I'm no longer able to copy photos from email to my iPad photo stream. The Save menu doesn't come up like it did before. When I press on the image, I only get the option to Copy, and I can't paste it into my photo stream.
II'm no longer able to copy photos from email to iPa stream. The Save menu does not come up Shen I press on the image like it did before.
Hi beerexpert,
I'm sorry to hear you are having issues with your iPad. If you are having unusual menu or option behaviour, you may want to try restarting/resetting your device, as outlined below:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
You may also want to double-check that you have available space, as noted here:
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
Regards,
- Brenden
Similar Messages
-
i installed ios 7.after that my primary cam, one day it just stopped focusing and the pictures are blurry. If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?
This advice will sound like a joke or prank, but believe me it worked on my iPhone 5 and my daughter's. The lens mechanism got stock on each of our iPhones. We found a post on these message boards that said to hold the iPhone about 6 inches above a table or counter top and drop it so that it lands flat on it's back. Now try the camera ...Fixed! It has been more than six months now and neither of our iPhones have ever experienced the problem again.
-
I downloaded a song yesterday, April 6th. It didn't download successfully, but Apple or i-tunes said it has been downloadd to my computer. Well it hasn't. I only get the first 4 or 5 seconds when i try to play it. i don't want to pay for it again. What should I do?
Launch iTunes on your computer.
From the menu bar click iTunes > Preferences then select the Advanced tab.
Click Reset warnings and Reset cache
Click OK.
Restart your computer, launch iTunes.
Click Store > Check for Available Downloads... -
I'm having trouble getting into my ipad. There is message on the screen in a small box saying my subscription to a film has expired. When I press 'ok' in the small box nothing happens and I cannot use the ipad. I have tried turning it off and on but the same message is there and I cannot use the ipad. Any suggestions, please?
Noosie56Try this and see if it helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons -
When I drag files to trash, I only get option to eliminate entirely
When I drag files to trash, I only get the option to delete entirely, except for those which were from the desktop.
When you go to the preferences for Finder, is the last box checked or unchecked? There are settings here to change wether you delete securely or just delete.
-
If someone includes a photo in the email body message (I use yahoo), if I right click on the image to save it to my computer, I only get the option to save it as a firefox document - secure download. If I save it as such and then click on the link, it takes me to a page full of weird code.
Please advise. I would like to be able to right click on the photo as save the image to my computer.If Firefox doesn't saves the image with a valid image file extension like .jpg or .png then you need to add that file extensions yourself. You can rename already saved images and change the file extension to get working images. Add quotes around the name while renaming ("image.jpg") if Windows hides the current file extension or refuses to change the name (i.e you get image.jpg.html).
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?
Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
- Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
- Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
- Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
- Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M. -
I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?
Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.
-
I was filling a form online, then I got to where I had to upload a Microsoft document but when I clicked on upload document I only had the option of uploading photos and videos, but not Microsoft doc. Please help.... How do I upload Microsoft doc and other related office documents?
tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive* -
I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
Currently I have 10 bookmark folders, but when I try to bookmark a new webpage, I only get the option of 5 of them. Is there anything I can do to make them all visible? I am now having to bookmark it to the "bookmark menu" and then manually moving it to the folder I want cause it is not being displayed.
No there is no arrow besides any of the folders (I do not have any sub-folders); I do have a "choose..." option, but that does not work either in showing all of the folders.
-
Trying to import from scanner, but only get the wizard and I need the advanced screen....
Hi,
I just installed Adobe Photoshop Elements 10 (I was using Elements 6 before).
I am trying to import a photo from my scanner, but am having some trouble. I need to import from the "advanced" screen I was using before, but now I am only getting the option to import through the wizard.
In Elements 10, when I click import I only have the option to "Frame From Video", or "WIA Support". When I pick the WIA Support, it takes me to the wizard.
In Elements 6, when I click import my scanner was actually listed and that is where I went to the advanced preview/scan screen somehow related to my scanner (it said Epson Scan at the top of the window).
How do I get my scanner to be listed in the import menu so that I can get to the Epson preview/scan window?
Thanks so much for any help you can give me.
MichelleOh, I spoke too soon. I just found out that I had to move the twain file from the optional plug in folder to the regular plug in folder. Everything is working great now.
-
When attempting to air print I only get the border and not the body of the message?
My ipad and iphone both print to my hp 6500 but when I attempt to print a message I only get the border of the mailbox and no the message content?
Just to clarify, that's from within the email application? If so if you copy and paste text to an email and try and print that, does it work?
-
When i try to sync photos from iPhoto to my iPad using iTunes, the "Selected Folders" option is greyed out with only the "All Folders" option available, how do i change this?
I add the keyword 'sync' to any photos I want added to the iPhone/iPad.
Then, during the regular process of syncing the iPhone/iPad with my computer (mac), the photos with that keyword would be copied onto the iPhone, iPad.
I've been doing it this way ever since I was shown how to; ie after I got my iPhone 2 years ago. And every time the process worked - until the last few weeks. Suddenly it doesn't do it any more.
I believe I have upgraded software (either iTunes or iPhoto or both) during this period. I try to keep my software updated but have noticed previously that the new version often is disappointing.
I've not tended to use Smart albums much.
MM -
I have an iPhone 4 and I can only get the audio in AirPlay/mirroring but no video! Please help!
ktrow,
We are going to get you up and running with all picture text messages. Have you ever been able to receive picture messages in a group text before? Can ou please check some settings for me. Let's go into Settings, Messages, and is MMS Messaging swich green? How about the Group Messaging switch? If they are green, go ahead and switch those off for a few seconds and then turn them back on. Then re-try the picture message. One last thing, you can also try to reset the network settings. Settings, General, Reset, Reset Network Settings. Please keep us posted.
KevinR_VZW
Please follow us on Twitter @VZWSupport
Maybe you are looking for
-
Suddenly my Calendar on my Iphone 4 is formatted in the month display to show the weeks as Monday thru Sunday as opposed to the traditional Sunday thru Saturday. How do I get this back to normal?
-
Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5
Hello, My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports. As well, I would like to ask if there is a simple workaround that does not invol
-
IWeb won't publish site fully.
Hi. I'm having trouble publishing my latest site update with iWeb 1.1.2. I just did a major update to a photo blog I've been publishing successfully for two years. However, after three days of trying, I suddenly cannot get iWeb (or mobileme?) to publ
-
Hi, I am looking for a way for a requisition release strategy to reset (unapproved state) when the value or quantity or both is decreased. I have managed to do this in Config if the value or quantity or both is increased but not decreased. Scenario:
-
Every time I insert a library item I've created it inserts a </table> and then generates an open table. How do I make it stop? I went in and deleted them off of each page, but when I updated images in my library it went through and reinserted all of