I'm not able to access to the internet with my ipod ..help! Non riesco a connettermi su internet via wi-fi !

Salve, ho appena comprato il mio ipod di 8G.. connettendomi wi-fi al router di casa mia, aprendo safari (o le altre applicazioni che richiedono la connessione internet) spunta la finestra con scritto "Impossibile aprire pagine, Safari non può aprire la pagina perché non è connesso a Internet" Ho provato e riprovato, ma niente! Spero possiate aiutarmi, grazie! :)
Hello, I've just bought my ipod (8Gb)... even with the wi-fi I'm not able to access to the internet, opening any app that needs internet my ipod shows this " Cannot open page, Safari cannot open the page because it is not connected to the internet" I tried and I tried but it was useless..! I hope You can help me! Thank you and sorry if my english isn't right

I can connect to the site using another computer on my network. It's completely isolated to my iMac.

Similar Messages

Not able to start any outside contact with iChat : please help !

Hello there,
I will try to cut my long story short : I am from Belgium and presently in Kosovo for a several months mission over there. I was really looking forward to use Apple iChat to stay in contact with my family and kids back home .... but it's not working !
I know there are other solutions eventually but anyway I'd like to understand what's the problem with iChat.
I came first with my Powerbook G4 1,5 Ghz + 1,2 Gb RAM + IceCam + OS 10.4 and "old" iChat on it : not working at all : it would keep saying "not enough bandwidth" for every sort of connection attempts (video, audio only) only text chat was working. I had read that there were lots of problems with this version, so I purchased LEOPARD to have the newest version available and upgraded my internet connection here in Kosovo to a 8 Mbps one !
Unfortunately I crashed my computer with the upgrade process ... anyway, the "advantage" is that I start now from a "clean" copy of Leopard and iChat .... but it isn't working neither ?
Now the message is slightly different though.
You see it's "trying" to get through (takes a little more time to issue the error message ....?) and it states now "connection closed because didn't get any answer for 10 seconds" (I translate the message because my system is in french in fact).
I have copied the details of the error message but can you tell me which part is important, not to paste 3 pages of unuseful text to this post maybe ?
It would be very kind of you if you could help me figure this out because I cannot think of a reason why "we" shouldn't get this to work, right ?
Furthermore, it would help a poor Mac user to stay in touch with his family "back home" !
Thanks in advance.

This is a "paste" of one of the error logs : they basically all say the same thing I guess.
If needed (following a suggestion for example) I could try to come in contact with the support helpline of the company (although it's Kosovo ....) to try to "fix" or answer any technical question you should have without any other mean for an answer than "ask" ....
By the way, my wife "at the other side" in Belgium is behind my PowerMac G5 dualcore with same configuration (Leopard, latest iChat etc.).
Here is the abstract :
Date/Time: 2007-11-11 15:18:03.200 +0100
OS Version: 10.5 (Build 9A581)
Report Version: 4
iChat Connection Log:
2007-11-11 15:17:32 +0100: AVChat started with ID 791289891.
2007-11-11 15:17:32 +0100: messagepads1: State change from AVChatNoState to AVChatStateWaiting.
2007-11-11 15:17:33 +0100: 0x72b4a60: State change from AVChatNoState to AVChatStateInvited.
2007-11-11 15:17:44 +0100: 0x72b4a60: State change from AVChatStateInvited to AVChatStateConnecting.
2007-11-11 15:17:44 +0100: messagepads1: State change from AVChatStateWaiting to AVChatStateConnecting.
2007-11-11 15:17:49 +0100: 0x72b4a60: State change from AVChatStateConnecting to AVChatStateConnected.
2007-11-11 15:17:49 +0100: messagepads1: State change from AVChatStateConnecting to AVChatStateConnected.
2007-11-11 15:17:59 +0100: 0x72b4a60: State change from AVChatStateConnected to AVChatStateEnded.
2007-11-11 15:17:59 +0100: 0x72b4a60: Error -20 (No data has been received for the last 10 seconds.)
2007-11-11 15:17:59 +0100: messagepads1: State change from AVChatStateConnected to AVChatStateEnded.
2007-11-11 15:17:59 +0100: messagepads1: Error -20 (No data has been received for the last 10 seconds.)
Video Conference Error Report:
17.468060 @VCU/streamer/RTPTransport.c:2301 type=4 (80010017/0)
[Bandwidth Detection]
[Timeout after a retry - got an ACK]
Video Conference Support Report:
1.737558 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
12.481176 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
12.484009 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
13.281037 @SIP/Transport.c:2353 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK21e89c2f2d559eae
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1327000398
Call-ID: df57767e-9060-11dc-a621-ce7b0d374012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 446
v=0
o=Doch 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:70:1:1499
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 12 3 0
a=rtcp:16402
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1816032462
m=video 16402 RTP/AVP 34
a=rtcp:16402
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 20:352:288
a=framerate:20
a=RTCP:AUDIO 16402 VIDEO 16402
a=rtpID:3212172719
13.387879 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK21e89c2f2d559eae
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1327000398
Call-ID: df57767e-9060-11dc-a621-ce7b0d374012@lip
CSeq: 1 INVITE
User-Agent: Viceroy 1.3
Content-Length: 0
13.397252 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK21e89c2f2d559eae
To: "u0" <sip:user@rip:16402>;tag=787369386
From: "0" <sip:user@lip:16402>;tag=1327000398
Call-ID: df57767e-9060-11dc-a621-ce7b0d374012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:46526>
User-Agent: Viceroy 1.3
Content-Length: 0
13.425030 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK21e89c2f2d559eae
To: "u0" <sip:user@rip:16402>;tag=787369386
From: "0" <sip:user@lip:16402>;tag=1327000398
Call-ID: df57767e-9060-11dc-a621-ce7b0d374012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:46526>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 399
[v=0
o=Doch 0 0 IN IP4 91.176.145.66
s=0
c=IN IP4 91.176.145.66
b=AS:2147483647
t=0 0
a=hwi:34:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 46526 RTP/AVP 12
a=rtcp:16402
a=rtpID:3159716094
m=video 46526 RTP/AVP 34
a=rtcp:16402
a=RTCP:AUDIO 16402 VIDEO 16402
a=rtpmap:34 h263/90000
a=fmtp:34 imagesize 1 rules 20:352:288
a=framerate:20
a=rtpID:1230032498
13.425924 @SIP/Transport.c:2353 type=1 (00000000/0)
[ACK sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK0537bca55c4fa09a
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=787369386
From: "0" <sip:user@lip:16402>;tag=1327000398
Call-ID: df57767e-9060-11dc-a621-ce7b0d374012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.3
Content-Length: 0
13.750272 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from 91.176.145.66:46526]
14.062259 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=100803.14, NSDev=7.22%]
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
0.000094 @:0 type=5 (00000000/16402)
[Local SIP port]
17.470041 @:0 type=5 (80010017/60)
[Detected bandwidth (kbits/s): 0 up, 0 down. (80010017)
17.489756 @Video Conference/VideoConferenceMultiController.m:1957 type=5 (00000000/0)
[Start Conference With UserID: u0]
[]

Not able to sync all the songs to my iPod

When I sync the music in my iTunes Library to my iPod, it does not copy all the songs. What is the reason for it?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My phone won't sync suddenly with iTunes and I am getting a message thatthe phone is not able to sync because the sync session failed. Help?

When trying to sync my iPhone I am now getting a message that says "...the iPhone could not be synced because the sync session failed to start. I have been unable to discover what, if anything has changed in my settings or what I need to do differently. Help?

What fixed it for me:
On your computer, open iTunes > My iPhone (or whatever name you gave your iPhone) > "Music" page
Uncheck "Sync Music"
Click "Sync" button (bottom right)
Let it run and finish
Uncheck the box for every song, playlist, etc.
Click "Sync" button (bottom right) (This step may be unnecessary, but I did it and got the result I wanted.)
Let it run and finish
Check the boxes for the music you want on your iPhone
Click "Sync" button (bottom right)
Let it run and finish
See if that doesn't work for you. I tried a lot of things that did nothing, but this seems to have fixed it, and quickly.

How do i transfer itunes from my old laptop which is broken on to my new laptop. i have set up itunes on my new laptop but not able to access my hot favourites and various apps so want to be able to transfer all info on to new laptop.mark aberdeen.

how do i transfer my itunes account which has hot favourites and various apps from my old laptop on to my new laptop. my old laptop recently broke down and has since been repaired but i am having trouble accessing my itunes. my daughter has set up itunes on the new laptop but we are not able to access all the original details i.e favourites/apps.

Welcome to the discussions and Merry Christmas!
http://discussions.apple.com/thread.jspa?messageID=797534&#797534
The link should do the trick.
JC

Users are not able to access two different SAP portals at a time

Hi Experts,
Users are not able to access two different SAP portals at a time, if users login the OLD SAP Portal then they are not able to access NEW SAP Production Portal asking user id's & Password while doing ECC & APO transactions.
If user clear the Internet Explorer cache then for time being they can access but its not the permanant solution.
Can any one please help me on this.
Thanks,
Jay

Hello Jay,
here we are facing this problem, this company users not able to access both the portals at at time
If you want to access HTC and Armed at the same time you gotta complete SSO Config or User mapping between these two Portals. You can refer to the below link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/f8/3b514ca29011d5bdeb006094191908/content.htm
Thanks
SM

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access blackberry world on Z10. what could be the reason?

not able to access blackberry world on Z10. what could be the reason? It wasn't issue earlier but facing it from last two days.

Please guys read other forums on this community before posting redundant issues.
Try this fix
Go to the games app.
At the bottom tap on games.
At the right bottom, you will notice three dots. Tap the dots
Tap the option to enter the blackberry world. Wait until the screen is loaded
Swipe right to Enter My World - > My Apps and Games.
Tap the three dots again to check for updates.
Update all the apps and close your App World.
Try accessing the app world in the standard way. Everything mus be fixed by now.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I'm not able to access goolge docs with the blackberry browser (it worked fine till a few weeks ago)

I'm not able to access google docs with the blackberry browser (it worked fine till a few weeks ago)
seems that this issue happens to a lot of people
is google going head to head with Blackberry ? or is this just a bug ?
Message Edited by avolcoff on 08-27-2009 01:06 AM

Welcme to the cmmunity supprt frums
Nurse-Berry
Follow NurseBerry08 on Twitter

Not able to access the mx.controls package

hi,
i found a weird issue. I'm developing my application
entirely using actionscript 3 by creating "actionscript Project' in
the flex builder. I need to use the ColorPicker component which is
under mx.controls package, but to my disappointment i'm not able to
access that mx.controls package and when i forcefully use it the
compiler throws me an error, but when i create a new flex project
and create an asctionscript file, i'm able to access that
mx.controls package and also the ColorPicker class. Can anyone tell
me what the problem is?
Thanks,
Shajahan

I am having the same issue. I'm using Flex 3 and I cannot
access the mx.controls package in any actionscript project.

Not able to access the result set from one member function to another

Im new to jdbc
I have declared a connection object , a result set object and statement object in one member function and i am not able to access these in another member function. But both are in the same class
Kindly help
Thanks
Shasi

Kindly refrain from double-posting:
http://forum.java.sun.com/thread.jspa?threadID=700659&tstart=0
- Saish

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

I'm not able to access to the internet with my ipod ..help! Non riesco a connettermi su internet via wi-fi !

Similar Messages

Maybe you are looking for