I'm looking for a NI driver for a waters 717 plus autosampler. Either Labview 5 or 6. My system is a Pentium base with win98 installed.

Thanks
JP

Thanks. I kinda thought this would be case since I couldn't find the driver on the NI website. Phoning the manufacturer(Waters) could be interesting since they have their own instrument and hardware controllers (mellinium)and probably don't support NI interfaces. Thanks for your help.
JP

Similar Messages

  • I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8.  I would like to buy a new computer in the near future so would need it to be work on my next computer also.  Any suggestion

    I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8.  I would like to buy a new computer in the near future so would need it to be work on my next computer also.  Any suggestions?
    MacBook, Mac OS X (10.6.8)

    I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8.  I would like to buy a new computer in the near future so would need it to be work on my next computer also.  Any suggestions?
    MacBook, Mac OS X (10.6.8)

  • Looking for OfficeJet 8600 pro plus replacement paper trays

    Where can I purchase replacement paper trays for the OfficeJet 8600 Pro Plus printer?
    I am NOT looking for the add-on paper tray unit, but a replacement for the primary tray. We shuffle various types of paper and envelopes in and out of the tray throughout the day, and we would instead like to keep several extra trays loaded with specialty paper to reduce wear on the primary tray.
    Suggestiosn?
    Thanks!
    This question was solved.
    View Solution.

    I searched in the online stores available by HP and was unable to find this part.  However, I was able to find that the part is available through HP Tech Support by calling in.
    Click here to access the full list of HP Tech Support contact numbers.   
    The part number is CM749-60036 for the main tray assembly for the Officejet Pro 8600 Plus.  This part is, currently, around $25 usd, but prices are subject to change.
    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Looking for VCDIFF (RFC 3284) algorithm implemented in LabVIEW

    Hello forum,
    I am looking to see if anyone knows of a publicly available implementation of the VCDIFF binary differencing algorithm in native LabVIEW (G) ? 
    Here is a link to a paper on the RFC 3284 standard for those interested: http://tools.ietf.org/html/rfc3284
    There are a number of open source implementations in C/C++, but I would like to locate one in LabVIEW if possible.
    Regards!

    Implementing binary algorithmes in LabVIEW and especially compression algorithmes, while possibe is not a very smart idea. Aside from possible perfomance problems when you start to shuffle around on bit level, there is also the issue about how to proof the correctness of your implementation. Those open source C/C++ solutions have been used, peer reviewed and what else many times and all that has uncovered various flaws and bugs during the process.There is only a very small adience that will go and use your LabVIEW algorithme and even a much smaller one who is able to do any significant form of peer review.
    So all in all you are likely to end up with a somewhat to almost working implementation that nobody is going to use, for the gain of bragging that you did it in LabVIEW.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Looking for an Airplay Printer plus Scanner

    Hi,
    do you have any infos about an airplay printer plus scanner.
    Have HP or Canon this option for airplay printing.
    Thank you very much for any infos.
    You welcome

    The technology is called AirPrint and only HP offer AIOs with this feature.
    http://h30495.www3.hp.com/news/65/apples-airprint-announcement-benefits-hp-e-all -one

  • Having trouble seeing all pix, when looking for something on ebay.

    When looking for an item on ebay, some of the pictures are blank. 
    when I open an item with a blank pix, the picture is there.

    What model laptop do you have?
    Have you tried using a different USB port?
    If you have a USB flash drive or external hard drive, does that work when connected to the same port?
    - Peter

  • Looking for assistance in developing a magazine with 117 pages - iPad App with Adobe digital Publishing suite for the iStore

    We are looking for some help in developing and App, so that we can publish our current hard-copy magazine with 117 pages onto the iStore any suggestions?

    as bob said, it depends what kind of assistance.
    which language is needed, are you able to spend money on it, when is the deadline.
    do you need technic support, design help? do you have a license for dps, which one?
    ect.
    if you need a professional, experienced team our company could help you. but we will not work for free

  • Hi my name is steve arsenault  i am looking for a short keys for  apple and if someone has one i like to know how to use it please e-mail me has soon has posible thank you

    hi my name is steve arsenaulti am looking for a short keys for  apple and if someone has one i like to know how to use it please e-mail me has soon has posible thank you
    <E-mail Edited by Host>

    It sounds like you are looking for a program like Typinator.
    It isn't free, and the site doesn't specify compatibility with any OS above 10.7.
    As of today, the latest release is dated May 29th, 2012.

  • I updated to Mavericks and a bunch of my info deleted.  I tried opening a previous iDVD I made, but when I click on it, it says to look for themes.  How do I get my movie to work?  Thanks.

    I updated to Mavericks and a bunch of my info deleted.  I tried opening a previous iDVD I made, but when I click on it, it says to look for themes.  How do I get my movie to work?  Thanks.

    Did you do an erase and install of Mavericks?  If not look in the HD/Library/Application Support folder for an iDVD folder.  There should be a Themes folder in it. If it's not there look in your Home/Library/Applications Suport folder for the iDVD folder.
    NOTE: In Mavericks, 10.9,  the Home Library is invisible so go to your Home folder and use the View ➙ Show View Options menu to bring up this window:
    Select Show Library Folder.  Now you can check to see if the iDVD folder in there.
    If you find the iDVD folder launch iDVD, go to its Advanced preference pane and point iDVD to the Themes folder:
    If you can't find the Themes folder you'll need to reinstall iDVD from the source you installed it from originally, i.e. the disks that came with your Mac or an iLife 09 or 11 disk.
    OT

  • Looking for Freelance/ Part Time LabVIEW opportunities in Midlands UK

    Hi All,
    Along my full time Mon - Fri job as Automation Software Engineer (Siemens TIA Portal, step7 simatic manager, WinCC Flex, s7-graph, Proagent and NI LabVIEW),
    I am looking for additional freelance/ contract opportunities in writing LabVIEW code for machine control and product testing purposes. I am not limited to coding, I can happily specify and install DAQ systems/PLC systems, sensors, do panel wiring, etc
    I am LabVIEW trained Controls Engineer with 3yrs experience; also beeing lucky to have completed over 9 different courses to date in NI Training Centre, Newbury. However CLD or CLAD is not something what I have acquired yet.
    Target audience includes machine builders and integrators requiring LabVIEW application written for their equipment. My work examples can be provided upon request which covers Test programs written in automotive industry for Digital and Analog IO control, LVDTs measurements, RS232 coms, Barcode Scanners, Printers, etc,
    I do have my own LTD with public liability covered, so no issues here.
    Best Regards
    Tom
    Warwickshire

    我们现有一项目需聘兼職LabVIEW工程師， 有意请电邮：[email protected]

  • Mac server hangs every few days. where to look for cause?

    I have a Mac server that hangs every few days and requires a hard reboot.
    It is run headless so we have no screen feed back of what is happening when it hangs.
    It is possible that just the network communications fail. But it is in software because a reboot restores the situation everytime.
    I could use some advice on where to look for possible causes: which logs, or dumps that are produced by the system.
    Thanks

    These instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Looking for BAPI which can post condition records.

    Hi ,
    I am looking for a bapi which can post the condition records. I need to post Maximum Condition Base Value KONP-MXKBAS along with other fields. I found already one bapi BAPI_PRICES_CONDITIONS which has this field but if I execute
    the bapi with BAPI_TRANSACTION_COMMIT it is not posting any data at all. So could any one please help me out of this or if any other alternate BAPI* or any other solution is possible here. But one thing to mention here that LSMW,BDC is not possible to use.
    Thanks in advance.
    Best Regs
    Somnath

    Hi!
    In most common, standard BAPIs are working correctly.
    Here are a the following cases if they aren't:
    - standard fault, mostly has a correction note at OSS (very rare case)
    - the BAPI is not finishing succesfully. In this case, you always have to check the return table of the BAPI (BAPIRET2, or RETURN, etc...). In this table there is the error. Mostly it occurs due to incorrect customizing settings.
    Please check the return table of your BAPI, and you'll find out the problem.
    Regards
    Tamá

  • I just bought iPhone 5c. Looking for LifeProof case. Does Nuud will protect my screen from scratches and shatter? Or should I go with Fre?

    I just bought iPhone 5c. Looking for LifeProof case. Will Nuud protect screen from scratches and shatter? Or should I go with Fre?
    Thank you for suggestions.

    Have a look at this comparison from the manufacturer.
    http://www.lifeproof.com/blog/2013/10/nuud-or-fre-lifestyle/

  • Looking for Classic Mac OS QuickTime 6.0.2 Full Install

    Hello:
    I would like to finally resolve a problem I've had for several years. When I upgraded to QuickTime 6.0.3 a couple of .avi files which played fine with QuickTime 6.0.2 do not work correctly. About 30 seconds into the clips, the video stops. Audio continues fine. I am also unable to convert the files to another format because of a "compression error." Since I know these files worked when I had QT 6.0.2 I would like to downgrade so I can convert the files.
    I've looked for a long time, but have been unable to find the Classic Mac OS QT 6.0.2 Full Install file anywhere. Does someone have this? Of course this would be the one file that I do not have a backup.
    TIA!

    The name of the Apple downloads file for QT 6.0.2 was probably something very close to this:
    QuickTime602_Installer.smi.bin
    Have you tried searching among those old legacy file downloads on the Apple downloads? I know they are sometimes hard to find and reasonable searches using the Apple search often gets one no where. You might try googling for the old quicktime and get into the Apple downloads through the "back door" so to speak.

  • [SOLVED] Looking for an audio player; specific requirements

    I've searched around and can't really find what I'm looking for in an audio player(though Audacious and Exaile come close). What I need is one with these aspects:
    - Based on GTK+
    - Relatively lightweight
    - Skinnable
    I'd like something with a look similar to the Winamp "modern" skins, rather than the classic ones, but I can't find anything like this for Linux.
    Last edited by Ronin-Sage (2009-01-14 07:28:10)

    droog wrote:
    Ronin-Sage wrote:I'd like something with a look similar to the Winamp "modern" skins, rather than the classic ones
    This makes your request impossible.
    Nothing's impossible... creativity is key. I you can't achieve the look you're looking for natively, either code something yourself or look into running winamp through wine (here's an article on running winamp through wine if you're feeling lazy).

Maybe you are looking for