I'm looking to install a new Hard Drive
i got my macbook about 2 years ago, im looking to get either
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136197
that one or
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152111
that one
can anyone confirm for me that these will work on my macbook?
and is the difference between 1.5 Gb/s and 3.0 Gb/s noticeable?
Any noteboot drive will work if it has a SATA interface and is no higher than 9.5 mm (check the specs at the manufacturer's website.) Both the drives you've referenced will fit in your MB.
The MB only supports SATA 1.5 GB/s so you will not see any increase due to the drive's support of the faster SATA 3.0 GB/s.
Similar Messages
-
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
I have a macbook pro mid 2010 17'' 2.66 i7 looking to put a new hard drive in it something like a 250 gb , orig drive 500 gb 5400 toshiba but i don;t really need that much space so i would like some input, type,speed,brand,compatibly,noise Thank You!!
There's no reason to install a smaller hard drive. In some cases, it may decrease performance.
Your MacBook Pro comes with a 5400 rpm hard drive, so what you can do is to install a smaller, 7200 rpm hard drive, so you will get a better performance. Any 2'5" SATA hard drive will work, but you can have a look at OWC for hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
HGST and Seagate hard drives have a good reputation, so you can purchase one of them -
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated. -
I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.
You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
To access the email:
Entering iCloud email settings manually in Snow Leopard or Leopard
Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page. -
I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?
Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
My computer crashed and we installed a new hard drive. How do I reinstall I tunes and sync my Ipod Nano 6th generation? Will
I lose everything I have on it?If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
http://www.wideanglesoftware.com/touchcopy/index.php -
How do i install a new hard drive using time machine
Hi there
I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
ThanksYou haven't inserted your new hard drive yet?.
There's two ways
1. install yourself
2. or pay someone to install it for you.
If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
Its very easy.
1. remove all screws and the lid.
2. remove screws from the black bracket which is holding your hard drive in place.
3. unplug your hard drive.
4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
5. insert these external screws to your new hard drive (there are four screws)
6. insert and plug your new hard drive.
7. screw the black bracket in firmly
8. attach lid and insert all screws firmly. -
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance -
I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.
Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock -
What do I need to do after installing a new hard drive?
I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.
https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks. -
I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-SteveBooting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.
https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name'' -
Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!
If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
I guess you'll have to erase and start over again now.
Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
Most commonly used backup methods
Maybe you are looking for
-
HELP!!! Cannot transfer music from one computer to another?
I have an older computer with itunes 7 and several purchased and music from CD's burned. The issue is that the older computer's cd-rw drive is broke. I just purchased a new computer. How do I get the music from my old computer into itunes on my new c
-
Change Event Name in iPhoto for iOS
I've bought in to Apple's promise of the "PC free" lifestyle with an iPad and the camera connectivity kit. A major problem is the fact that you couldn't manage events on the iPad with the standard "Photos" app. With the new "iPhoto for iOS", will I f
-
How to use Vendor Material Number in Purchase Order Creation - ECS Scenario
Hi SRM Gurus, We are in Extended Classic Scenrio - SRM 5.0. We want Vendor Material Number to be printed in the Purchase Order Layout. I remember in R/3 we have inforecord, wherein we have vendor Material number. Where do we maintain vendor material
-
How do I configure SPA8800 for a Viking FBI-1A?
I am working with a customer who has had a phone system failure. We're trying to replace the old Asterisk system that had a hardware interface card with a newer system and use an SPA8800 adapter (since I have that in stock and didn't have the hardwa
-
Documents on computer needed to go on Ipod
I have documents in my computer that I need to put on my Ipod and can't seem to figure out how too,can anyone help. Thanks.