I'm new to I-phones. Got one and guess I synced my hotmail account. Since then changed my hotmail password once and my i-phone locked until the new password was entered. Worked fine. Had to change my password again-won't accept it - locked phone-help!
I'll warn you I amd not I-phone savy at all...I don't know which I phone I have and am not near it at the moment to see what it says on the cover..got it in the fall of 2011. I guess I must have synced hot mail with it and now it's locked and I can't use my phone at all. I've reentered numerous times making sure that caps are caps, etc. Will attempt to reset hotmail password again and see if a new one will work. I was able to do this one time.
If you have set up an iCloud account you will see Delet Account at the bottom (see image below). If you don't, you haven't set up iCloud.
Similar Messages
-
Seems simple right? Hook up to a computer and restore and bypass disable screen? NOPE. Everytime I tried to connect it to iTunes it gives me a lovely message that says something to the effect of " cannot sync to itunes because passcode needs to be entered on iPad" but the iPad mini says it is disabled so I am getting the total run around from this devil spawned tech.
I tried to also restore it in recovery mode like someone suggested but it still said the same thing. The person said if I followed instructions it would not do that. Well, it did. Here is exactly what I did:
Itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". and the iPad mini has the itunes logo with the USB cord and an arrow on it on the screen. I clciked ok on the computer to shut that message off.
On iTunes it says "Ipad recovery mode. Your software is up to date. Click check for updatr to see if new software is available." The check fo update button is grayed out and the Restore iPad button is available to click. I click on "restore iPad" and a pop up says "Are you sure you want to restore the ipad to its factory settings? All of your media and other data will be erased, and the newest version of the ipad software installed. Itunes will verify the restore with Apple. After this prcess is complete, you will have the option to restore your contact, calendars, text messages, and other settings."
I clicked on "restore and update" and it shows a box with software update 7.0.4 and I click on next. I accept the user agreement and it starts to download the ipad software update.
I wait for the update to install and as I am waiting a box pops up that says "itunes could not connect to the ipad because it is locked with a passcde. You must enter your passcode on the ipad before it can be used with itunes" and it gives me the option to click more information, try again, and cancel.
So what do I do now?Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
If you cannot manage any of the above then:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
SPSS working fine, had some disk problems, now it won't open.
I have a limited license SPSS statistics standard grad pack 21 that was running on snow leopard on an old Macbook Pro just fine untill my computer crashed.
When I say it crashed I mean I got the beachball of death and I rebooted it and it couldn't find the disk. So I then started it up while pressing the option key and got it find the disk, then repeatedly got the beachball of death when I tried to do anything (such as a backup) and kept warm rebooting it out of frustration until it couldn't get past the login window. Plugged it into my mac mini in target disk mode and tried to run a repair, couldn't get it to unmount, my Dad remotely logged on and went into terminal and after a while he got it to unmount and run a disk repair and then it booted up fine.
But now when I try to open SPSS it bounces on the dock for a half a second and then won't open. I have tried uninstalling and reinstalling it a multiple times and I'm still having the same symptoms. Java is up to date.
All my other applications are working fine besides SPSS. I don't think the version 21 that you BUY runs on snow leopard, but this student rental version is supposed to and it did before I had the crash.
I DID initially install it on a standard user instead of an admin, but have since reinstalled in on an admin and still same symptom. Tried to create a new admin user and open it on there and still the same symptom.
Need this stupid app for school. Have no idea what else to try.
Any ideas?Firefox 16.0.2 is the last version that works on an Intel Mac with the OS X 10.5 operating system.
* http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/16.0.2/mac/
Another possibility is to install the Firefox 10.0.12esr (BuildID=20130103094221) version that has more security updates, but misses features present in Firefox 16 (BuildID=20121024073032).
* http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/10.0.12esr/mac/
* http://www.mozilla.org/en-US/firefox/10.0.12/system-requirements/ -
Yesterday afternoon I was suddenly bombarded with literally masses of viruses, and since then my firefox has become completely unresponsive. There is an error message stating that "netlkr.dll was not found," and I have no idea whatsoever what exactly that means. I would very much appreciate some help here. I have also already tried numerous times trying to uninstall and re-install firefox, but to no aveil. Nothing I have tried for a solid day now has done any good. Please help!
== This happened ==
Every time Firefox opened
== Yesterday afternoon ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; GTB6.3; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
-
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
Question
I can no longer send or respond to email from my Firefox browser. I closed and sent from Internet explorer and it works fine. What changed? The only thing different this morning, I downloaded Adobe uprade?I had this hotmail issue myself a while back. I Googled, scanned MS website, scanned MSN website, visited forums, couldn't figure it out. I tried Firefox and Opera and even changed the Opera mask setting from Opera to Internet Explorer. Nothing worked. My best guess was that I was signing on (with the new MSN Live as opposed to MSN Hotmail - the OLD interface) with the "Remember me on this computer?" box checked. I now make sure it is un-checked (which is not the default) and hotmail lets me in.
Not exactly sure if that is the real remedy, but thot I'd throw the story your way just in case... -
MY pages documents on my ipad wont sync to icloud. Some of the documents have had the upload icon on them for over a month. It was all working fine a month or so ago but I cant figure out why it wont work now.
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution
No it's not true. It's one big practical joke being played on you by Apple.
-
I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!
This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer. -
I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help
If you want a short list of third party repair options, here you go.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/ -
Dear Team,
Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type. Could you please do needful. Thank youHello,
most recent patches for IGS and kernel installed. Now it works. -
I changed my appleID but iCloud is still using the old one and no place to change it. How do I get iCloud to update to the new ID?
You have to sign out completely and then sign back in.
On a Mac, System Preferences>iCloud and click 'Sign out'.
On an iOS device, Settings>iCloud and click 'Delete account' (this will not delete the account from the server).
Your synced data will disappear from your devices when you sign out, but reappear when you sign back in (give it time). -
hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help
Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
Maybe you are looking for
-
Mini display port to HDMI - negative picture issue
I bought a new Macbook Pro 13,3 inch laptop last week and added a 120 GB ssd and 8 GB of RAM. I'm loving it! Something I'm not loving however is the issue with the Mini Display Port / Thunderbolt when connecting with a MDP-HDMI adaptor. I watch a lot
-
Working with 100+ 4 second .MEG files. I've been getting this error message when WATCHING the clips in the timeline: Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will atempt to save your current project.
-
any help with this would be appreciated
-
Not able to access object after server IP address changes
I have an Activatable object that gets registered with the RMIDs registry. If my servers IP address changes, then when I look up the remote object, I can retrieve it from the registry, but as soon as I make a method call I get an access denied to xx.
-
Can't re-start after Installing Server Software
I think I made a mistake, but anyway here is how it went. I have a Silver G4, OS 9.1, 450 MHz. We want to use it as a Server for 2 other G5. Anyway, today , I installed "Mac OS X Server for Version 10.4 or later" on the G4 (without upgrading to OS 9.