I'm missing my preloaded Outlook mail after using it for two days/new HP Envy

I have a new HP Envy 64bit 17" running Windows 10,  I went through the set up of mail using Outlook that was loaded when I got it.  I set up the mail account (pop) and successfully imported mail to my new inbox.  I used the mail outlook app for 2 days just fine both sending and receiving.  I'm finishing set up for my computer last night, I believe? I completed set up for Secure Pass Fingerprint; at least it said successful ect.  This morning, I opened the computer, clicked on the mail icon on the windows pane, and there is no outlook, inbox, or anything.  There is a screen that says Mail, not synced yet, and basically blank.  There are icons on the lower left of the screen there such as a calendar, which I also set up yesterday and in fact all my appointments are there. What happened to my email/Outlook?  Did I do something weird, or just stupid?  THANKS

MsFoof wrote:
...  I opened the computer, clicked on the mail icon on the windows pane, and there is no outlook, inbox, or anything.  There is a screen that says Mail, not synced yet, and basically blank. ......Hi, You have to wait - I don't know why (could be from Microsoft exchange servers or even your ISP). I use few devices inside my house but AT THE SAME TIME, one machine can get emails before the others. Normally my Windows 8.1 phone is the first one to sync my Outlook and Hotmail accounts. I deleted emails on one machine and they sometimes they appear again on other machines. Regards.

Similar Messages

  • My icloud mail has not worked for 2 days.  the tech support people say they dont even know there is a problem.

    My mail has not worked for two days - in the US.  The tech support people on the phone claim they don't even know there is a proplem.  Anyone know whats going on? 

    http://www.apple.com/support/icloud/systemstatus/
    People reading this forum are just other users like you (who frankly already know there are a lot of frustrated users out there and cannot tell you anything you won't see in the above link).  Send your feedback to http://www.apple.com/feedback/icloud.html

  • After using migration assistant to a new Mac 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    After using migration assistant to my new MacBook Retina 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    See if this previous discussion/link to microsoft support helps
    Re: There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

  • BSOD after using firefox for a minute.

    Not sure what happened exactly but here's the details.
    Basically I run using my on board Gigabit lan when at home on my desktop, however my girlfriends router is not on same level as her computer so wireless is necessary. I purchased a D-Link 160 dual band usb adapter to connect at her place. I installed the drivers then plugged in the adapter as instructed. Everything was fine at her house. When I got home I went back to my Gigabit hardware again. My computer ran fine IE10 worked fine but for some reason after using Firefox for about a minute it would crash my computer BSOD. Facebook, Google, trying to research issue so basically any website caused the problem. So I thought it could have been the D-Link drivers but I rolled my system back to before the D-Link install and still had the issues. I re installed my Firefox and so far all is well. So perhaps it was an update or perhaps it was drivers interfering. The date it started happening is July 5th. So depending when last update was could have been that.
    As for Specs
    Windows Pro x64
    Asus M5A99X EVO R2.0
    Kingston Hyper X genisus 16GB
    AMD FX-8320
    2x 500GB Seagate Barracuda Raid 0
    Asus GTX 650 Ti Boost
    Thats most parts that could remotely be causing the issue. Let me know if you solve anything if its just me the D-Link or an update would just like to know what went wrong. As I said re installing Firefox worked so perhaps drivers changed settings or something but i think system roll back should have fixed that I am not a pro though so any feedback would be appreciated.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

    I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
    My battery then ran out, and my iPod was dead for two days.
    My iPod charging cable wasn't working, so i went out to buy a new one.
    After charging it with the new cable, it would not connect to the internet.
    My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
    I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
    Is there any way to fix this?

    If not this
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Icloud mail out on one account for two days in texas

    Does anyone know what is wrong with icloud mail? My account is fine, husband's has not worked for two days.  We are in the Dallas, Texas area.

    This is a second day of no icloud service. Completely unacceptable! I've been an apple guy since 1985 but this is going to send me away. They want the iphone and ipad to be business tools - then it has to have back up systems in place. These are not toys to us! They had better not brag about icloud services at the announcement today - and they had better address the problem up front and admit to it at the event! It's all over the world and must be far more than the 1%. If that's the case - then they're just lying about the extent - which is really not cool.
    Fix it now!

  • [SOLVED] Getting freezes after using dwm for some time and exiting it

    Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
    Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
    This is my /var/log/Xorg.0.log
    [ 7.573]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 7.573] X Protocol Version 11, Revision 0
    [ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
    [ 7.574] Build Date: 01 July 2013 10:48:42AM
    [ 7.574]
    [ 7.574] Current version of pixman: 0.30.0
    [ 7.574] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
    [ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 7.575] (==) No Layout section. Using the first Screen section.
    [ 7.575] (==) No screen section available. Using defaults.
    [ 7.575] (**) |-->Screen "Default Screen Section" (0)
    [ 7.575] (**) | |-->Monitor "<default monitor>"
    [ 7.575] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 7.575] (==) Automatically adding devices
    [ 7.575] (==) Automatically enabling devices
    [ 7.575] (==) Automatically adding GPU devices
    [ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 7.578] Entry deleted from font path.
    [ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 7.578] Entry deleted from font path.
    [ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 7.578] Entry deleted from font path.
    [ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 7.578] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 7.578] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 7.578] (II) Loader magic: 0x7fdc20
    [ 7.578] (II) Module ABI versions:
    [ 7.578] X.Org ANSI C Emulation: 0.4
    [ 7.578] X.Org Video Driver: 14.1
    [ 7.578] X.Org XInput driver : 19.1
    [ 7.578] X.Org Server Extension : 7.0
    [ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 7.580] Initializing built-in extension Generic Event Extension
    [ 7.580] Initializing built-in extension SHAPE
    [ 7.580] Initializing built-in extension MIT-SHM
    [ 7.580] Initializing built-in extension XInputExtension
    [ 7.580] Initializing built-in extension XTEST
    [ 7.580] Initializing built-in extension BIG-REQUESTS
    [ 7.580] Initializing built-in extension SYNC
    [ 7.580] Initializing built-in extension XKEYBOARD
    [ 7.580] Initializing built-in extension XC-MISC
    [ 7.580] Initializing built-in extension SECURITY
    [ 7.580] Initializing built-in extension XINERAMA
    [ 7.580] Initializing built-in extension XFIXES
    [ 7.580] Initializing built-in extension RENDER
    [ 7.581] Initializing built-in extension RANDR
    [ 7.581] Initializing built-in extension COMPOSITE
    [ 7.581] Initializing built-in extension DAMAGE
    [ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
    [ 7.581] Initializing built-in extension DOUBLE-BUFFER
    [ 7.581] Initializing built-in extension RECORD
    [ 7.581] Initializing built-in extension DPMS
    [ 7.581] Initializing built-in extension X-Resource
    [ 7.581] Initializing built-in extension XVideo
    [ 7.581] Initializing built-in extension XVideo-MotionCompensation
    [ 7.582] Initializing built-in extension XFree86-VidModeExtension
    [ 7.583] Initializing built-in extension XFree86-DGA
    [ 7.583] Initializing built-in extension XFree86-DRI
    [ 7.584] Initializing built-in extension DRI2
    [ 7.584] (II) LoadModule: "glx"
    [ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 7.586] (II) Module glx: vendor="X.Org Foundation"
    [ 7.586] compiled for 1.14.2, module version = 1.0.0
    [ 7.586] ABI class: X.Org Server Extension, version 7.0
    [ 7.586] (==) AIGLX enabled
    [ 7.587] Loading extension GLX
    [ 7.587] (==) Matched intel as autoconfigured driver 0
    [ 7.587] (==) Matched nouveau as autoconfigured driver 1
    [ 7.587] (==) Matched nvidia as autoconfigured driver 2
    [ 7.587] (==) Matched nv as autoconfigured driver 3
    [ 7.587] (==) Matched intel as autoconfigured driver 4
    [ 7.587] (==) Matched vesa as autoconfigured driver 5
    [ 7.587] (==) Matched modesetting as autoconfigured driver 6
    [ 7.587] (==) Matched fbdev as autoconfigured driver 7
    [ 7.587] (==) Assigned the driver to the xf86ConfigLayout
    [ 7.587] (II) LoadModule: "intel"
    [ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 7.592] (II) Module intel: vendor="X.Org Foundation"
    [ 7.592] compiled for 1.14.2, module version = 2.21.12
    [ 7.592] Module class: X.Org Video Driver
    [ 7.592] ABI class: X.Org Video Driver, version 14.1
    [ 7.592] (II) LoadModule: "nouveau"
    [ 7.592] (WW) Warning, couldn't open module nouveau
    [ 7.592] (II) UnloadModule: "nouveau"
    [ 7.592] (II) Unloading nouveau
    [ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "nvidia"
    [ 7.592] (WW) Warning, couldn't open module nvidia
    [ 7.592] (II) UnloadModule: "nvidia"
    [ 7.592] (II) Unloading nvidia
    [ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "nv"
    [ 7.592] (WW) Warning, couldn't open module nv
    [ 7.592] (II) UnloadModule: "nv"
    [ 7.592] (II) Unloading nv
    [ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "vesa"
    [ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 7.593] (II) Module vesa: vendor="X.Org Foundation"
    [ 7.593] compiled for 1.14.0, module version = 2.3.2
    [ 7.593] Module class: X.Org Video Driver
    [ 7.593] ABI class: X.Org Video Driver, version 14.1
    [ 7.593] (II) LoadModule: "modesetting"
    [ 7.593] (WW) Warning, couldn't open module modesetting
    [ 7.593] (II) UnloadModule: "modesetting"
    [ 7.593] (II) Unloading modesetting
    [ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 7.593] (II) LoadModule: "fbdev"
    [ 7.593] (WW) Warning, couldn't open module fbdev
    [ 7.593] (II) UnloadModule: "fbdev"
    [ 7.593] (II) Unloading fbdev
    [ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 7.594] (II) VESA: driver for VESA chipsets: vesa
    [ 7.594] (++) using VT number 1
    [ 7.594] (WW) Falling back to old probe method for vesa
    [ 7.594] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 7.594] (==) intel(0): RGB weight 888
    [ 7.594] (==) intel(0): Default visual is TrueColor
    [ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 7.594] (**) intel(0): Relaxed fencing enabled
    [ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
    [ 7.594] (**) intel(0): Triple buffering? enabled
    [ 7.594] (**) intel(0): Framebuffer tiled
    [ 7.594] (**) intel(0): Pixmaps tiled
    [ 7.594] (**) intel(0): 3D buffers tiled
    [ 7.594] (**) intel(0): SwapBuffers wait enabled
    [ 7.594] (==) intel(0): video overlay key set to 0x101fe
    [ 7.594] (II) intel(0): Output eDP1 has no monitor section
    [ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 7.596] (II) intel(0): Output VGA1 has no monitor section
    [ 7.596] (II) intel(0): EDID for output eDP1
    [ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
    [ 7.596] (II) intel(0): Year: 2012 Week: 0
    [ 7.596] (II) intel(0): EDID Version: 1.4
    [ 7.596] (II) intel(0): Digital Display Input
    [ 7.596] (II) intel(0): 6 bits per channel
    [ 7.596] (II) intel(0): Digital interface is DisplayPort
    [ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 7.596] (II) intel(0): Gamma: 2.20
    [ 7.596] (II) intel(0): No DPMS capabilities specified
    [ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.596] (II) intel(0): First detailed timing is preferred mode
    [ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
    [ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
    [ 7.596] (II) intel(0): Manufacturer's mask: 0
    [ 7.596] (II) intel(0): Supported detailed timing:
    [ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
    [ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
    [ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
    [ 7.596] (II) intel(0): LG Display
    [ 7.596] (II) intel(0): LP156WF4-SPB1
    [ 7.596] (II) intel(0): EDID (in hex):
    [ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
    [ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
    [ 7.596] (II) intel(0): 1c505400000001010101010101010101
    [ 7.596] (II) intel(0): 010101010101e83580a8703816402024
    [ 7.596] (II) intel(0): 550059c2100000180000000000000000
    [ 7.596] (II) intel(0): 00000000000000000000000000fe004c
    [ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 7.596] (II) intel(0): 004c503135365746342d535042310069
    [ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Printing probed modes for output eDP1
    [ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
    [ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 7.598] (II) intel(0): EDID for output VGA1
    [ 7.598] (II) intel(0): Output eDP1 connected
    [ 7.598] (II) intel(0): Output VGA1 disconnected
    [ 7.598] (II) intel(0): Using exact sizes for initial modes
    [ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
    [ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
    [ 7.598] (==) intel(0): DPI set to (96, 96)
    [ 7.598] (II) Loading sub module "fb"
    [ 7.598] (II) LoadModule: "fb"
    [ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 7.599] (II) Module fb: vendor="X.Org Foundation"
    [ 7.599] compiled for 1.14.2, module version = 1.0.0
    [ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.599] (II) Loading sub module "dri2"
    [ 7.599] (II) LoadModule: "dri2"
    [ 7.599] (II) Module "dri2" already built-in
    [ 7.599] (II) UnloadModule: "vesa"
    [ 7.599] (II) Unloading vesa
    [ 7.599] (==) Depth 24 pixmap format is 32 bpp
    [ 7.599] (II) intel(0): [DRI2] Setup complete
    [ 7.599] (II) intel(0): [DRI2] DRI driver: i965
    [ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
    [ 7.599] (II) UXA(0): Driver registered support for the following operations:
    [ 7.599] (II) solid
    [ 7.599] (II) copy
    [ 7.599] (II) composite (RENDER acceleration)
    [ 7.599] (II) put_image
    [ 7.599] (II) get_image
    [ 7.599] (==) intel(0): Backing store disabled
    [ 7.599] (==) intel(0): Silken mouse enabled
    [ 7.600] (II) intel(0): Initializing HW Cursor
    [ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 7.600] (==) intel(0): DPMS enabled
    [ 7.600] (==) intel(0): Intel XvMC decoder enabled
    [ 7.600] (II) intel(0): Set up textured video
    [ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
    [ 7.600] (==) intel(0): hotplug detection: "enabled"
    [ 7.613] (--) RandR disabled
    [ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
    [ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 7.634] (II) AIGLX: Loaded and initialized i965
    [ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
    [ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.669] (II) LoadModule: "evdev"
    [ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 7.670] (II) Module evdev: vendor="X.Org Foundation"
    [ 7.670] compiled for 1.14.2, module version = 2.8.1
    [ 7.670] Module class: X.Org XInput Driver
    [ 7.670] ABI class: X.Org XInput driver, version 19.1
    [ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.670] (**) Video Bus: always reports core events
    [ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.670] (--) evdev: Video Bus: Found keys
    [ 7.670] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
    [ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 7.670] (**) Option "xkb_rules" "evdev"
    [ 7.670] (**) Option "xkb_model" "pc104"
    [ 7.670] (**) Option "xkb_layout" "us"
    [ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.684] (**) Video Bus: always reports core events
    [ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
    [ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.684] (--) evdev: Video Bus: Found keys
    [ 7.684] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
    [ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 7.684] (**) Option "xkb_rules" "evdev"
    [ 7.684] (**) Option "xkb_model" "pc104"
    [ 7.684] (**) Option "xkb_layout" "us"
    [ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.685] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.685] (**) Power Button: always reports core events
    [ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.685] (--) evdev: Power Button: Found keys
    [ 7.685] (II) evdev: Power Button: Configuring as keyboard
    [ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 7.685] (**) Option "xkb_rules" "evdev"
    [ 7.685] (**) Option "xkb_model" "pc104"
    [ 7.685] (**) Option "xkb_layout" "us"
    [ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 7.685] (II) No input driver specified, ignoring this device.
    [ 7.685] (II) This device may have been added with another device file.
    [ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 7.685] (**) Sleep Button: always reports core events
    [ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 7.685] (--) evdev: Sleep Button: Found keys
    [ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
    [ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 7.685] (**) Option "xkb_rules" "evdev"
    [ 7.685] (**) Option "xkb_model" "pc104"
    [ 7.685] (**) Option "xkb_layout" "us"
    [ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
    [ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
    [ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
    [ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
    [ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
    [ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
    [ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
    [ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
    [ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
    [ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
    [ 7.686] (**) Option "xkb_rules" "evdev"
    [ 7.686] (**) Option "xkb_model" "pc104"
    [ 7.686] (**) Option "xkb_layout" "us"
    [ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 7.686] (II) No input driver specified, ignoring this device.
    [ 7.686] (II) This device may have been added with another device file.
    [ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
    [ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 7.686] (**) Option "xkb_rules" "evdev"
    [ 7.686] (**) Option "xkb_model" "pc104"
    [ 7.686] (**) Option "xkb_layout" "us"
    [ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
    [ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 7.687] (II) LoadModule: "synaptics"
    [ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
    [ 7.687] compiled for 1.14.1, module version = 1.7.1
    [ 7.687] Module class: X.Org XInput Driver
    [ 7.687] ABI class: X.Org XInput driver, version 19.1
    [ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 7.687] (**) Option "Device" "/dev/input/event7"
    [ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 7.810] (**) Option "TapButton1" "1"
    [ 7.810] (**) Option "TapButton2" "2"
    [ 7.810] (**) Option "TapButton3" "3"
    [ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
    [ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 7.853] (II) No input driver specified, ignoring this device.
    [ 7.853] (II) This device may have been added with another device file.
    Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
    In case it's of any use, this is my # uname -a
    Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
    Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
    Any ideas or advice to point me in the right direction would be very much appreciated.
    Thanks in advance.
    Last edited by contiver (2013-08-16 20:25:34)

    I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
    static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
    but it didn't work for me.
    Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
    BUG: unable to handle kernel paging request at ffffc90014ce8000
    IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
    Oops: 0002 [#1] PREEMPT SMP
    Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
    CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
    Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
    task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
    RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
    RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
    RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
    RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
    R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
    R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
    FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Stack:
    0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
    ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
    0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
    Call Trace:
    [<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
    [<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
    [<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
    [<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
    [<ffffffff813200bd>] redraw_screen+0x17d/0x240
    [<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
    [<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
    [<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
    [<ffffffff8130b407>] tty_ioctl+0x277/0xb90
    [<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
    [<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
    [<ffffffff8117328e>] ? ____fput+0xe/0x10
    [<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
    [<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
    [<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
    Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
    RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    RSP <ffff8800797efaa8>
    CR2: ffffc90014ce8000
    ---[ end trace aff6cb5ad5097aef ]---

  • I have created a merged letter (mail merge) using Word for Mac. But I cannot merge the letter to my contacts which are in the Apple Mail Application. Is it possible to do this?

    I have created a merged letter (mail merge) using Word for Mac. But I cannot merge the letter to my contacts which are in the Apple Mail Application. Is it possible to do this?
    Word for Mac 8
    i mac intel

    This is the Apple Keynote discussion, you should post in the Microsoft forums where the experts there can help you, there is a dedicated mailmarge discussion here:    Microsoft Office Word Mailmerge

  • I am having difficulty locating my library. This has just happened, after using iTunes for many years. What's up with that?

    I am having difficulty locating my library. This has just happened, after using iTunes for many years. What's up with that?

    Hi geojobowden,
    If you opened up iTunes and your library appeared empty, this article may help:
    iTunes creates an empty library file in Windows
    http://support.apple.com/kb/TS2715
    Take care,
    - Ari

  • ABAP Program gives error after running  successfully for few days / months

    I have a problem that sometimes my programs start giving errors or does not run at all after successfully running for few days / months.
    But, when I copy the same program with a different name (without any changes ) it starts running again.
    Yesterday I had another problem. I was sending a request to be transported to Production Client, and the request was not getting transported. But when I changed just the name of the program, It was transported to Production Client.
    I can't understand where the problem lies and what happens to the programs after running successfully for few days. All I have to do is just copy that programm into another name and it starts running.
    Can anyone help me?
    Regards,
    SK Daniel

    about the transport thing..i had the same problem few months back the reason was,  i included a table which is having different package  from my program..so wot im thinking is when you creating a different program u might be assigning different package to this new program  and this package is same as all the tables included in your program...
    regards

  • Do I need to reinstall everything to use a computer for a paid membership after using it for a trial under a different account?

    Do I need to reinstall everything to use a computer for a paid membership after using it for a trial under a different account? The programs say "start trial" or "trial ended" or "buy" next to them even after I sign in with my membership and then download them.

    Hi Marcella,
    You need not re-install your applications. Just activate your creative cloud license by signing out of the Creative cloud application and then sign back in.
    Please refer to the help document below for the steps:
    Sign out, Sign in | Creative Cloud Desktop app
    Regards,
    Sheena

  • My macbook has recently started getting really hot after using it for a brief time, is there something wrong

    Hi
    My macbook has started getting really hot after using it for only maybe 10 minutes or so, it can go up to 73 degrees quite quickly, I am only surfing the net etc but have a few pages open at the same time.
    Also should I switch it off after I finish using it or is it ok to leave it in sleep mode for long periods of time......
    it is about 1 year old
    thanks

    First try a SMC reset:
    http://support.apple.com/kb/ht3964
    If there is no change, install istat menus:
    http://bjango.com/mac/istatmenus/
    Open Activity Monitor to ALL PROCESSES and %CPU to display values from high to low.
    Look for a process that consumes a large % of CPU.
    You may post images of both for inspection.
    Ciao.

  • After Lightroom CC update, PS & Bridge fail to update and get error U43M1D204.  Retried for two days still same error.

    After installing the lightroom CC update, PS and Bridge reported they had updates.  When trying to update I get the error U43M1D204 and it fails.  Retried for two days now and still cannot get it to work.  Tried removing PS and Bridge but there is no uninstall or reinstall options.

    UPDATE:  I managed to get both uninstalled and they re-installed ok.  They reported installing ok but required a patch and that failed.  So back to the same issue, I cannot patch these two applications.
    Forgot to add details:
    Macbook Pro 13" (Late 2014)
    Up to date Mac OS X Yosemite
    Up to date Creative Cloud

  • TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

    My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

    Eek.  Sounds like something in the app caused some serious software issues.  You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

  • After using CS6 for a year, I suddenly get a message that my serial is invalid.

    In November 2013 I purchased the Adobe CS6 Master Collection for educational purposes. After using it for a year without any problems I suddenly got the message that my serial is invalid.
    I already checked the host file, uninstalled the update manager and tried installing the software on a clean computer with the original DVD. Since I'm unable to contact costumer service by phone (finally hung up after 2 hours of waiting) and since the online chat is unavailable, I'll try it via the forums. Please help me.

    Hi Markus, thanks for your post.
    I tried what you suggested, but it failed. I first got a massage that deleting was failed, then I tried using the cleaning tool. At first the tool found something, what I deleted, but it came back. I restarted several times, closed all browsers, etc. Now the cleaning tools won't find anything but it still didn't solve the problem.
    The only thing I didn't do was:
    In a text editor, such as TextEdit, open /Users/[user name]/Adobe Creative Cloud Cleaner Tool.log.
    Review the log file entries. If any of the entries indicate failure, contact us. 
    I tried, but couldn't find the file...
    Elly

Maybe you are looking for

  • Oracle 9iAS 9.0.2.1

    I have installed the software for Oracle 9iAS 9.0.2.1, i need to configure the same. I am searching for : 1. any guide that will help me do the same (Oracle 9iAS Administration Guide) and 2. Any Configuration Assistant tool. So that i can deploy my a

  • Can i roll forward cold backup taken using os command

    i have cold backup of db which is in archivelog mode ( backup taken using os level cp command ) and arch logs from after backup was taken. can i restore db and rollforward using the archive logs?

  • I can't get past a log in screen on a 10.4.11 iMac.  Help!

    We have a number of new staff members at our school.  one of them wants to use a 10.4.11 imac that is connected to a Promethean board.  The computer has a generic login screen that no one knows the verification information for.  I created the new use

  • IPhone Turn on automatically  after i turn it off

    I have an iPhone 4s with iOS 7.1.1. Each time I turn it on after few seconds it starts turn on again. If it is being chraged  then it keeps turned off but as soon as I disconnect it, it turns on again

  • Mesure de fréquence avec NI usb 6210

    Bonjour, Je viens de faire l'acquisition d'une carte NI USB 6210, je cherche à recupérer la fréquence de mon signal alternatif 50hz, mais je n'y arrive pas. J'ai cabler en entré de l'entrée PFI1 in et DGND mes deux fils conducteur, et ensuite sur Lab