I'm Looping for an european Mains adapter for my iPad air but not the hole adapter just the compatible top

Hi everybody, I'm looking for an european mains adapter for my iPad air, but not the hole adapter just the compatible top. Do You Knowledge if I can Bus ist anywhere?

Perhaps this. Or any ordinary travel adapter you can buy at any airport or electrical store.

Similar Messages

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT

We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting messages and FaceTime for my 13 yr old daughter. Do I have to create a different Apple ID for her?

We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting FaceTime and messages for my 12 yr. old. Do I have to set up a separate Apple ID for her to avoid this?

It's a trust issue. You can set them up so you don't receive each other's messages as long as you each have your own email address.
The trust issue is the fact that either of you can change the separation at any time via Settings by checking the appropriate (inappropriate?) email address.
To be absolutely sure you can never receive each other's messages will require two Apple IDs.

I have just recently bought a MacBook Air. I am looking for an email which I put into a folder on my Mac Pro. The smart folders have come across to the Air, but not the 'On my Mac' folders. Are they lost?

I have just recently bought a MacBook Air. I am looking for an email which I put into a folder on my Mac Pro. The smart folders have come across to the Air, but not the 'On my Mac' folders. Are they lost?

Are you sure that the "On My Mac" folders weren't empty? If all your mail accounts are IMAP, they may have been.

If i backup an app for example Music Downloader as it contains like 300 songs and now i want to replace my iphone 5 so when i restore the app from itunes do i get back all the content in the app or just the app itself ??..

If i backup an app for example Music Downloader as it contains like 300 songs and now i want to replace my iphone 5 so when i restore the app from itunes do i get back all the content in the app or just the app itself ??..

Hey Hussain,
I am not sure whether the music will get restored.
Anyway try this
1.Connect iPhone to PC.
2.Open iTunes
3.Open iPhone Summary
4.Go to Apps Tab
5.Under File Sharing Section Click on Music Downloader
6.Right side if you see your songs click on one song and press (CTRL + A).(hope you are using windows) and click on save and then save to a folder on your computer.
7. Later just do steps till 5 to put to new iPhone then ...........
8.Click on save and select the music files which u want to put in that app.
9.Click on apply to sync.
10.You should be having the music in that app
Hope it helps,
Rohit

My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

Didn't work but thx
Mark Flohr
[email protected]
949-636-3069

I can not connect my I Pad to a Samsung TV. Does the following make any sense? Dear Phillip Baker, Thank you for contacting Samsung Electronics. We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can

Will the I Pad 2 connectr to a Samsung TV to play a movie from I Tunes. Samsung sent the following.
Dear Phillip,
Thank you for contacting Samsung Electronics.
We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can connect devices which are DLNA compatible and PC or laptops which are
installed with PC Share manager. If the iPad supports DLNA, you can connec it to the TV and play the files
supported by the TV. The TV supports following file video types : MKV, AVI, MP4, WMV, MPEG, MPG, ASF, 3GP, TS, TP, TRP. If you have any other questions, please feel free to contact us.
Thank you.
Samsung Online Support.
Any help?

What method of connection are you trying to use? DLNA looks like a standard for sharing media between devices over your home network, but I'm fairly certain the iPad doesn't support this protocol. Apple sell adaptors to connect your iPad directly to TV using composite or HDMI connectors. I'd be surpsied if your TV won't support either of those.
tt2

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?

So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro. Results were reproduced. The verdict is:
- complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
- different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
- using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
- adding an Acrobat watermark to the file cuts the file size roughly in half.
- just using Save As to another filename has no effect on file size.
- generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
- generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
It appears that Acrobat 9's manner of adding links is what's bloating the files, and in my case it's probably not related to images or image resolution/print quality. It's a shame, because Acrobat 9 seems to have made some improvements to the Review Tracker interface, and a few other bells and whistles which I haven't really gotten around to exporing yet. But unless I find a way to keep my links and the PDF file sizes comparable to what I was getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8.

In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

Total life saver. Thank you

HT1414 I restored my Iphone 3G using the settings on my phone to remove photos and contacts, however since then my phone remians sitting on the apple sign on start up and has been like this for days, have tried plugging it into my itunes but not recognise

I restored my Iphone 3G using the settings on my phone to remove photos and contacts, however since then my phone remians sitting on the apple sign on start up and has been like this for days, have tried plugging it into my itunes but not recognised can anyone help

See this:
iPhone and iPod touch: Unable to restore

IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

Hi Anjohi,
Thanks for visiting Apple Support Communities.
If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
iOS: Edited photos show original photo after import or in other apps
All the best,
Jeremy

I have download iLife for free in ipad air but I deleted imovies ...after dat I try to install it agine n giving message like u already purchased it will be download for free.....after dat it agine coming cloud symbol.pls help in downloading iMovie .

I am new to apple family.on new year I brought this amazing devise .I have download iLife for free in ipad air but I deleted imovies ...after dat I try to install it agine n giving message like u already purchased it will be download for free.....after dat it agine coming cloud symbol.pls help in downloading iMovie .

I am new to apple family.on new year I brought this amazing devise .I have download iLife for free in ipad air but I deleted imovies ...after dat I try to install it agine n giving message like u already purchased it will be download for free.....after dat it agine coming cloud symbol.pls help in downloading iMovie .

Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things

Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things

Settings>General>Accessibilty and turn off white on black.
Matt

I BOUGHT an application from my iphone Application icon and paid 2.99 dollars too, for phone tracker , downloaded sucessfully and its working too but not tracking the phones as mentioned in the description can any one support me??? better from apple

I BOUGHT an application from my iphone Application icon and paid 2.99 dollars too, for phone tracker , downloaded sucessfully and its working too but not tracking the phones as mentioned in the description can any one support me??? better from apple!!

Is this the app you're referring to?
http://itunes.apple.com/us/app/phone-tracker/id348537489?mt=8
As you'll note it's made by Presselite and that page has a link to their support.
Also, you'll find it best not to post questions about iPhone apps in the AppleWorks forum. Best to contact the makers of the app.
Regards
TD

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

I'm Looping for an european Mains adapter for my iPad air but not the hole adapter just the compatible top

Similar Messages

Maybe you are looking for