I'm in the military. Is Mac compatible with Lotus Forms viewer, Silanis ApproveIT and Activeclient for CAC?

I'm in the military and I'm thinking about buying a Mac. I will need to install a CAC reader, Lotus Forms viewer, Silanis ApproveIT and ActiveClient. Can this be done and is it relatively painless to do?

IBM made some software to view those forms on a Mac, but I don't know if it still exists. It was quite flakey, also. edit: Sounds like from militarycac.com that it no longer exists.
See MilitaryCAC.com, specifically the Lion page, for info on using a CAC with the MAC. You need to purchase a compatible card reader, which they discuss there.
It seems the easiest method is to use Thursby's PKard for Mac ($30 at www.thursby.com), but there are free alternatives. ActiveClient is not used at all. It is Windows only.

Similar Messages

Is the Sony HDR-SR11 compatible with Mac OS 10.5.6?

Is the Sony HDR-SR11 compatible with Mac OS 10.5.6? Thanks in advance for you thoughts.

Oops. wrong link. Check this one out
http://support.apple.com/kb/HT2948

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

I've got a payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer styl

i've got a vodsaphone payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer style that works In smart phones? if so, how do i go about getting the right card.

Contact your carrier & get a new sim...they should give you one for free.

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

I download Firefox 4 which is supposed to be compatible with OSX10.4 and above. But when I click the icon I get a message that it is not compatible with version of OSX10.4.11 and it wont load

I download Firefox 4.o and drag to app folder then to dock. When I double click on the dock icon I get a message the forefox is not compatible with this version of OSX (which is OSX10.4.11). What gives?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?

Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2

CS5: Could not complete your request because the file is not compatible with this version of Photosh

After several hours creating a PSD file in Photoshop CS5 I attempted to revert some changes and got this error "Could not complete your request because the file is not compatible with this version of Photoshop".
I closed the file and restarted Photoshop and still get this error.
I restarted the computer and still get this error. Now my hours of work are WASTED!
This file was created using Photoshop CS5 Extended and was never in any other software.
Details:
Mac Photoshop CS5 (12.0 running in 32 bit mode)
File had a video layer (h.264)
MaxBook Pro 2.8Ghz
OSX 10.6.3

I was able to open the file in Photoshop CS2 and all layers were intact. PS CS2 gave me the message: "A layer is corrupt and will be discarded." Turns out that was the video layer. The file itself was fine and I am again working on it in PS CS5.
Which leads me to ask: If a video layer gets corrupted why can't PS CS5 open it?
PS CS2 had no problem opening the file, it just flatteded the video layer - it even kept the current key frame.
Additional info: Just before the file went bad I made a level adjustment to the video layer and set a keyframe in the animation panel. Then I saved and got the error "Could not complete your request because the file is not compatible with this version of Photosh' in Photoshop Macintosh". Also the source H.264 video file appears to be fine, it's only a 5 second clip and it play fine in every app - even PS CS5.

Could not complete your request because the file is not compatible with this version of Photosho

I just tried to open a file that I had saved last night and I got the message:
"Could not complete your request because the file is not compatible with this version of Photoshop."
Normally I would just chalk it up to a corrupt file and redo the project but I've had this happen to me 5 or 6 times in the past two weeks. I dont know what to do!
Things I've tried that haven't work:
Opening in ImageReady and Gimp, changing file extention to .tiff, dropping into photoshop as smart object, opening in Illustrator, re-installing photoshop, deleting old actions/plug-ins that might glitch up the system.
I just started a new job and I'm working on a 2.5GHz Mac Mini (OSX ver. 10.7.4) with Photoshop CS6 (16-bit).
I am NOT saving over a server or anything like that.
I did NOT close photoshop too quickly last night.
I do NOT have any Nortan Anti-virus anything.
I've spend hours reading up on this and every fix that I've found doesn't work.
I've been using photoshop for YEARS and I've NEVER had this problem before.
Please HELP!

There is a problem with the latest update, Mac, and saving a PSD file. Apparently it may not open in CS6, but will open in other versions. They are working on patch.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
more info:
Photoshop never crashed or anything.
I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
The file size was appox. 1giga
Thanks a lot

The problem was saving over the network. Working across a network is not supported.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

E-mailed File "The project is not compatible with the current version of Premiere Elements"

I have Version 12 on a PC.
My friend has Version 12 on a MAC.
E-mailed him a file.
He could not open, and a message box popped up: "The project is not compatible with the current version of Premiere Elements".
Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
Thank you,
Ben
[email protected]

Ben
As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
Details
Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
That is a rough sketch of the situation. I can fine tune the details further if necessary.
Please review and consider.
Thanks.
ATR

My Mac has Operative System MAC OS X Version 10.6.8,processor 2x2.66Ghz Dual core Intel Xeon. Is this compatible with Photoshop 5.5 or 5 and how can I get it in Bogotá, Colombia or can I download it ?

My Mac has Operative System MAC OS X Version 10.6.8,processor 2x2.66Ghz Dual core Intel Xeon. Is this compatible with Photoshop 5.5 or 5 and how can I get it in Bogotá, Colombia or can I download it ?

CS5 and CS5.5 are no longer sold. You can either buy CS6 or the subscription to CC. System requirements | Photoshop
Benjamin

Are IntelliPoint Pro 6.1 for MAC and IntelliType Pro 6.1 for MAC compatible with Mac OS 10.6?

Are Microsoft IntelliPoint Pro 6.1 for Mac and IntelliType Pro 6.1 for Mac compatible with Mac OS 10.6.7?

These arent compatible with Mac OS 10.6.7.
I only found some drivers for Mac OS 10.2 to 10.4 on the official Microsoft site.
EDIT: http://www.microsoft.com/downloads/en/details.aspx?familyid=410342E1-B3BD-44EB-B D0A-8BB18A9F25DA&displaylang=en#SystemRequirements

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

I'm in the military. Is Mac compatible with Lotus Forms viewer, Silanis ApproveIT and Activeclient for CAC?

Similar Messages

Maybe you are looking for