I'm loosing my network signal with my carrier.

I can actually physically see the tower.  The only way to re-establish the connection is to reset the network.  Is there something wrong with my phone?

It seems to happen in specific areas.  The Carrier has told me that they are not having any issues with the tower in question.  My area is remote so the tower i'm looking is the tower the phone should be connecting to... since there is no other towers in the area.  Is this a common problem with these phones... and does apple need to address a refresh rate with the towers in the software?

Similar Messages

  • How to convert a baseband signal with bandwidth 20MHz to an RF signal with center frequency 2.4GHz and the same bandwidth 20MHz

    Hi,
            I was wondering how to convert a complex baseband signal with bandwidth 20MHz to an RF signal with center frequency 2.4GHz and the same bandwidth 20MHz in simulation. I tried 
        1. Multiplying the complex double type baseband signal (1-D array) by exp( j * 2 * pi * 2.4E+9 * T ) where T is the symbol period of baseband signal.
        2. Usage of MT upconvert baseband but doesnt keep the BW constant
    Looking forward to your help. 

    I should add that you can multiply your baseband signal with two carrier signals that are shifted by 90° and then add or subtract the result to obtain upper or lower sideband only. You can try to search about IQ moduilators/demodulators to learn more.
    Cheers
    Edgar

  • HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

  • Is there problems with the network/signal in TA3 Taunton area

    Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

    Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!     

  • Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

    cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

    Try restarting your WiFi router by removing power to it for 30 seconds.

  • Poor signal WITH Network extender.

    Hoping to get some help here so i dont have to call verizon.
    Im just recieved my verizon network extender, the SCS-2u01 model.
    I installed it, waited for it to boot and and restricted it to just my wife and I phone numbers.
    We are for sure connected to it, *48 confirms and get the beeps when placing calls, but im getting mostly 1 bar of service within 30feet and literally even holding the phone right up against the thing gets usually 2 bars, sometimes 3, never 4.
    We just switched from sprint and with sprint we had and airave which appears to be 100% identical device, setup identical and would would get full signal
    with in 40 feet(all downstairs and even outside) and 2-3 bars upstairs and way out in the yard.
    Ideas?The only thing i can think of is it it 2 feet from our wireless router, although no different then the airave.

    I recently started using the Sprint Airave so I should be able to contribute to this.
    Network extenders only have a few pieces to them.  They have a broadband connection port which needs to be hooked up to your modem, some ethernet ports that hook up to your router/computer, an antenna for broadcasting the wireless signal and a GPS antenna for 911 emergency situations when you cannot place it close to a window. 
    If your signal is not strong inside your house then normal wireless troubleshooting steps should apply.  I'd suggest starting with a site survey and moving your NE around the house until you can find a spot that performs better.  Try locations close to windows and away from anything metal/electric if possible.  There might be electrical equiptment or competing wireless signals that are interfering with your reception in its current location.  If your NE is still not performing after relocating it, then contact VZW for support and a possible replacement device.
    Site Survey walkthrough:
    http://3gstore.com/page/13_will_an_antenna_help_me.html
    Verizon lets you manage your NE online through the My Verizon account.  Once you sign into the account you should be able to make any additional config changes that you want.  I'd look into changing the wireless channels or broadcast mode to see if there is an improvement.
    More details available here:
    http://www.verizonwireless.com/b2c/store/accessory?action=gotoSetup

  • P1 Problem with network signal

    My p1 is losing signal when is on 2G network on 3G network signal is poor, my phon with that problem is unusable

    First of all, put your SIM card in another mobile and see if there is any difference in signal strength.If it works OK in a different phone, then I would suggest a software update on your phone.

  • Issue with mobile network signal ("Searching")

    I recently purchased 2 iPad from Singapore and upon retuning to Malaysia, i applied for 2 mobile broadband package from the same mobile provider.
    Issue i am facing is, on one of the ipad, the mobile network signal bar displays "Searching" almost all the time; only a few times it displays strong signal with 3G icon then it drops to "Searching" again. I tried to swap the micro sim around between both ipad but no such issue on the 2nd ipad which is consistenly strong signal.
    I even restored the ipad (factory shipped 3.2.2) but no success.
    What should i do?

    After further test, I noticed the unit can't find any mobile provider under Settings > Carrier when signal bar displays "Searching".
    Enabling airplane mode does not help either; only workaround is to disable Cellular Data under Settings > Cellular Data then Enable it again.

  • No network signal on Xperia L

    Just got an Xperia L from my network provider. I placed my sim in it but there is no network signal at all. I put my sim back in my old phone and checked for network signal and there was signal. So it's really a problem with the phone. Do I need to check the network settings? I've tried searching for available networks and the phone detects my provider. But it does not want to connect whether I choose connect automatically or choose manually. Please help. Thanks.

    i have the same problem with network reception..it comes on and off but when i place my sim card in another device network reception is full all the time.whats wrong with xperia phones...i begginig to loose trust.

  • When I answer my vonage voip phone I loose my Airport signal.

    Since I've installed Snow Leopard OS, everytime I answer my home phone which is Vonage Voip, I loose my Airport signal on my MacBook. It has to be related to the OS, because my other laptop which is PC works fine with the phone in use and the same Airport network.
    Has anyone else encountered this issue?

    This is strange. Your Vonage phone using a small Vonage router with an Ethernet and an RJ11 port that connects a phone cable to a regular phone. All voip on the net is UDP, not TCP/IP.
    I am trying to understand how you network is set up. Is it from some kind of modem (cable, DSL or something else) to a wireless router. What router is that router? Then you have the Vonage router connect to an Ethernet port on the wireless router. Then the phone connects to the Vonage router's phone port. Is this correct?
    I am just wondering if your wireless router is trumping all traffic for that UDP traffic generate by the Vonage router.

  • Network problem with Verizon in NYC and Jersey City

    Hi
    I have an IPhone 5 on my friends shared plan and ever since I joined Verizon , the network signal has been pathetic. I feel I am being duped of monthly bills as the there is nil coverage on my 41st floor office in downtown Manhattan as well as my residence in downtown Jersey City. Forget about 4G , even 3G stinks for Verizon in this area. My problem is one pays them to have phone for 24 hrs connectivity but Verizon doesn't offer me connectivity for 12 hours of the day I am in office and the only net connectivity on my iphone is when I am back home on my home wifi. I can't understand Verizon being a leader in telecom , can't invest in their infrastructure so that its users don't have to bear this pain.The kind of service you offer, I am sorry to say , is not up to your standards. Kindly suggest how would you solve my problem, I m barely 5 months into the plan and just don't want to be a cash cow to you where once I have signed a contract with you , you forget about your promise to offer me world class service and just expecting monthly payments from me.
    Regards
    NK
    >>Edited to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

        Hello NK
    I would be happy to address any concerns today. I want you to love us. Service on the 41st floor could be very challenging. Here's a great link that will show you the network extender:http://bit.ly/AKkC
    It's like a mini cell tower. What is your home zip code. I will check the area and look into this with you.
    JoeL_VZW
    Please follow us on twitter @vzwsupport

  • Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching'  signal where my network signal should be upon which I have  to 'Reset all Settings' to get the phone normal again.Is  there a solution to this?

    Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching'  signal where my network signal should be upon which I have switch the phone off then on then 'Reset all Settings' to get the phone normal again.Is  there a solution to this?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • TS1424 When I ave network coverage, my wi if drops out. I am only able to access my music on my phone when I have no network signal, otherwise all songs are greyed out

    I can only access my wi if, when I have no network signal. As soon as I move to a better signal area, my wi Di connection drops out.
    I have music on my phone, but again, I cannot access this in the gym, when I have a network signal.
    I also cannot access some of my apps, as they are greyed out. Please advise

    Grey text when you look at the content and a lock symbol at the bottom of the screen just indicates that the iPod is set to sync automatically with iTunes. If you want to connect an iPod to multiple computers, play the iPod songs through iTunes, delete songs from the iPod, drag songs from iTunes, add playlists to the iPod etc. you need to change the update setting to "manually manage songs and videos". The text will change from grey to black and everything will be directly accessible through iTunes:
    Managing content manually on iPod
    Using iPod with Multiple computers
    Syncing Music to iPod
    Something to remember about using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

  • Losing Wi-Fi signal with cell signal simultaneously

    I'm in a crap area. I have 1 bar of 1x data where I am located. To counter that I have Wi-Fi. I'm the only user of the Wi-Fi and it's secured as well. My problem is my Wi-Fi connection on my phone disappears completely if I lose that one bar of 1x signal. I am able to reload my web pages while I have no signal with the tiny little no smoking sign at the top of my screen, but as soon as that one bar comes back, I lose all signal on Wi-Fi all over again!! It happens 1,324,501 times a day (that's a sarcastic count) but it leaky does happen extremely frequently. It happened 3 times just trying to your this on my phone. I've already deleted the Wi-Fi settings on my phone multiple times and reboot my router multiple times as well. How can I fix? ?

    My zip code is 28533. It works way better away from this area, I'm on a
    military base with no signal on it so I use Wi-Fi, which doesn't work with
    my phone. I've tried other Wi-Fi networks and they work fine unless I get
    low cell phone reception then the same problem starts to occur. My roommate
    has the same phone but with a different service provider and his phone
    works perfect with the Wi-Fi, as does my laptop and my 3Ds too. It's just
    my phone that acts foolish.
    On Nov 21, 2013 8:20 PM, "Verizon Wireless Customer Support" <

Maybe you are looking for

  • File path control - browse button colour/color

    I can't change the colour of the browse button on a file path control. I'm using LV 8.5, but I think I have the same problem on 7.1 Is the only way to change the colour to customise the control? Every other part of it seems to take colours from the t

  • How to send IP pacekts by LabVIEW RT

    In a project,I use PXT RT controler and cRIO , need send IP packets to communicate with other PCs. I can use raw socket to send IP packets on the Windows,how to send IP pacekts on the Pharlap and Vxworks by by LabVIEW RT? There is somebody can help m

  • Foreign currency  invoice not shown in local currency

    Dear Experts , Can you please help me to resole In my company code currency is INR and my foreign currency is USD , when i posted a invoice in foreign currency it shows in print preview only in foreign currency that is USD but i want to see the local

  • Adapter for MD-1 Music Stand for Nokia 6500 Slide

    I currently Own a Nokia Music Stand MD-1 that has a Pop Port connection. I use it with my Nokia 6280 Phone. I am thinking of Upgrading my phone to a Nokia 6500 Slide and want to know if there is an adapter I can purchase so I can continue to use my M

  • Sweet spot MacPro line for CS?

    Dear Group, Since i got a suddenly dead G5 too, I'm suddenly wondering which MacPro might be the sweet spot for CS4 performance, now, and CS5. I'm just a typical photoshop user ranging from web to layered 300 MB files. I've been out of the loop on im