I'm new here, serious help needed plea

Hi everyone!
For months now i have been experiencing problems with the sound on my computer and at first it was only every so often that the sound would skip / jump here and there whilst i was doing simple things like listening to music or watching videos on the internet. But it became gradually more frequent until last week when all sounds (including windows ones such as the start up tone) were skipping, and i decided to take action!
I was reading instructions on how to fix some sound problemsand tried to install new driver updates for my sound card (Sound Blaster PCI28). i was prompted to reboot, which i did, but then i was asked to insert the 'Windows Millenium Edition' disc, which i do not have! (the PC came with everything already installed by Tiny so we don't have any of those kinds of discs). So i skipped the two files from the disc and since then the sound has gone completely, and i fear that i may have deleted / uninstalled the sound card! All i can hear now is a fuzzy noise from the speakers all the time, and when you would usually here the sound clearly, it can only be heard extremely faintly and is drowned out by the fuzziness!
I am at the end of my tether and don't know what else to do!
Please help!
thelemonfairy :womansad:

Hi
Some more information might help addressing the problem you're having.
Is your PC made by IBM/Dell/Compaq/HP or any other known manufacturer?
Can you tell the exact type number for your sound card (like SB0200).
.jtpMessage Edited by jutapa on 04-05-2005 0:2 AM

Similar Messages

Serious help needed fixing an image gallery

On my page
http://www.dorff.nl/clients.html
ive put this very nice gallery..
The only problem is. I divided the gallery in 6 groups. But in every group you will see the same images. How can i change the images for each group seperately?
I hope you understand what i ment.
Regards Brian

How i can use the four files you have send me?
In dreamweaver im getting the message...
lightbox.css is not on the disk
prototype.css is not on the disk
scriptaculous.css is not on the disk
lightbox.js is not on the disk
Date: Thu, 12 Apr 2012 12:37:39 -0600
From: [email protected]
To: [email protected]
Subject: serious help needed fixing an image gallery
    Re: serious help needed fixing an image gallery
    created by adninjastrator in Dreamweaver - View the full discussion
Here are 4 files you need:http://www.olympicdiscoverytrail.com/style_sheets/lightbox.csshttp://www.olympicdiscoveryt rail.com/style_sheets/prototype.jshttp://www.olympicdiscoverytrail.com/style_sheets/script aculous.js?loa d=effectshttp://www.olympicdiscoverytrail.com/style_sheets/lightbox.jsHere is an entire web page with working multiple galleries:
Photo Gallery 1
    !images/125/paw_Carrie-Elwha.jpg|title=Elwha River Valley approaching the bridge|height=93|alt=Elwha River Valley approaching the bridge|width=125|src=images/125/paw_Carrie-Elwha.jpg|border=0!
Photo Gallery 2
    !images/125/sw_IMG_1115-Downtown-Trail.jpg|title=Trail near High School close to downtown Sequim|height=83|alt=Trail near High School close to downtown Sequim|width=125|src=images/125/sw_IMG_1115-Downtown-Trail.jpg|border=0!
   </div>     
</div>
</body>
</html>Here is a link to that working page on-line:http://www.olympicdiscoverytrail.com/trail_maps/slideshow.htmlThere is not much more I can do!You'll have to take the bull by the horns and start coding!Copy/Paste this HTML code into a new, blank page and edit the paths to all the .css, .js, and image files.Best of luck!Adninjastrator
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4330648#4330648
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4330648#4330648. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am new here ,please help me.....

i am from China, so i am poor in english ,i will try my best to describ my question.
I booked a iphone4s from app store web of Canada,and I was charged 738 CAD from my credit card including the fax , and then i canceled my order, Why not return the money in my account. and should i still pay the fax fee? please give me a tip.thx.
sorry for my poor english, sorry

There is no one from Apple here, thus no one here can help you. You need to contact Apple directly. Contact info is on the web site where you originally ordered your phone.

SERIOUS HELP NEEDED!!!

Hi, My 5th gen ipod has somehow lost all of its songs. After pluggin it into the computer and taking it out all is gone. This is the second time that it has happened. Now when I tyr to reset it the latest updater says that the ipod is in use, but nothing is open. I need serious help I can nto do anythign with my Ipod now when I try and press it it says the website of apple.com/support/ipod. Thanks so much!

What is it showing you above the apple.com/support/ipod...
an exclamation folder error, or a sad ipod icon. Check out this article
http://docs.info.apple.com/article.html?artnum=61711
You might want to try opening ipod updater before connecting the ipod.
Let me know,
Matthew

Serious HELP needed, on Airport Extreme

Hi.
I was wondering if anyone here could help me out, the thing I was looking, for is there any application where I can view the people who are connecting to my base station?
I know you can put a password on it, but I just want a application where I can either accept or decline somebody, and view there name or something...
+(I can't put a password on anyway as I have family that use the network connection in my house, and there on Windows machines, that can't connect when I have a password on for some reason...!)+
If anyone can help, please do, I'd really appreciate it.

It sounds like you attempted to use WEP for your wireless network encryption. You should use WPA, as WEP is no longer considered secure, but if you need to use WEP to support older devices, you need to know that one of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa.
You may find the following articles helpful:
o Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
o Apple article, especially the part about "Third-party client to Airport".

New to Java: Help Needed

Hi,
I am writing a utility to monitor all the objects created by my application. I want to be able to get not only values of class variables(for which the reflection package seems pretty useful), but also instance variables.
For example.
public class myClass {
//Constructor
public myClass(int i) {
// another class instantiates this one
myClass mc = new myClass(10);
myClass mc1 = new myClass(20);
I need to keep track of the the handles mc and mc1 and the
other initializations they do based on the value passed at runtime.
Is there a way to to this. Or even better, is there someplace in Java which stores all the objects instantiated and their handles?
Any suggestions would be greatly appreciated.
Thnx
cvsan

How do I access private and proteced variables. By default only the public variables are accessible via the reflect class as in the example below.
Class c = rc.getClass();
String s = c.getName();
System.out.println(s);
try { abcField = c.getField("abc");
where abc is a public instance variable. If abc is a private instance variable, the above example fails.
Is there any way to override the data hiding feature of Java?
Thanks
cvsan

New here but in need of a bit of help....

Good evening,
my problem is basically the amount of duplicates i have in my library and the fact that i am unable to delete them properly. My whole library seems to be duplicated at least once sometimes twice.... and i was hoping there might be a program or technique to organise the library instead of going through the whole thing one by one?
After owning a 1st gen Nano for many years i have just purchased a touch and want to get it loaded up. However after a hard drive crash and then a recovery disc upload, another nano being synced etc etc my library is a real jumble!
please help! many thanks, ben

Do you know about the Show Duplicates feature?
Also, sorting by the Date Added will often group things together, for instance if you dragged a whole folder into itunes one day and it made many of the duplicates happen - they will all be grouped together for easier deletion
More info:
http://support.apple.com/kb/ht1417

New video editing pc.. will this work ? i'm new here, please help me out

hi everybody my name is mark, . i really hope i write and express myself correctly
first of all i'd like to say i love this forum. there are some brilliant ppl here with great advice.
special props to Mr Harm Millaard.. wow u know sum serious s*** !
i'm a pro musician my thing has always been protools, recording production etc. its time for me to get into video using adobe premiere pro
mostly i'll be doing my own music vids for my solo projects and for my band as well as professionally done as possible. i'm a nebie at all things video but i'm totally obsessive when it come to creative projects. it helps with the learning curve (:
this is my courant rig setup
http://http://www.newegg.com/Product/Product.aspx?Item=N82E16813131405
http://CPU INTEL|CORE I5 750 2.66G R
http://MEM 4Gx2|GSKILL F3-10666CL9D-8GBRL
3 Wd hd's 160 500 and 640 gb's
2 monitors 22' hanns g and a 19 "something
i believe a 400 or 450 w powersupply
stock vidow card
2 cd/dvd
i think that covers the basics
AFTER OVER A WEEK OF RESEARCHING AND NO SLEEP THIS IS WHAT I CAME UP WITH FOR MY NEW RIG
http://ASUS P6X58D Premium LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
http://Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor BX80601950
http://G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9T-12GBRL
http://HITACHI Deskstar 7K3000 HDS723020BLA642 (0f12115) 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
http://Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
http://EVGA 012-P3-1470-AR GeForce GTX 470 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
http://Thermaltake Black Widow W0319RU 850W ATX 12V v2.3, EPS 12V v2.91 CrossFire Certified 80 PLUS BRONZE Certified Modular Active PFC
http://Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
total 1,399.92 i'm pretty much at my budget max
will this setup be able to handle both my protools and adobe premier cs5? am i missing something ?
what would be the best HD set up wise for max audio/video performance ? i was thinking a dual boot ?
with 2 new hd's i'll have 5 all told.
3 for video... 150 veloci raptor 2tb Hitachi and WD 640
..2 for protools... the wd 160 and the WD 500
i guess i'm looking for the best way to set up my rig for max audio/video performance and pass the information on to my cuz who's in the pc building biz his thing is gaming not so much video editing.
i really hope i wrote this out correctly so everybody can understand what i'm trying to say and will be able to give me the proper guidance i need
let the suggestions begin
thank u for your time
Message was edited by: iammajick

thanks for your support guys. it now looks like i'm changing up my rig again. looks like were going to be going with a RAID set up
3 x http://Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 http://Western Digital Caviar Black WD6401AALS 640GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive which i already have on the rig i'm using
my cousin gino orffitelli who's mainly a gamer builder for his company ePro had this to say in an email to me last nite.. he gave kool props to the adobe forums
'finally had a few min read through your email and skim the links you made in adobe'.....'as far as storage is concerend i believe the mobo's your looking at support RAID and from what i read thanks to your links, RAID 5 offers the best performance and saftey which means 4 HDD's.....' with the knowlege base your building and contacts u have you and i may just open a new direction for ePRO'.....
i try my hardest to understand RAID but since i'm a novice with computers its really hard for me to grasp it...http://forums.adobe.com/thread/525263
my brain is in overload insane trying to process all this (:
so guys... RAID 5 with the rest of the hardware i'll be using ?
like i said i'd like to have the max performance for my audio/vidio rig.
thanks again guys
mark

Serious help needed with icloud restore

Hey guys and ladies, i am in a serious state of confusion.
firstly with my old email address i was getting alot of spam and fake emails, so i changed my email address, and i updated my apple id to this as well. all going well, and then i decided to get an iphone 5.
i was using iphone 4s and backup my photos and apps to icloud so i could restore it to my new iphone 5 today.
well that hasnt worked out great. its still asking for my old account/apple id password and even the senior level of applecare support cant figure it out either.
i have lots of important family photos sitting in the icloud that i truly dont want to lose. when i reset and try again still asks for the old and new logins.
been a nightmare today.
any help or tips would be great.

Since the email address is no longer active you'll need help from iTunes store support to reset the password. (Even though this is an iCloud account, they deal with Apple ID issues all the time.) Suggest you contact them here, explain that you are trying to access your iCloud backup but it isn't accepting your Apple ID password and you are unable to reset it because the primary email address associated with the account is no longer active and need their assistance: http://www.apple.com/emea/support/itunes/contact.html.

Pdf showed in new window. Help needed!

Hi all,
This is my first post (but a thousand read), and i want first to thank you all for all the information i have read in this forums for years.
I have a problem which is giving me more problems that i expected. In my webapp, i want to show a pdf document in a new page of the navigator when a button is pressed. I have discarded the target blank option in the container form because i have others buttons and dont want them to be opened in new windows, just the one that open the pdf.
So, I used another navigation rule to open a new window. This page have to make de pdf in code an send it to the client. I dont know how to execute that code on the load of the page.
The solution i am trying is using a poll that only will be called once and in the pollListener execute that code. The problem is that does not work to send the response to the client in the client. Here is the code of the pollListener:
byte[] file; //Don't worry about it. Contains the file pdf i want to show.
FacesContext fctx = FacesContext.getCurrentInstance();
HttpServletResponse response =
(HttpServletResponse) fctx.getExternalContext().getResponse();
response.setContentType("application/pdf");
response.setHeader("Content-Disposition",
"inline; filename=\"file.pdf\"");
response.setHeader("Cache-Control", "no-cache");
response.setContentLength(file.length);
ServletOutputStream sos = response.getOutputStream();
sos.write(fichero);
sos.flush();
sos.close();
fctx.responseComplete();
The curious thing is that if i change the content-disposition to atachemement instead inline, it works asking me to download the file, however, i want it to open directly in the new window and is because of that i use content-disposition inline.
I am almost killing myself because of this problem. Anyone can help me?
Thanks in advance!

First of all, you don't need to do this with a workaround using a Poll listener. I assume that one page has a commandButton or commandLink that is used to show the PDF, right?
Set the useWindow property of the button or link to "true".
Set the actionListener property of the button or link to a method in a backing bean that looks something like this:
    public void showPDF(ActionEvent actionEvent) throws IOException {
        //Setup the output
        String contentType = "application/pdf";
        FacesContext fc = FacesContext.getCurrentInstance();
        HttpServletResponse response =
            (HttpServletResponse)fc.getExternalContext().getResponse();
        /* Notice that I don't set the Content-Disposition header - inline is default. */
        response.setContentType(contentType);
        ServletOuputStream out = response.getOutputStream();
        /* Do whatever you need to do to write the pdf to "out" here. */
        out.flush();
        out.close();
        fc.responseComplete();
    }

WRT160N Version 3; SERIOUS HELP NEEDED FOR SETUP PLZ??!?!?!

I bought this router probably around 3 weeks ago.
The following is a list of chronological scenarios that i have tried in order to install it and everything during the first week that i got it:
1. I followed the CD's instructions, got LELA, but then when i used LELA to 'add another computer' it just gave an error, and then after this i could not be screwed using LELA anymore and so i uninstalled it, and then went online to 192.168.1.1 to configure the settings of the router, SSID, password and security which i put was WPA2 etc.
BUT THIS DID not work at all, i have 2 laptops, 1 of them which is new, and the other which was a couple of years old, they could not detect anything.
2. I then did some internet research, and read on these forums that i needed to change some of its advanced wireless settings, i did that. And then I could actually connect......and was extremely happy at this moment, BUT the next day i noticed, that even though i was about a metre away from the router, my speed was varying BADLY, initially when i first connect with my new laptop which has a Intel Wifi 5100AGN adapter it has a speed of 144mbps, but when i open internet explorer, i see the speed going slower and slower, until it is 1mbps, and sometimes the wireless just cuts out. This happened to my other laptop as well.
3. I then called for technical assistance, spent so much time talking trying to solve, and downloaded the latest firmware, reflashed the router, but still it has this problem of slowing speeds which is really frustrating.
And doing some more talking and following more instructions from the person on the phone, both my laptops could not connect to the router, even though it can see it at 'Excellent' connectivity.
4. And so, the person on the phone concluded that i should exchange the router with new one, which i am planning to do, and will probably get it tomorrow. But i am also thinking to myself whether or not to get a different one.
SOME NOTES:
-When it is wired the internet works fine
-the adapter in the older laptop is a intel 2200BG, so i know that it would probably go at a max speed of 54mbps
-when i said changing advanced wireless settings, i meant changing frequency/RTS/beacon levels etc to the values i have seen on these fourms.
CURRENTLY, since i am exchanging i have gone back to the old ASUS router which is G. and it connects well with the old laptop with a constant speed of 54mbps, but havent tried the new laptop as i can not be bothered. Also my main reason of getting a N router is just for range, because with the current one, i just cannot detect the router when i am in my bedroom, which is less than 20m, even if i can detect it is is very poor connectivity, WHERE AS with the WRT160n before i exchanged it, i could detect at first with Excellent connectivity, but as i said, the problems with speed and wireless cutting out etc is what results from this router.
I guess my main point is that, i want to ask any of you have used the VERSION 3 of WRT160N, and is currently working very well wirelessly. Can u please tell me the step-by-step instructions to help me set this router perfectly?
regards

Try updating both of your laptops wireless cards that could fix the problem (you know may not be compatible with your WRT160N).
I know you said you changed the channel your router broadcasting in but do you have a lot of other wireless networks in your area???
GoodLuck
Matt

New to muse, help needed

first off i would like to say that when i selected a community to post into there wasnt one for muse so i chose dreamweaver.
i have been creating a site for my real estate company in spain, i started by using dreamweaver having problems adjusting to the code. i was tipped to use muse as no coding is required.
i have been following the tutorials at lynda.com on how to create a site with muse. the tutorials are excellent by the way and i fully recommend them!
i have a website up and running at www.casanerja.eu5.org. ill run you through the site and what i think is wrong with it. the stuff i think is wrong i need a tutorial in how to change if you guys can give one.
first off the index page. you will notice that if you hover over the countries and flags they light up. i want them to be in sync with their flag so if you hover over the word 'welcome' the english flag also lights up. at the moment i have set the word 'welcome' and the flag to stay bright as this will indicate to the user they are viewing in english. i haven't got the other languages setup yet but eventually ill redo each page in the 3 extra languages and link them up.
second is the search page. there isnt anything here as i want to set up a complex form that will let the users set their preferences on what property they would like, once they click submit the page will then look through the companies database and will show the properties that are relevant. what is this form called that i want to make and how do you make it? also my company has no database at the moment so i will have to create one, i suppose i can create a database with microsoft access.
third is the about page. when you scroll down i have set the logo and nav bar to always stay at the top. the problem here is that when it goes over text i can still see the under text as well as the logo. how can i get them to stay on top so you will not see anything it scroll over.
forth is the contact page. again i have the same problem with the scrolling. i also have a problem setting google maps to show my location 'casa nerja' in a zoomed view, i have managed to enter in the address 'Casa Nerja, Nerja', this gives the map that shows at the moment and I have zoomed in enough to see my company positioned at the bottom of the map. how can i tell google maps to be more specific in showing my company location.
the last page is the links and media page. apart from the scrolling problem i have no other changes i want to make to this page.
how can i set my logo to fade in on page refresh?
is there an easier way for me to translate each page or do i just have to change them individually?
sorry this is such a long post but i hope i get some help here.
thanks
james

There's a Muse forum, it's the last one listed on the Adobe Forums page at http://www.adobe.com/forums, it's right here: Help with using Adobe Muse CC

New here, please help

Hello all. I just bought the creative webcam for notebook. the video is fine, but does anyone know how to turn on the audio? do I need additional codecs? the package came with a headset as well. what should i plug into what on the laptop? thanks.

Hello bilal_javed,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are trying to connect your computer to another device. You have not specified if you are trying to connect to a Game System or to a TV Tuner. I am providing you with the User Guide, where on page 20 it explains how to connect to a TV Tuner or Game System.
Please review the instructions provided and re-post if you require additional support. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Nomad MuVo2 4.0gb----HELP needed (plea

My 9 year old daughter received this mp3 player last year for christmas and I was wondering if there are any speaker systems or docking stations that go with it's Also, I am thinking about getting her a home shelf stereo system for christmas this year--can you some how hook the Nomad MuVo 4.0 up to it's If so, are there special cables needed?
Thank you for your help---I am slowly learning about this electronic stuff!!!

Jason,
Thanks so much for replying. I was just thinking of buying my daughter some kind of stereo system around $00 for christmas. I just want to make sure that she will be able to hook up her Nomad and listen to the songs that she has on the nomad thru the stereo. I have no clue as to which system I will be buying but if you could tell me what I need to look for, that would be great. Audio in? Audio out? Got me!!
!! Any idea if Creative will be coming out with a docking station for this mp3 player?
Thanks again and Happy Thanksgiving,

New smartphone user - help needed with 520

I hope my issues are easy to solve. I have a gmail account and I want to download apps from Microsoft. Seems simple enough. But I cannot set up my gmail account and am totally befuddled. I look up Microsoft accounts and there are several. I went into Microsoft's outlook.com and set up an account @live.com.
When I try to sign into that account to download apps I get the error code FFFFFE70.
Please help me understand what I need to do to easily created accounts to post here, download apps from Microsoft, and have my email from gmail come to my phone

If there's an issue with the Microsoft account I guess best woudl be to contact their support line HERE.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

I'm new here, serious help needed plea

Similar Messages

Maybe you are looking for