I'm installing the newest itunes 64 bit on my win 7 64 bit professional os. using the itunes installer it loads itunes part way and then i get an error message saying that bonjour service failed to start. i cant get itunes any further. i have to back out

I'm installing the newest version of Itunes over the last version on my laptop. win 7 pro os. it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services. I can't retry, ignore only cancel which un-installs all that it has installed and reverts me to the last version which i had. any idea?

it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services.
Sometimes we can get past that one by disabling the Bonjour Service prior to the install.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

Installing itunes to my laptop I get an error message Apple mobile device service fail to start verify that you have sufficient privilegesto start system services

Installing itunes to my laptop I get an error message (Apple mobile device service fail to start verify that you have sufficient privileges to tart system services)

You seem to have installED iTunes and are trying to connect your iDevice, is that right?
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Your statement - "installING" - also might indicate that you have insufficient privileges in Windows to properly install & use iTunes.
If you can't install or update iTunes for Windows - Apple Support
ÇÇÇ

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

When I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and wont be installed. I use Windows 7.

Everytime I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and can't be installed? I have tried to install it two times and get the same message each time. Any solutions to my problem?? Those who have installed ITUNES 11 is it hard to work with? maybe im lucky it wont update?? I don't know.

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

When I access the itunes store I get an error message saying that Itunes has detected a problem and has to be closed

When I access the itunes store I get an error message saying that Itunes has detected a problem and has to be closed. The rest of Itunes is working fine... Any help?

There could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Have never been able to backup iTouch in iTunes sync. Error message says that a session cannot be started. Have tried manual backup - same message. Thanks for any advice!

Have never been able to backup iTouch in iTunes sync. Error message says that a session cannot be started. Have tried manual backup - same message. Thanks for any advice!

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer

I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer. This usually works fine, so I don't know what I did to keep it form working.

Are you using Windows? This tells you how to restart the AMDS for Windows.
http://support.apple.com/kb/ts1567

Connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution

connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution

No it's not true. It's one big practical joke being played on you by Apple.

HT201210 I get an error message saying that my firmware is not compatible with the update. How do I resolve this?

I am trying to download and install the newest OS update for my iPhone4. The install fails and I get an error message saying that my firmware is incompatible. What do I do to resolve this?

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

I'm installing the newest itunes 64 bit on my win 7 64 bit professional os. using the itunes installer it loads itunes part way and then i get an error message saying that bonjour service failed to start. i cant get itunes any further. i have to back out

Similar Messages

Maybe you are looking for