I'm looking into the possibility of using Photoshop CS2 on Imac with Mavericks OS. Is this even possible, and if not, what would I need to do?

Is it possible to download and use Photoshop CS2 on Imac with Mavericks OS?

This is not a photography question. It is an application specific question, Please post in the Photoshop forum.
Photoshop General Discussion
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

Similar Messages

I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?

I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?

Thanks, I was thinking so. I installed my CS4 from a CD in 2008, and it looks like Adobe has taken another approach to selling their products. I'll be downloading CC Photoshop a little later today.
cw
From: Brucgovn <[email protected]>
To: Chris Warot <[email protected]>
Sent: Saturday, May 2, 2015 11:27 AM
Subject: I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
created by Brucgovn in Adobe Creative Cloud - View the full discussionYes, you will get full version Photoshop cc 2014 as well as Lightroom CC 2015 with Photography plan If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505683#7505683 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505683#7505683 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't remember the password I used to set up icloud nor the email I used to set it up with. I have my apple ID and email for that account.

I recently had to do a factory restore on my iphone 4s. Upon trying to set up my phone again I am being asked to sign into my icloud account. I can't remember the password or the email I used to set it up. I know my Apple ID, password and email for that account, but that doesn't allow me to get back into my phone. I can't reset the icloud password because I can't remember the email I used. Any ideas on what I can do please ?

Hi, Fugalltadowivu.
Thank you for visiting Apple Support Communities.
This sounds like Activation Lock has been enabled on this device. Here is some helpful information regarding this feature.
Find My iPhone Activation Lock
http://support.apple.com/en-us/HT201365
If you purchased your device from a third party, this device may be locked to their Apple ID. If this is the case you may want to check out the article below.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/en-us/HT201441
Cheers,
Jason H.

Using MS Word to edit email messages! Is this even possible?

I know this may sound a little weird, but I am a newer user of Macs and Mail. I was curious if there is a way to use my version of Word for Macs to edit my email messages. I liked using this feature with Outlook, but I have not figured out how to accomplish this with Mail.
I want more than just Mail underlining my word if I mispelled it. I want it to auto correct or something. I would like Mail to also automatically capitalize the first word in a sentence if I fail to or miss it. I don't even know how to get bullet points to appear within email messages. I miss this feature with Mail, can someone help?
iMac Mac OS X (10.4.8)

Sure, just open up a new document from within MS Word and when you are ready, copy and paste the text into the body of an email message and send it. This takes about two seconds to do: Command-A to select all the text, then Command-C to copy, then Command-V to paste.
As far as I know, there is no option to set up a different editor in Apple's Mail.app program; however, that option might be available in Entourage which comes with Microsoft Office 2004 for the Mac.

Want to use an iPAD with my Pismo, is this even possible

Ok, here come the chuckles...
I have a Pismo set to dual boot in either 9.2.2 or 10.4.1with the aid of firewire which houses OSX basically because I'm still using Photoshop 5.5 which runs faster in 9 than using 9 classic from OSX. I want to do Fingerpainting on a mobile device like an iPOD or iPAD and I am told my processor (400) won't support 10.5. Apple sales just said what did I expect, I was using a 10 year old computer.
Can I upgrade the processor on the Pismo to accomplish this or has my Pismo had it's day. I love it and it has been dual booting and doing just fine now for 2 years.
I do have one more problem... none of my IOMEGA devices, my JAZ and my ZIP will not run from my old system 9 since I made the change over to dual boot and I have a lot of paintings stored on them that I would like to transfer to CDs. I know too many questions in one post but maybe someone, somewhere is as broke as I am and needs to hang on and upgrade the impossible like I do. I'd like to address these issues to those of you who can't just go out and buy a new computer and all new software. My finances are so bad right now, I'm having a hard time paying attention, so please bear with me. Any thoughts?
sharon

Here's the spec page on your G3 Pismo - http://www.everymac.com/systems/apple/powerbookg3/stats/powerbook_g3_400fw.html
The max OS on the Pismo is Tiger 10.4.x Even if the Pismo could run Leopard 10.5, it would be slow. Snow Leopard 10.6 requires an Intel processor.
 Cheers, Tom

Hello guys, could some one please explain the best process using Photoshop CS2 to cut out the picture from a background?

Hello,
My name might be photoshopking, but I am still a newbie trying to learn
I am trying to present footwear on my website and the problem is all of my images need a white background. Because of this, I have to constantly remove the background detail from photos on the net which I currently just use the Magic Wand Tool which isnt great. I seem to find the edges are pixelated and blurry.
Would someone on the forum please be able to give me an example using a photo from my website about how to remove the background properly? This would massively help.
I am really struggling with this image: http://traineraddict.com/wp-content/uploads/nike-fragment-design-roshe-run-ld-1000-sp-692x 461_c.jpg
Any help would be massively appreciated
Danny

when ever I have to change the background i usually use the pen tool and that always seemed to work well for me i just have to take my time and it turns out fine and there is always YouTube if you are a visual learner hoped i helped

Using ML2005 as a backup rollover connection? Is this even possible???????

Hi,
I am trying to set my ML2005 fives in this configuration
Side A
Port 1 connected to a laptop
Port 7 has a RF attached to it
Port 8 has a CAT5e Cable.
Side B is the same.
I would like to run both at the same time, trunked, and I want it so that if I cut the Cat5 or the RF, traffic will still pass through the other connection.
When I connect both at the same time, I get massive errors because of the loop.
Any config ideas?
Thanks

You need to enable STP (spanning tree protocol) on both devices so that it will not cause a loop and the other link with act as a back.

Can anyone tell me if AirPort will work with an RCA STA-3850 Stereo Receiver? If so what would I need to set up to use with my Imac.

I have IMacPurchased in 2008 and want to get a AirPort that will connect to my speakers (UTAH's from 1975 in still very good condition). My stereo receiver is ~ 10 yrs old: RCA STA 3850 and still works like a charm. I really am NOT technically inclined and tend to stumble into solutions through 'dumb luck'. If anyone has a suggestion I would appreciate it.
Thank you.

The AirPort Express has a compatible analog audio output, you just need to connect it to an available input on your stereo. You may use the "AUX" or "CD" input, it's up to you. The RCA STA 3850 has no digital input.
Buy a cable that looks like this one:
6ft 3.5mm Stereo Plug/2 RCA Plug Cable - Black
Its length and the type of plating used for the connections are up to you as well.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

How to copy and paste into the same picture using quick selection tool

I have Photoshop CS5 and am new at this. What I need to do is copy and paste something in the image back into the same image. I can select it with the quick selection tool. All I want to do is paste a copy of it back into my image, move it and rotate it a little.
I've searched for an answer for a couple of days now and evidently, I'm searching for the wrong thing. This is what I need to do and I don't know how to get there. I do this in Digital Image Suite all the time and it's very simple. I know Photoshop is a lot more complicated but you can do more with it so I am trying to switch by using it to work on my projects. I've read articles where people say to use the quick selection tool and do a copy and paste but for me, all it does is add blank layer and the selection disappears. If I paste again, it pastes the item in the middle of the image and I can't move it or change it in any way.
One more question: in the Filters menu, all of the filters are gray-shaded. I read that I have to buy these filters, is that true?
Thank you for your help. If there is a beginner's forum where you would rather I post my questions, please let me know.

Once you have a selection, I use Ctrl C to copy and Ctrl V to paste. This will add a layer but may not look like it as it is in exactly the same spot in picture. If you paste again it will show up near middle of picture.
If you want to resize and rotate use Ctrl T.
More options are in Edit/Transform. I particularly like Warp.
All the filters should be active, but many only work in 8 bit RGB mode. To see what mode they are in click Image/Mode.

I can't sign into the itunes store using the 3G network?

I can't sign into the itunes store using the 3G network?
I keep getting the error "Can't connect to the iTunes Store"
This also makes it impossible for me to use itunes match with the 3G network.

I've got this as well and it seems to have affected only the Music and Home pages - do a search in the search bar and you will get to the films etc. Looks like somone goofed! If anyone from Apple checks this out, mine is the UK store. Home page and Music pages only affected.

My husband got a new ipad and set up his apple id without looking into the implications of that. Now I want to sync this ipad with our itunes so we can access it on here, but our itunes has a different apple id. Any way to do this?

My husband got a new ipad and set up his own apple id without looking into the implications of that. Now I want to sync this ipad with our itunes so we can access it on here, but our itunes has a different apple id. Any way to do this?

You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.

Problem updating pre-installed iPhoto and iMovie "to update this application, sign into the account you used to purchase it"

My dad bought a new retina macbook pro over a year ago.
The pre-installed iPhoto and iMovie applicaitons get this error when trying to download an update:
"to update this application, sign into the account you used to purchase it"
We are logged into the only account that he has ever had.
He has mountain lion.
It's very annoying and there's no way we know of to get around it. Searching and searching online led nowhere.
Please help!!!!!

You cannot.
As requested... You need to use the SAME Apple ID that Originally made the Purchase of whatever Application you are trying to Update.

I currently have Iphoto v. 9.1.4. There is an update v. 9.4.3 that I am unable to install. I keep getting a message, "you have updates available for other accounts. To update this application, sign into the account you used to purchase it."

I have iPhoto v 9.1.4. Update available is 9.4.3. I keep getting this message: "You have updates available for other accounts. To update this application, sign into the account you used to purchase it". I have done this and I keep getting the same message over and over again. Please help me!

Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
1. Follow the instructions in this Apple Support article.
2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
5. Triple-click anywhere in the line below on this page to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
Then repeat step 4.
6. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
7. Launch iTunes and select
Store ▹ Authorize This Computer
from the menu bar.
8. If you've moved any App Store apps out of the Applications folder, or into a subfolder, put them back. Never move or copy those applications. If you have backup copies of the apps on another volume, unmount it and try to update again.
9. Contact Account and Billing Support.

I keep getting an error message that reads "to update application sign into the account you used to purchase it" I am trying to download Final Cut Pro X 10.0.9 I am signed in with the account that I purchased Final cut Pro X I don't have another acco

I keep getting an error message that reads "to update application sign into the account you used to purchase it"
I am trying to download Final Cut Pro X 10.0.9
I am signed in with the account that I purchased Final cut Pro X
I don't have another account I'm not sure what's going on

Welcome to Apple Support Communities
Open the Mac App Store and go to Purchases. Do you see Final Cut Pro X listed?
If so, open a Finder window, choose Applications in the sidebar and delete Final Cut Pro X. Then, go to the Mac App Store and download Final Cut Pro X for free.
If you don't see it in Purchases, see if it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 If it doesn't work, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

I'm looking into the possibility of using Photoshop CS2 on Imac with Mavericks OS. Is this even possible, and if not, what would I need to do?

Similar Messages

Maybe you are looking for