I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

Similar Messages

  • Not able to connect the internet through OVI

    Sir I tried to connect to the internet through OVI.  But I am not getting.  Please tell a solution.  Screen shot is attached. Phone C6-00
    Solved!
    Go to Solution.
    Attachments:
    nokia.docx ‏270 KB

    possible solutions:
    1. double check your APN settings with local Operator support.
    2. from your attachment, seems the connection already established, but the IE doesn't work right?  double check yout network setting in IE or the brower you are using.
    3. You can download "PC suite" from Nokia website in case there some specific issue on the OVI suite in your computer.
    let me know if these can give help?  good luck!!
    if this answer is helpful for solving your issue, pls press the white star, thanks!

  • HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

    I have a MacBook Pro and not able to connect to Internet.  I have other HP comp and iPad and am able to connect.  I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection.  Any suggestions?  Thanks!

    Call Apple Care back & tell them their suggestion did not work. 
    Solution may be found if you search in the "More Like This" section over in the right column.

  • The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Thinkpad- T61 - Not able to connect to Internet either by cable or Wireless

    Hi Friends
    I'm having a T61 Thinkpad and yesterday i had tried system restore, but it has not done any changes,
    But then, I'm not able to connect to Internet either by cable or by Wireless.
    When i pressed Thinkvantage, i could see the Hardware wireless is on "OFF" status and I'm not able to turn it ON
    Can anyboby help me on fixing this issue and enable connect to INTERNET
    Thanks in advance
    Regards
    Sasi

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • Not able to connect to internet usig LAN

    hiii
    i have domain network which is connected through LAN for all the user machines now suddenly what happened we don't know all the machines are not able to connect to internet and domain also.
    help me to get out of this problem
    thanks in advance
    with regard's
    haasan 
    thanks & regrds sri ram

    Hi
    I think we need bit more information regarding this issue.
    You've said machines are not able to connect to Internet and Domain. Two different things are you not able to log on to the domain with your domain user accounts.
    Are the Domain Controllers are up and running or have you checked if your switchs are working properly.
    Please update with the above then we can help further.
    Thanks
    Umar

  • Not able to connect my Iphone to my WRT54GS router with security enabled

    As the subject line states, I'm not able to connect my Iphone to my WRT54GS router when the security is enabled. When ever I attempt to connect to my network with my phone it always tells me the password is incorrect. I have double checked the password in the easylink advisor and it matches up. I have also tried both WPA and WEP with the same result, I know that the wireless is working on the router as I turned the security off and was able to connect to it. I updated the firmware this evening also with no changes. If anyone could help me with this issue it would be much appreciated.

    First of all, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also, in the router, set "SSID Broadcast" to "enabled". This will help your iPhone find and lock on to your router's signal.
    To connect using WEP, enter WEP "key 1"  (found in the router)  into the iPhone, not the WEP password or passphrase.
    To connect using WPA, make sure that there is not an encryption nomenclature problem.  For example, WPA is not the same as WPA with AES.  Please note the following:
    WPA    =   PSK    =   WPA with TKIP  =  WPA   personal
    WPA2  =   PSK2  =   WPA with AES   =  WPA2 personal
    I am not certain, but your iPhone probably does just ordinary WPA  (not WPA with AES).  Assuming that this is correct, then the router should be set to:
    "WPA personal"  with  "TKIP"
    Also, in the iPhone, be sure to delete the entry for your unsecured connection to your router, before you try to input info regarding the secured connection to the router.
    Hope this helps.
    Message Edited by toomanydonuts on 07-16-2008 03:12 AM

  • Not able to connect to CRMOD through Oracle Peoplesoft environment.

    We are setting up integration of CRMOD with our internal Peoplesoft Finance application using web services from CRMOD. We are not able to connect to CRMOD through Oracle Peoplesoft integration broker. Pl assist. Peoplesoft development environment is in company LAN.

    If you are using SSO to access CRM On Demand, It will be best to raise an SR with Oracle so they can assist you with your technical difficulties.

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • Not able to connect to Internet (Safari pre-set websites, YouTube, i-Tunes)

    I am not able to connect to the internet, even though it appears I'm getting wireless on the iTouch. Have read numerous threads, nothing I have done has worked (tying to match my iTouch wireless settings to my Windows laptop settings, restarting router multiple times, choosing other under networks and trying to reset up my router config, trying to connect to IP using http://192.168.1.1 and/or http://192.168.1.1).
    So get message "Cannot Connect to iTunes store", "Cannot connect to YouTube", and "Safari can't open the page because it can't find the server".
    On my wirless settings (note my router is a Netgear DG834GB and works fine on both Windows based laptops in our home):
    - My home network is checked;
    - Under DCHP, BootIP, and Static all fields BUT router, search domains, client ID are checked.
    - HTTP proxy is currently set to Auto with URL blank.
    Apologies, been trying to read through threads to find the answer that will get me going, but either haven't found it yet or things like installing firmware (where do I install it, on my laptop or itouch, etc?) I don't understand what exactly needs to be done to do that.

    disable wireless security on your router and see if you can connect

  • Not able to connect to internet in boot camp

    First time using a mac computer so I decided to install vista on my macbook pro. But when I enter Vista I am not able to connect to the internet, I have looked through the leopard and vista discs trying to find the right files so I can use the internet. So any suggestions on how I can connect to the internet using vista?

    After Vista installed, did you insert the Mac drivers CD (if you're running the beta Boot Camp) or the Installation DVD (if you're running Leopard)? Without the Apple-supplied drivers you probably won't have a lot of things working right.
    Doug

  • Please Help - WRT54GS "not able to connect to internet"

    I just purchased a WRT54GS Wireless Router, and I follow the instructions by putting the CD in first, and I follow the instruction on the CD, but every time I try and set it up a message comes up and says "The router is not able to connect to the internet." blah blah.  And I've tried resetting the router, turning the DSL modem off and back on, restarting the computer, unplugging and plugging back in over and over, and I still can't get it to work.  Any advice would help.  Thanks.

    1.Make sure you have good internet with your pc direct to the dsl modem
    2. If so, connect the router to the DSL modem and tthen the pc to the router.
    3.then open a web page and enter 192.168.1.1 no user name but the default password is "admin"
    4.You may have to turn on PPoe on the basic set up page and it will also need your sign on and password. put those in.. leave the rest defaults. Save the settings and then try on home icon on your web browser to see if you can get to the internet.
    Message Edited by jet75080 on 01-14-200707:25 PM
    Steak is my favorite animal.

  • HP Officejet Pro 8600 not able to connect to internet ip setting disabled

    My printer has been connected and working in wireless mode for 2 months. now not able to connect and printer is locked and shows "IP no link".

    Power off both printer band router.  Power on router wait 3 mins.  Power on printer and verify it connects to your router and you have a valid IP.  Reboot computer and now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • 1.Not able to connect other iPhones through bluetooth

    Hi,
    1. Bluetooth is not working for me in iPhone 5. Not able to connect even other iPhone through my bluetooth.
    2. Wifi not working properly sometimes. Example If i connect my mobile with the wifi network it was connected first, then i disconnect the Wifi modem after that i switch on the modem then connect the wifi it is searching long time.
    3.Camera- I took a snap with Flash mode (ON) in the very dark area.The photo dispays full of white color.

    This is not supported by the bluetooth profile http://support.apple.com/kb/ht3647

  • Still not able to connect to  internet

    Dear list,
    This topic has been discussed before in other threads and help was provided. After reading through the ttreads ,i went through all steps to configure my internet connection but it is still not working.
    so far i have done these
    1) entered by ip address in /etc/hosts
    2) entered my isp ip address (main and secondary)
    3) add hosts : file dns in etc/nsswitch.conf
    cp etc/nsswitch.dns to etc/nsswitch.conf
    4) entered my ip in etc/hostname.lprb0 i am using intel 10/100 LAn card
    5) plumb lprb0
    6)assign my ip to lprb0
    after rebooting I can see that my lprb0 connection is active and receiving data..however the sent packets is much lower and does not seem to increase beyond 12 ...??
    I am still not being able to conect to internet .. can somebody help.
    where could i go wrong.
    thanks
    Slaximan

    Hello
    Your DSL modem is your router. The /etc/defaultrouter file should have the ip address of the DSL modem's ethernet interface. (i.e 192.168.0.1 for example. your hosts ip address should be on the same subnet.)
    One issue I ran into with my DSL modem was I could get to some sites through Mozilla/Firefox but not others. Even though I could do nslookups and ping these sites, (yahoo.com, google.com).
    The solution was to bring up the browser and in the URL filed type "about:config" and change "network.dns.disableIPv6" from false to true. Then I could get to the site I couldn't before.
    Hope this helps.

Maybe you are looking for

  • Can I use Creative software for 2 Ze

    I have a Zen Touch 20G, which I feed with Creative Media Source Software. I just got a Zen Micro, which came, of course, with its own software. Before I install the new files, I'd like to know if the installation will let me choose between the two MP

  • HP Laserjet 2200 Series PCL5

      Printing not working properly My printer stop printing with anything coming out -- isn't grabbing the paper from the tray. It sounds like it's going to print (rollers going) and nothing comes out. The red exclamation point light is coming on. I hav

  • T410/T510 and Dual Displays

    I'm looking at the T410 or T510 for my wife for her business.  I wanted to try and set her up with dual displays (either the laptop LCD itself plus one display or two physical displays.  Is there anything I need to be aware of in regards to a dock so

  • How to put F4 facility in the selection screen using

    <i><b>HI Experts, i have a query .. i want to put F4 facility in the selection screen and The F4 help  for the order number (chvw-aufnr) on the selection screen should be the same like the F4 help for order number in transaction COOIS.. PLease provid

  • Branching Does Not Work

    Using a trial version, I am creating a short software procedure simulation for a non-PC device. I want to show some error conditions, so I ask in a Question slide if user has received an error on their device. I jump to the appropriate slide based on