I'm new at this stuff

How can I put a part of my movie in the beginning of the movie and still keep it where it is in the movie? Yes I want to add one little part of the movie at the start, but keep that same part still in the movie where it is, how can I do that?

Same as you do with anything: click on the clip, copy, paste.

Similar Messages

I cannot remember my restriction pass code, and I don't know how to retrieve it. Can someone help me, I'm new to this stuff!!

I set a restriction pass code, and when I tried to use it, it says it's wrong. But I had to put it in 2x so it can't be wrong. And I just set it this morning, so I didn't forget. It just won't let me in.

iOS: Forgotten passcode or device disabled after entering wrong passcode - http://support.apple.com/kb/ht1212 - Learn what to do if you have forgotten or can't remember your passcode, or if your device displays a message saying it is disabled.
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

I cant download flash player...i am new to this stuff.

hello there, I have been trying to watch videos online...my computer wont let me.
to make this short, I have IE 9. 32bit. windows vista. I unistalled adobe 9.0...because my computer wouldn't let me update it.
now when i try to install adobe 10 i get this error code at the end of its downloading.
     " http:/get.adobe.com/flashplayer/completion/aih/?exitcode=0 "
     then below that it says this....
    " This file does not have a program associated with it for preforming
       this action. create an association in the Associations control panel. "
what does this mean? How do I fix this? send me a private message so we can figure this out.
Thanks,
Dale

Download the installer from the link in http://forums.adobe.com/thread/889580 and save it to disk. Close all browser windows, then run the downloaded installer.

HT4623 HELLO I WISH TO GET A up date to down programs on my 3g i phone please help i am very new at this stuff

I have a 3g phone and I need to update it to download the old and new programs on the phone
It's says I i need a i OS 5 or 6

The iPhone 3G is obsolete. It can not run anything higher than iOS 4.2.1. There are some old apps in the app store that will still run on it, but most newer apps will not.

New to this stuff!!

Like the idea of airport extreme but can i really connect to any speakers in home wirelessly? does it need to be digital system (i.e can i wirelessly listen on oldish bed-side radio, dvd etc like an i-trip?) Use i-trip just now but need to get with the 2010s! help, chrimbo on way, party booked, dung sounds

You need an Airport Express to connect to speakers. Apple only supports using iTunes, however there is a program called Airfoil that will play just about any sound from your computer.

Dumb question but I'm new to this

Hello all, what is the difference between saving a song as a song or project,,what is the benefit if any of saving it as a song?,, stupid question i know but i'm new to this stuff-- thanks!

1. There are very few times when saving as a song would be prefered (making a backup or template maybe). When you open a new song, save it as a project the first time. After that, you can just hit "save".
2. You should delete any audio you don't need from the Audio window. If you just delete it from the Arrange view, it's really not deleted, the regions are just removed. It's best not to delete audio from the Finder either, but to use the Audio window. In the Audio window there's an option Edit > Select Unused that shows which regions and files are not being used. Then select Audio File > Delete File(s).
Dual 2.5Ghz 2004; 2.5GB RAM Mac OS X (10.4.8)

I can't open my imovie '9 projects on my new lap top which uses imovie 11'.. previous lap top was mac book osx 10.5.8.. new one is mac book pro 10.6.6.. any help out there! i'm pretty useless at this stuff, might be really simple???

which uses imovie 11'.. previous lap top was mac book osx 10.5.8.. new one is mac book pro 10.6.6.. any help out there! i'm pretty useless at this stuff, might be really simple???

Thanks for nothing, as usual, Apple.
I had to redo the whole project from scratch on Windows Movie Maker.
Now I know which brand to trust on my next purchase.

I want to make a bootable usb drive for my macbook air,and my ystem is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things

I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
Message was edited by: tzaphon

This is not difficult and you will not have to download from the app store.
your computer has what is called a recovery partition that came with it.
simply hold cmd+R while you boot up. let go a second after you hear the chime.
you will boot into the recovery partition.
Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
it will ask you which disk you want to install ML onto. Choose your new USB drive.
easy peasy

I am new to this. How do I get my movie from my computer to the tv. I have apple tv. I am really dumb when it comes to this stuff.

I am new to this. How do I get my movie from my computer to the tv. I also have apple tv.

In iTunes turn on homesharing.
On your ATV turn on homesharing.
The ATV should then see your computer as long as you enter the same id on both machines.
Your content should then appear under the computer setting on the ATV, then watch away...

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

This stuff sucks!!! everything about it jus plain out sucks!!! google you are NOT!!!!

== Issue
==
I have another kind of problem with Firefox
== Description
==
This ''stuff'' just SUCKS!!!! NOTHING WORKS. BRING BACK THE OLD VERSION. CHROME IT IS NOT, NOT EVEN CLOSE.
<blockquote>edited due to offensive language - eh</blockquote>
== This happened
==
Every time Firefox opened
== WITH THE NEW VERSION
==
== Troubleshooting information
==
THIS JUST PLAIN OUT SUCKS
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 GTB7.0
== Plugins installed
==
*-npmnqmp 071303000006
*npunagi2
*Zylom Plugin
*Adobe PDF Plug-In For Firefox and Netscape
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Shockwave Flash 10.1 r53
*DivX Web Player version 2.0.2.40
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*Allows browsing on RealArcade sites with Mozilla browsers.
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Unity Player 2.5.0f5
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Could you please tell us your problem and we will resolve it for you.

Just trying to get this stuff to show up!

Hi
Do the includes need to be in a certain place? When i test
the webpages i've made with spry on my local machine, they have no
problem working correctly. When I upload them to the server (and
make sure that all the files are uploaded) --- it doesn't seem to
pull the data in.
here's the site link...
http://www.studio-rasa.com/Store/Store_View_All3.html
I'm pretty new at this and probably have made a really
obvious mistake - any help welcome. I'm thinking maybe i'm jumping
in to this spry stuff to early - or maybe it's not for me!
thanks!

Most servers are case sensitive when it comes to file names.
You have to make sure you include "SpryData.js" instead of
"sprydata.js".
I see this in your file:
<script type="text/javascript"
src="includes/sprydata.js"></script>
--== Kin ==--

I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help

I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help...

We are starting from the beginning like its a new ipod starts out asking language, country,location services,choose a network,and when we get to "setup ipod touch " there are 3 options 1..setup as new ipod, 2.restore from ipod backup 3 restore from itunes backup and when we hit setup as new ipod and click next it comes up with sign in with apple id or create a free apple id we clicked create a free apple id....then comes up with bday,1st name last name, use your current email address, get a free icloud email address or change email address and THIS is where we have problems....if we hit change email address it means that sis's stuff goes under his name and moves all her stuff to this older ipod which the brother does not want. sorry this is so long but its the only way I knew to do it.

I love the new form generation stuff in FB, but some problem here

I love the new form generation stuff in FB and I've created a form from a create autogenerated service.
When the user fills in the form I call the method I assign it to a token in a call responder
        createtbMysteryShopperResultsResult2.token = tbMysteryShopperResultsService.createtbMysteryShopperResults(tbMysteryShopperRe sults2);
The service just a void one
However if the users fills the form again and called the same service I get an error:
Item with id 'tbMysteryShopperResultsRPCDataManager:#:0' already exists. Error on destination 'tbMysteryShopperResultsRPCDataManager'
The primary key column is auto incremented in the ms sql database so I do not understand this error?
Any advice would be great, this problem has been bugging me for days now
A lot of the code generated stuff I don't understand so I don't know where to look for errors

Sorry for the late response, but I think I've found a workaround, I encounter exactly the same trouble in my application, very rare trouble but more often when the application runs on touch screen. I think It's like the user double-click on the button firing the action of create item twice, in my case it should not arised because i remove the button on click but ... sometimes it seems it should :-/ By default the RemoteObject wrapps in the DataService is in multiple mode , see concurrency in RemoteObject source :
    [Inspectable(enumeration="multiple,single,last", defaultValue="multiple", category="General")]
    * Value that indicates how to handle multiple calls to the same service. The default
    * value is multiple. The following values are permitted:
    * <ul>
    * <li>multiple - Existing requests are not cancelled, and the developer is
    * responsible for ensuring the consistency of returned data by carefully
    * managing the event stream. This is the default.</li>
    * <li>single - Making only one request at a time is allowed on the method; additional requests made
    * while a request is outstanding are immediately faulted on the client and are not sent to the server.</li>
    * <li>last - Making a request causes the client to ignore a result or fault for any current outstanding request.
    * Only the result or fault for the most recent request will be dispatched on the client.
    * This may simplify event handling in the client application, but care should be taken to only use
    * this mode when results or faults for requests may be safely ignored.</li>
    * </ul>
Then I add a test in my code and the problem seems to disappear :
                            if ( createPersonResult.token == null )
                                createPersonResult.token = personService.createPerson(person);
HTH,
Stephane

Does new Thread(this) work for a Frame class?

package MThreads;
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
public class ThreadFrame extends Frame implements Runnable
{   Button btnNew = new Button("New");
Thread aThread = null;
public ThreadFrame()
{ /* nothing in here */}
public void run()
{ /** does stuff */ }
btnNew.addMouseListener(new MouseAdapter()
{ public void mouseClicked(MouseEvent e)
     { aThread = new Thread(this);
     aThread.start();
The line aThread = new Thread(this); does not compile.
error is "can't convert MThreads.ThreadFrame.1 to java.lang.String"
Anyone got a clue??
Thanks
Nancy

You've just created an anonymous inner class new MouseAdapter. "this" now points to an instance of MouseAdapter and not Frame as you think.
package MThreads;
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
public class ThreadFrame extends Frame
     implements Runnable {
     Button btnNew = new Button("New");
     Thread aThread = null;
     final Runnable frame;
     public ThreadFrame() {
          frame = this;
     public void run() {
          btnNew.addMouseListener(new MouseAdapter() {
               public void mouseClicked(MouseEvent e) {
                    aThread = new Thread(frame);
                    aThread.start();
}Hope this helps you.
Hjembaek

I'm new at this stuff

Similar Messages

Maybe you are looking for