    Contact Customer Care
    What version?

  • I plug in my iPad and make sure it is connected to the internet and locked.  I still get "This iPad hasn't been backed up in (N) Days"  What am I doing wrong?

    I plug in my iPad and make sure it is connected to the internet and locked.  I still get "This iPad hasn't been backed up in (N) Days"  What am I doing wrong?

    Is the iPad plugged in to the mains ? You can force a backup via Settings > iCloud > Storage & Backup > Back Up Now
    If the 'hasn't been backed up' message is stuck on the screen and you can't clear it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You can then force a backup as above.

  • My email on my mac (which has iCloud) is giving me a message that the server has rejected my password.  When I go onto the internet and sign into iCloud there, the password is accepted.  What am I doing wrong??

    My email on my mac (which has iCloud) is giving me a message that the server has rejected my password.  When I go onto the internet and sign into iCloud there, the password is accepted.  What am I doing wrong??

    Thanks...I just spent an hour on the phone with Apple Support sorting out the password issues for my various devices!!!  My password was compliant with the new rules, but there were some (mysterious) setting issues that required me to delete mail from my MacBookPro and add it back, again.  All in all, it was an hour of trouble-shooting which resulted in what, I hope, is a good fix.
    Thanks for your help...wishing you continued success in the support community.

  • I purchased a hdmi cable to watch movies and slide shows from my mac book pro to my sony bravia tv. i get picture through the tv but no sound. what am i doing wrong?

    I purchased a HDMI cable to watch movies and slide shows from my mac book pro to my Sony Bravia TV. I get picture through the TV but no sound. What am I doing wrong?

    Go to sounds in system pref and select outputs. When the hdmi cable is plug into the tv it will show as an option under output. Just select that option.

  • Ihave downloaded iCloud to my new PC and am using windows 7 and office 2010. I cannot get iCloud to come up on Outlook with the choices for CalendCar and contacrts, my iMail account is there, but not the general coud choices. What am I doing wrong.

    I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and contacts? What am I doing wrong?

    I have I cloud 2.0.2.187 loaded just downloaded yesterday.

  • I live in canada and am trying to sent a clendar to friends in the states but it won't let me change the country in the edit shipping address section   what am i doing wrong?

    i live in canada and am trying to sent a calendar to friends in the US   in the edit shipping address section it won't let me change the country.  what am i doing wrong?

    You can only ship Apple products to the same country as the credit card used is billed to. So unless you have a credit card with a billing address in the States you won't be able to ship direct.
    Happy Holidays

  • I am using CGI Vis examples in LV6.1, and the VI simply opens when I click on a link. What am I doing wrong?

    I am running Labview 6.1 and am simply trying to learn about the CGI VIs from the examples. I set up the Web Server root directory and I have the cgi-bin directory in it. When I view the provided index.htm file using http://localhost/index.htm, I see the web server document (so the server is working???). I go to the CGI examples and click on the link for CGI Basics. Everytime I click on the link, the vi tries to download with a prompt for SAVE or OPEN. If OPEN is selected the vi opens but does not run. I thought it might be a problem with the browser being on the same machine, so I went to a machine without Labview installed and it still tries to download th
    e vi locally from the server. I assumed from the documentation that the vi runs on the server and sends a request back in html form. I must have missing something or setup wrong. Any help would be deeply appreciated!
    Setup (In case it matters)
    Labview 6.1
    Internet Developers Toolset 5.0
    Windows XP Pro and Windows 2000 Pro (Tried both)
    Internet Explorer 6.0
    Happy New Year to all!!!

    I am not sure what the problem could be and I am a little confused about the exact steps you took. I launch LabVIEW, start the HTTP server, point my web browser to http://localhost/index.htm. This brings of a page entitled G Web server. I click on the button to "View CGI Examples" which redirects by browser to http://localhost/examples/index.htm . I click on CGI Basics and go to http://localhost/examples/basics.htm .
    This page has four groups of examples and within each group there are several examples. All of the examples I clicked on redirected my browser. Is this what you see?
    Was the message to save or open from the browser or from LabVIEW? If it was from LabVIEW, then you might consider mass compiling the VIs on your computer. You can do this
    by opening LabVIEW >> tools >> advanced >> mass compile.
    You might also try a reinstall of the Internet Toolkit. The examples may have been corrupted.
    Finally, LabVIEW 6.1 introduced remote front panels. You might find them easier to use than CGI scripting.

  • I am trying to burn a CD from a playlist in iTunes. I set everything up, and then when it tries to burn, it cancels the burn right away, and gives me the error code: 4251. What am I doing wrong?

    Okay, so I wanted to burn a CD to play on players in the house. The songs on my playlist are from CDs that I own and imported into my iTunes. Here are the steps I've taken:
    1. I created a playlist
    2. Selected File > Burn Playlist to Disc...
    3. My Burn Settings are as follows: Maximum Possible Speed (I have tried all the other speeds as well with the same result), Audio CD (No gaps between songs), Use Sound Check is selected, Include CD Text is selected (I have also tried unselecting these two options).
    4. Then I clicked Burn
    5. Within a couple of seconds "Cancelling Burn" shows up in the window at the top of the screen, and a box pops up that says: The attempt to burn a disc failed. An unknown error occurred (4251).
    I have tried different CDs, I have changed all the settings in the Burn Settings box, and I get the same result over and over again. I researched the error 4251, and it refers to a problem with importing songs from a CD. This is totally irrelevant since I'm not trying to import, I'm trying to burn. This is a blank CD, and it is a CD-R. These CDs are off a tower I purchased less than a month ago, and have had absolutely no problem burning other things to these CDs. I really don't want to have to re-import these songs to Windows Media Player or another application just so I can burn what I want onto a CD, but this is almost the point I am at.
    iTunes certainly isn't helping me much at this point, and I would appreciate any feedback into what I am possibly doing wrong in trying to create a CD.

    I have Windows 7 on a Dell.  Open and play iTunes in the compatability mode and use Windows XP (service pack 2).  Disregard any messsages to disable the compability mode.  This has worked for me.  I have also reinstalled iTunes and played with burn speeds etc.  These ideas did not work.  Compatability mode works.

  • Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

    Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
    Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
    Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
    Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
    My theories:
    - true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
    - The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
    QUESTIONS:
    - Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
    - I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
    Rule out:
    - wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
    Any help will be greatly appreciated.
    Thanks in advance!

    13 ASCII characters = 104 (aka 128)-bit WEP
    encryption
    If turning off WEP works, then you just need to
    provide the cameras with the "Equivalent Network Password".
    One of the problems with WEP is that the actual
    standard relies on a 10 character HEX key for 40bit
    WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier, vendors use certain
    algorithms to convert simple alphanumeric passwords
    (or passphrases) into HEX keys, thus enabling the use
    of simple easy to remember WEP password rather than
    lengthy HEX keys. The problem is that different
    vendors use different algorithms to generate the HEX
    key and therefore a ASCII password on an AEBS will be
    hashed differently on a non-Apple client and vice
    versa.
    You may find the following article helpful:
    - Apple article, especially the part about
    "Third-party client to Airport".
    Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
    I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
    Thanks again for your help and suggestions... I really appreciate it.
    geoff

  • How can I attach more than one file , whenever I attach more than one and I send it just sits there. If I send just one it goes thru , what am I doing wrong.

    I use 1and 1 webmail for e-mail and there isn't a way to addin my webmail acct. what should I do. in "mailto" in FF I selected "other" should I do that or check something else.

    How about performing the update IN the database using a stored
    procedure?
    By using non-database fields on your form to get the
    information, you can then call the procedure in the database to
    perform the updates. If an error occurs in the procedure you
    rollback, if necessary, and send a message or status back to the
    form. If it succeeds you might wish to commit and then re-
    execute the form's query -- using either the original key values
    or the new key values...
    null

  • I recently got a iPad camera connection kit hoping to directly download my photos from the memory card for my camera, a Sony Cybershot. When I put my memory card in the adapter and plug it in to the iPad nothing happens. What am I doing wrong?

    I recently purchased an iPad camera connection kit hoping to directly download pictures from my camera to my iPad. When I put my memory card into the adapter and plug it in to my iPad nothing happens.  My camera is a Sony Cybershot and the memory card is a Sony memory stick PRO duo 512 mb.  I don't think I am doing anything incorrect.  Is my camera/memory card incompatible with this adapter?

    The Camera Connection Kit works with SD cards, not Memory Sticks.
    Maybe you can find an MS to SD adapter, or use the USB connection with the USB cable that came with the camera.

  • When I open a new tab and type in a URL, a new window opens, rather than the link appearing in the tab. Also, when opening links embedded in pages, these always open in new windows rather than tabs. I want to use tabs!

    I was cleaning my keyboard, I wonder if some button got pushed that altered the settings. But when I look at firefox's settings, nothing is obvious.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for