I'm in need of a 90w power bloc for my 23" HD display

I'm in need of a 90w power bloc for my 23" HD display as mine is failing.
Anyone got an extra?
A1097
<Email Edited By Host>

John, please refrain from posting your personal email in these threads. It is not necesary and all communication to you can be done directly in these forums. Posting your email address can open up you to tons of unwanted spam, among other things. Really all you can do is search the internet for them. My suggestion would be to google "case for late 2007 macbook pro".
One will probably be very hard to find for a 6 year old model as it is on the borderline of being considered "vintage". Ebay may be a good place to try too.

Similar Messages

Need power schematics for a 20" cinema display a1038 (four pronged cord)

need power schematics for a 20" cinema display a1038
missing the power adapter for the cinema display,need to know what the leads are for the power cord.
There is a Edison power cord that plugs into a little square box, then a 4 pronged cord plugs into that box.
I have a 24 volt power supply with the same amps, and want to hook it up to the 4 pronged plug since I don't have the little power supply box. I don't know what each lead is.
The easy answer is to buy the power supply. I bought the cinema display cheap and want to see if its worth buying the little box power supply that costs around 70$ on e-bay. If it works with the 24 volt power supply Ill go ahead and buy the little box.

Hi
If the monitor is a clear acrylic model with three feet (which it seems to be), and your computer is an original AGP Graphics/Sawtooth model, you'll need a DVI to ADC adapter.
You can identify your exact computer model from the following link:
http://docs.info.apple.com/article.html?artnum=58418
The ADC connector, which the older 20" Cinema Display uses, wasn't introduced until the later Gigabit Ethernet models. Unfortunately a newer graphics card with an ADC port won't work either, as the Sawtooth lacks an extra connector on the logic board required to power the monitor through the ADC cable.
DVI to ADC adapters are fairly expensive as they include an integral power supply to drive the monitor. It may also be worth checking your graphics card supports the resolution of the 20" display (1680 by 1050). In the worst case you may need a new graphics card (with a DVI port) and the adapter.

I need to purchase a power cord for my intel based 27" iMac. I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

I need to purchase a power cord for my intel based 27" iMac. I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

iMacs take generic power cords. If it fits into the back of the iMac and an electrical socket, it'll work.
Good luck.
Dr. C.

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

Need there party power adapter for apple 23in cinema display

need therd party power adapter for apple 23in cinema display

All you need is an AC prong adapter and, if you can't find what you need on the web, you'll be able to find one in Russia for a small handful of rubles.

I need to purchase a power chord for imac

Help me purchase a new power chord for imac (2009)

How about Gmaj with diminished 7th?
Or did you mean cord?
You can get an IEC C13 (D-shaped socket) from any electrical or electronics retailer.
Loads on Amazon. I got mine from B&Q Spares (a UK hardware store).
Available in lengths up to around 3m.
If it's a G4 iMac you need the 'cloverleaf' aka 'mickey Mouse' socket IEC C5

I really need to find a power cord for photosmart a646.

I've been looking all over the internet with shady results. The HP product search is NOT helpful AT ALL!!!!!!!!!!!!! And I do not want to order something that looks good from China via Amazon but might not be the right product. Do you have any information about where I can find this power supply? It's an AC adapter 32V 844mA. Thank you very very much!!!!

Hi,
They are ALL "Made in China" anyway.
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need help interpreting Kernel Panic Log for MBP w/ Retina Display

So, I keep getting kernel panics on my new MBP w/ Retina Display. I'm not quite sure how to interpret the log, so I would appreciate your help . I just want to confirm that this is an issue w/ Google Chrome and not something else?
Interval Since Last Panic Report: 461718 sec
Panics Since Last Report:          2
Anonymous UUID:                    BA442D2B-0449-47CA-B3E4-8BD811A74854
Sat Aug 4 00:39:48 2012
panic(cpu 3 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f823e39b1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000084, CR3: 0x000000005657404e, CR4: 0x00000000001606e0
RAX: 0xffffff7f823e3a84, RBX: 0x0000000000000077, RCX: 0x000000000000007c, RDX: 0x0000000000b4aba7
RSP: 0xffffff80ea1f39b0, RBP: 0xffffff80ea1f39c0, RSI: 0xffffff8015e06600, RDI: 0xffffff80230c7000
R8: 0x0000000000000075, R9: 0xffffff7f8243d380, R10: 0xffffff80ea1f392c, R11: 0xffffff80ea1f3930
R12: 0xffffff8016c50988, R13: 0xffffff80230c7000, R14: 0xffffff80d3a10000, R15: 0xffffff80230c7000
RFL: 0x0000000000010282, RIP: 0xffffff7f823e39b1, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000084, Error code: 0x0000000000000002, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80ea1f3660 : 0xffffff8000220792
0xffffff80ea1f36e0 : 0xffffff80002c4794
0xffffff80ea1f3890 : 0xffffff80002da55d
0xffffff80ea1f38b0 : 0xffffff7f823e39b1
0xffffff80ea1f39c0 : 0xffffff7f823e7f7d
0xffffff80ea1f3b00 : 0xffffff7f823e4ed4
0xffffff80ea1f3b60 : 0xffffff800065593e
0xffffff80ea1f3b80 : 0xffffff800065621a
0xffffff80ea1f3be0 : 0xffffff80006569bb
0xffffff80ea1f3d20 : 0xffffff80002a3f08
0xffffff80ea1f3e20 : 0xffffff8000223096
0xffffff80ea1f3e50 : 0xffffff80002148a9
0xffffff80ea1f3eb0 : 0xffffff800021bbd8
0xffffff80ea1f3f10 : 0xffffff80002af140
0xffffff80ea1f3fb0 : 0xffffff80002dab5e
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD4000Graphics(7.2.8)[6B02D782-A79F-399C-81FD-353EBF F2AB81]@0xffffff7f823db000->0xffffff7f82441fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[C0404427-3360-36B4-B483-3C9F0C54A3CA]@0xffffff 7f80829000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[474FE7E9-5C79-3AA4-830F-262DF4B6B544]@0xff ffff7f8088d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[EF26EBCF-7CF9-3FC7-B9AD-6C0C27B89B2B]@0 xffffff7f80854000
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 11003994580324
last loaded kext at 7775308584: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f824ff000, size 28672)
last unloaded kext at 164467861147: com.apple.iokit.IOEthernetAVBController          1.0.1b1 (addr 0xffffff7f818e9000, size 20480)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.69
com.apple.driver.ApplePlatformEnabler          2.0.5d3
com.apple.driver.X86PlatformShim          5.0.0d8
com.apple.driver.AppleHDA          2.2.3f13
com.apple.driver.AppleMikeyDriver          2.2.3f13
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.GeForce          7.2.8
com.apple.iokit.IOBluetoothSerialManager          4.0.7f2
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.ApplePolicyControl          3.1.32
com.apple.driver.AppleMuxControl          3.1.32
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleIntelHD4000Graphics          7.2.8
com.apple.driver.AppleIntelFramebufferCapri          7.2.8
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.7f2
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.0.4
com.apple.driver.AirPort.Brcm4331          560.7.21
com.apple.driver.AppleSDXC          1.2.2
com.apple.driver.AppleUSBHub          5.0.8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleAHCIPort          2.3.0
com.apple.driver.AppleUSBEHCI          5.0.7
com.apple.driver.AppleUSBXHCI          1.0.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.3
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.DspFuncLib          2.2.3f13
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.2.3f13
com.apple.iokit.IOHDAFamily          2.2.3f13
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.1.32
com.apple.driver.X86PlatformPlugin          5.1.1d6
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.nvidia.nvGK100hal          7.2.8
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.NVDAResman          7.2.8
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.7f2
com.apple.iokit.IOBluetoothFamily          4.0.7f2
com.apple.driver.AppleThunderboltDPInAdapter          1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.0.7
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.0.8
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.5
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro10,1, BootROM MBP101.00EE.B00, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f28
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.198.19.21)
Bluetooth: Version 4.0.7f2, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 8

Before you do that, go here: >System Preferences>Energy Saver & remove the check for automatic graphics switching:
See if the panics stop.

90W Power Supply recognized as 65W Supply.

I got a new 90W Power Supply for my SL510. But from the PowerManager, as well while in the booting phase, it is recognized as a 65W Supply. ( I get while booting the message to use the shipped supply instead of this weaker one, in the PowerManager i get : "65W AC Adapter is attached")
Is there a way to tell my system that the supply is a 90W unit ? Is this new supply maybe already broken ? How does my computer tell which adapter is attached ?
I already updated to the latest Bios, but it did not do much.
Solved!
Go to Solution.

If you bought the adapter directly from Lenovo I would recommend you to contact your after sales department for further troubleshooting. It is possible they may need to send you a new one.
You should be able to find the after sales contact information from Lenovo's German shopping site under contact information. Here is the link to the the US site: http://shop.lenovo.com/us/landing_pages/contact/
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Need new power adapter for Qosmio F50

Hello
I am in need of buying new power adapter for my Qosmio F50 126. The reason being if I try to run more demanding application on my computer, the entire computer just crashes, shuts down. I need to buy a new adapter before my entire computers crashes result in destroying my HDD. I am not sure if my battery are died or the power adapter fails to charge them up.
The picture of underside of my power adapter is shown below.
https://www.dropbox.com/s/qcrk4fl5bhftbzm/IMG_20131220_215821_454.jpg
What I would like to know if the following two adapters are the same and would work with my model. I ask this because the price difference between the two units is significant., 20 USD. Also, I will be importing it from the USA using an agent here. Therefore I need to get it right on the first try.
I'm curious about the connecter it has on the end. I wonder if its same as the one which came with the notebook. I believe it wont be an issue with it clearly says it supports my model, Qosmio F50 126
Another find which I believe is the best and most compatiable.
This one will sure work but the price is much higher than the one mentioned above
Regards
Abdusamed
+Message was edited: link to onlineshops has been removed - advert+

Hi
You need an AC adaptor which supports *19V and 6.32A*
The Ampere value might be a little bit different. This should not be a big problem but you have to ensure the Ampere value isnt too low. The notebook needs enough power to run properly and to charge the battery.
However, the Volt value (19V) cannot be different. _It has to be *19V_*
The original AC adaptor has the part number: *PA3290E-3AC3*
I recommend you to purchase the AC adaptor recommended by Toshiba.

Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100

I am curretly running CS6 on my dell xps 9100
Windows 7 64bit
12GB Ram
2TB HD + 0 Rate 2TB External Drive (x2)
Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache.
Memory and Storage
The Studio XPS 9100 can be equipped with up to 24 gigabytes of RAM. It uses Tri-Channel DDR3 SDRAM operating at 1333 megahertz. The computer has six DIMMs into which RAM can be plugged. The Studio XPS 9100 may have a hard disk size of up to 2000 gigabytes using SATA drives operating at 7200 rpm.
Video
ATI Radeon HD5870 with 1024 megabytes of RAM
Expansion and Networking
The Studio XPS 9100 has one PCI slot, three PCIe x1 slots, one PCIe x8 slot and one PCIe X16 slot. It has four USB 2.0 ports, a 15-in-1 card reader, a headphone port and a microphone port on the front panel. The rear ports into an IEEE 1394a port, surround-sound audio ports, four USB 2.0 ports, one eSATA port, an S/PDIF port and HDMI ports. It has integrated 10/100/1000 Gigabit LAN through the RJ45 port on the back with optional internal Wireless-N. PCI card slot (PCI_1) 26
PCI Express x1 card slot (PCIE1X3)
PCI Express x16 card slot (PCIE16_1)
PCI Express x1 card slot (PCIE1X2)
PCI Express x1 card slot (PCIE1X1)
PCI Express x8 card slot (PCIE8_2)
Chassis and Power
The Studio XPS 9100 is 19.4 inches high by 7.8 inches wide by 20.7 inches deep. It weighs about 40 pounds. A 525-watt power supply powers the computer.
I use Audition, Premiere Pro and After Effects (Dynamic Link) to edit concerts filmed on 4 HD Camera's (m2ts x3 and mp4) I also take and mix 6-8 tracks from soundboard and mix in audition. I find my system is struggling to keep up when I have done some color correction and then try to cut in multi-cam mode. My graphics card does not support CUDA and as stated above my system only has a 525w power supply. So a GeForce GTX 470, 570, 580 would not be compatable. I do not GAME but I work with large HD files (4 angles, 1-2 hours each, audio & effects).
My trouble is I don't know which one of the graffics cards that support Mercury play back, would be the best for my needs without having to upgrade my power source (if possable). I'm thinking a mid level card and another 8-12 ram upgrade would be more suited (and cheaper) to my needs, unless I'm going to need a power upgrade anyway. If someone could please let me know what card would help me with my worload of these that would be great! I guess what Im saying is can someone tell me which of these is compatable with my system and is it worth it for the change in performance I will see?
GeForce GTX 285 (Windows and Mac OS)
GeForce GTX 470 (Windows)
GeForce GTX 570 (Windows)
GeForce GTX 580 (Windows)
NVIDIA® Tesla C2075 card (Windows) when paired with a Quadro card as part of an NVIDIA Maximus™ configuration
Quadro FX 3700M (Windows)
Quadro FX 3800 (Windows)
Quadro FX 3800M (Windows)
Quadro FX 4800 (Windows and Mac OS)
Quadro FX 5800 (Windows)
Quadro 2000 (Windows)
Quadro 2000D (Windows)
Quadro 2000M (Windows)
Quadro 3000M (Windows)
Quadro 4000 (Windows and Mac OS)
Quadro 4000M (Windows)
Quadro 5000 (Windows)
Quadro 5000M (Windows)
Quadro 5010M (Windows)
Quadro 6000 (Windows)
Quadro CX (Windows)
Tesla C2075** (Windows)

Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference

Where do I get the AC to DC Power Adapter for a Linksys "Compact USB 4-Port Hub [USBHUB4C]

I have two Compact USB 4-Port Hubs, Model Number USBHUB4C. These Hubs can be powered, but I cannot find any information on External Power Adapters for these Hubs in any of the documentation or on the Linksys Web Site.
I need to know if Linksys has such Power Adapters available, and if so what the Model Numbers are, and how or where to purchase them.
If I will need a third party Power Adapter, I need to know what the Output Voltage & Current requirements are, and I also need to know the Polarity of the of the two Jack Contacts. [i.e. Is the center pin on the Hub's Jack Positive or Negative?] If possible I'd like to have a recommended Brand and Model Number for the Power Adapter.
Thanks In Advance,
Bruce

Friday, August 28, 2009, 0302 PDT
Hi, again,
Boy, am I glad I was able to find an answer to my problem in here. I find this very interesting. Here it is, almost 3 years after I made the original post, that I need to find the Power information, for this Device, again, but because of a Computer Crash, I could not get to the original notes, I made about this Forum Entry, so I began the search, again.
I find this very interesting. Here it is, almost 3 years after I made the original post, that I need to find the Power information, for this Device, again, but because of a Computer Crash, I could not get to the original notes, I made about this Forum Entry, so I began the search, again.
I have myriad AC/DC Converters, some of which are Voltage Selectable, but since the Power Specifications aren't on the HUB, or in the PDF Documentation, as is the case with most other Products, I came back to LinkSys/Cisco. As soon as I entered the Model Number of the "Compact USB 4-Port HUBs, Model Number USBHUB4C," for a search, this Forum entry came up on the page, and it appears there haven't been any queries, on any other subject, about this Device, in the interim.
Since the entry has been Viewed 2,484 times, hasn't it dawned on someone that it might be a good idea to carry a Power Product, that is compatible with this HUB, or at least provide a Specific Source, with a Model Number, (for instance, a Radio Shack SKU) so we don't need to hunt for one, over, and over. Why the information was never included in the package with the HUB, beats me. (It should have been on the Device, itself.)
Anyone who knows anything about USB Devices, knows that many of them cannot be powered from the USB Ports on a Computer, especially, on Laptops. Since one of the things mentioned in the Specifications is the fact that you can have "Max. Devices 127 (Daisy-chaining Hubs Together)," it would seem to be obvious that Power Information would be necessary. Since the "Daisy Chain" number is true, it should be obvious, that the "Chain" would require quite a few AC/DC Adapters to power it, adequately.
When this Device was Designed, the requirement for External Power must have been known, or there would never have been a Power Connector built into the Device. I've been in electronics for about 50 years, now, and I know that presently, it's a rarity that the Power Requirements aren't shown on the Device itself, with a Symbol depicting the Polarity of both the Inner, and Outer Conductors. Even Toys have that information shown on them.
I love these HUBs, but LinkSys/Cisco has really dropped the ball on this one. I'm guessing that a lot of people have discovered, that if this 4-Port USB HUB doesn't have External Power, they quickly decided not purchase another one, when they need to "Daisy Chain" them together, for their Network of USB Devices.
When you consider the loss of HUB Sales, coupled with a loss of income from a Power Supply they've never stocked, the numbers could be quite large. That's not even considering the Support time I'm guessing would have been necessary when Customers determined they had a problem, and needed answers. (It's not really a guess, since I talked to several Support People, without getting a satisfactory answer, before I finally came to this Forum, as a last resort.)
I was actually shocked to find that LinkSys/Cisco, didn't sell an AC/DC Power Supply for the HUB, because Power Supplies like that are so commonly required, with the Electronics sold, today. I'd be willing to wager that LinkSys/Cisco does, in fact, carry an AC/DC Power Supply that would be compatible with the "Compact USB 4-Port HUBs, Model Number USBHUB4C," they sell. When something like this happens, I wonder how many other Opportunities like this, have been missed by the people who work for this company.
We've all heard the expression about "Being too close to the Forest, to see the Trees." This may be a good example of it's meaning. At least I was able to find the answer to my Problem, thanks to the fact that the Query I made almost, 3 years ago, which had an answer, was still available to me, thanks to this Forum.
Very Interesting!
Bruce Feezel
Comedian62

Replacement power supply for Airport N base station?

I'm in need of a replacement power supply for an Airport Extreme N base station.
Is this something I can pick up at a friendly neighborhood Radio Shack, or do I need to order the OEM part from Apple?
I don't need the automatic international voltage switching, just something that can power this puppy with US AC. Thanks.

Tom welcome to the discussions.
I would probably call the Apple number.
1-800-MY APPLE
I am sure that they can point you in the right direction.
I am a little shocked that one of the Apple Retail stores can't offer you a Power Supply.
If all else fails, it sounds like you have tried an alternitve, if it works use it, until you can get a replacment.
Don

Power Cord for iMac

I'm in need of a new power cable for a 20" white iMac, Intel Core 2. I don't know what or where to look for it. Can someone please help me get my mac back on the road?

Welcome to the Apple Discussions!
You should be able to get one through the Apple Online Store for the UK or an Apple Store. 3rd party Apple venders may be able to help, but they may need to order it.
If the ones in the UK are similar as here in the Americas (I know that the plug for the wall is different) it is a standard cable used by many computer devices and they are interchangeable. The one from Apple just has the decorative ring that pops in the back of the Mac.

IMac power cable for Europe?

Hi,
I have just moved from the USA to France and need to get a power cable for my Imac. The apple store in Montpellier was not helpful. Can anyone PLEASE tell me where or how I can get one? Thanks!

Hi, the OSU is auto switchibg, an adapter will wirk...
http://www.alibaba.com/showroom/ac-adapters-france.html
They also have off the shelf cords many places that'll work.

I'm in need of a 90w power bloc for my 23" HD display

Similar Messages

Maybe you are looking for