I'm in the process of installing ios 7.1 update in my 5s and it took too long. Can i stop its installation? Great thanks.
Hello everyone! I'm in the process of installing ios 7.1 update in my 5s and it took too long. Can i stop its installation? Can't open my phone.. what shoudl I do? to Great thanks.
Help pls... thank you.
Similar Messages
-
Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?
This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU -
Cant install iOS 5.1 update on my ipod touch 4gen. The message is: "Unable to install update. An error occurred installing iOS 5.1". Please help...
Wifi or USB update? Have you tried the other?
Have you tried reseting the iPod? Notihng is lost?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
Hi,
I am in the process of installing Maverick on my Mac Mini. I got an error: "Filesystem verify or Repair failed".
Most threads suggest that I either:
1. restart process,
2. install disk and try again,
3. recover disk
Since I am in the middle of installing, I cannot seem to go back to my working OS to restart the process. Since Maverick is available in the App Store, i cannot use a disk for it. That leaves me with recovering the disk. Can anyone suggest how I can do this without destroying all my files on the computer?
Thanks,Thanks for your advice.
I do have a backup, but I can't access it right now. I tried the OS X Recovery, but when I try the "Command-R" option, it just goes right back into the install. I have used the "Command-R" option before, so I know when and how long to hold it for. I just couldn't get it to not enter the install. I did manage to at one point get a prompt where it asked me if I wanted to install from Macintosh HD (main partition) or Backup (secondary partition), but I chose Macintosh HD, and it went back into the install. I couldn't get that option again for whatever reason.
Is there a way I can just start from scratch? Both Snow Leopard and Mavericks are online only. Is there a way to pause the install, connect to the internet and install a brand new (wipe out all files - I can always use by backup to restore my important files later) copy of the OS?
Thanks, -
Yesterday evening i installed ios 7.2 on my iphone 4 and since then my iphone's screen is stuck on the itunes n a battery recharge sign under it. what should i do?
That's not a battery recharge sign. It's telling you your phone is in recovery mode and you need to plug it into your computer running iTunes.
-
I have a problem in the process of installing iTunes
Hello
I have a problem in the process of installing iTunes and stops in the middle and show me this message
http://dl.dropbox.com/u/22061660/sads.jpg
Do any of you has a solutionFrom last picture looks like your user is administrator and it should have administation privileges.
But picture with error message says you doesn't.
The things I would do:
1. Reboot or Log out and log in
2. Try to change location where iTunes will be installed (ex. C:/iTunes)
3. Try to create test user also with admin priviledges and then try to install on another accaunt.
That's my thoughts for now...
Regards,
Mirek -
I upgraded to iphone 4s and installed iOS 6 but now my battery life is significantly reduced. What can I do to fix this problem?
I restored my settings my I got the new phone but I think I heard that with the iOS 6 updated that can be an issue and it is better to start from scratch rather than restore your settings.reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde -
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update
Dears at Apple:
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
Many Thanks!OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!
-
Installed iOS 7.04 in my iPhone 5 and back camera and flashlight still inop. Any others out there with this problem still and any ideal of when there will be a fix for it?
I'm using iOS 7.04 on my iPhone and basically can't use it. The screen is going crazy. I type and special characters show up. I have to hit send more than once (it grays out, then hit again) then it sends. I type words in text or email and it backspaces and deletes my entire message. I tap an application and it starts wiggling to delete. I've reboot several times. I'm looking at restoring, but that is a pain in the arse (it's my work phone). I'm nervous it will not restore properly.
I have iOS 7.03 on iPad and have no issues. -
My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks
If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.
It's a 64G ipod touch and was fine till Apple told me to upgrade to ios 6. Now most of my apps crash, my music won't play and I just get a white screen when I hit Music.
When I try to sync to itunes it acts like it's going to sync and appears to recognize the ipod, but it's grayed out and has an update circle by it that spins for a while until itunes eventually freezes alltogether. Is there a way to go back to ios 5 after a erase and reset?iOS: Unable to update or restore
-
???????????????/in the process of trying to purchase an app, it pops up and says please contact itunes to complete this tranaction
You probably need to contact iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.
-
I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?
adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore -
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?
My first advice is "Back up the device, then have it replaced." Second item of advice, "Don't forget your passcode."
One of the purposes of the lock button is to recover from certain software failures. Without the lock button, such a recovery is nearly impossible. My advice would have served you best when the malfuction first developed, not after you forgot your passcode.
Maybe you are looking for
-
Is there a way to view psd thumbnails in Windows 8?
Is there a way to view psd thumbnails in Windows 8 without downloading third-party software?
-
I have a dataset for a report - by default the report shows "all" by using "NULL" as the value in the procedure. Snippet from SPROC Where.... ISNULL(r.USER, 'Unknown') = @USER OR @USER IS NULL) In the RowGroups where I would like to have my report on
-
How to make an NTSC DVD from Pal & NTSC videos using CS3
Hi! I am on CS3, on Windows. I need to create an NTSC widescreen DVD from footage that is both NTSC and PAL. Also some of the footage is 4:3 and some 16:9. What would be the best way to accomplish this. I created an NTSC widescreen project in Premier
-
Pdf files in email won't open in ibooks ios7 upgrade issue
Since upgrading to ios7, I can no longer open pdf received in email to ibooks.
-
Hi, I'm trying to teach myself Swing by a Book called "JAVA, HOW TO PROGRAM" I have a class called "ButtonTest.java" Here it is: import javax.swing.*; import java.awt.*; import java.awt.event.*; * @author chris public class ButtonTest extends JFrame{