I'm not able to receive 1.2 updates for my Nokia x...

I do have a Wi-Fi connection, sufficient available memory and all the above battery..... Still I'm not receiving an update for 1.2..

Have patience, wait for it.
A past Nokia X user, now a X user.

Similar Messages

Not able to post J1I5 (Excise Updation for reversal document)

Hi,
We have reversed the material document with "MBST".
SAP does not update the reversal excise entries for the document posted through MBST.
SO WE ARE TRYING TO UPDATE EXCISE (PART1) THROUGH J1I5.
Input given are Posting date, Excise Group, company code,Plant, Material document and classification as "IPD"
We are getting the material document list after executing the J1I5 but not able to simulate and Post the same
Error "Processing over ZERO Records.
Thanks
Prakash

hI,
Go to J1IS click cancel excise invoice (Shift+F6) , give the internal document number of your excise invoice created and year then click the cancel excise invoice , it will cancel the excise invoice .If u go to J1IS and cancel the document only the excise invoice created will be cancelled, no accounting entries will be generated. In order to capture accounting entries you have to fetch the accounting document of J1IS through table j_1iexcdtl and j_1ipart2, pass a reversal entry for the accounting document through FB08. And if you want to post again with the same material documents create the excise invoice in J1IS with respective same material document

Not able to down load software updates for months...How can this be corrected?

I have an iMac and am running Mac OSX 10.8.6. Have not been able to download software updates since May. Have tried many times. Receiving the following error message: "The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs." How can I correct this problem???

Hi,
Please refer to the below thread which could be helpful:
DME file is not generated
Regards,
Kiron Kumar T.

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?

The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?

Follow the steps in the article below to try and resolve the issue:
iOS: Wi-Fi settings grayed out or dim
If after all the steps the issue remains I'd suggest to book an appointment at an Apple Retail Store to have your iPhone evaluated or contact AppleCare for assistance.
Hope this helps

Mendelson AS2 - Not able to receive messages- error 302 response code.

Team ,
Our scenario is IDOC ( Delivery ) to AS2 ( Mendelson ) . Not able to Receive AS2 message on mendelson tool. The tool is installed on the server .
Receiving the error :
Message processing failed. Cause: javax.resource.ResourceException: Message cannot be delivered: Remote server returned response code 302 and error message Found
No certificates are been used.
This is my As2 Receiver Channel. Can anyone help me on this.

Team ,
On connecting to the server , mendelson AS2 Server, the channel gets connect to this ip 10.30.10.38.
Is there a proxy placed to connect to mendelson. Can anyone provide inputs on this.
Processing Details for Cluster Node Server 00 70_7097763
Type
Time Stamp
Message ID
Explanation
8/21/14 5:34:34 PM
3456cba5-2929-11e4-caad-00002a4e53de
Message processing failed. Cause: javax.resource.ResourceException: Message cannot be delivered: java.net.ConnectException: Connection timed out: connect
8/21/14 5:34:34 PM
3456cba5-2929-11e4-caad-00002a4e53de
disconnected
8/21/14 5:33:52 PM
372154d8-292b-11e4-82f8-00002a4e53de
prepared request to http://10.30.10.38:8080/as2/HttpReceiver
8/21/14 5:33:52 PM
372154d8-292b-11e4-82f8-00002a4e53de
prepared message (1 KiB)
8/21/14 5:33:52 PM
372154d8-292b-11e4-82f8-00002a4e53de
Message processing started

I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
This is a known issue with Yahoo email account.

User not able to receive an emaik from SAP to Outlook.

User is not able to receive an email from SAP to Outlook.In SCOT the configuration to receive email has been set up and all other users are able to receive the emails except one user. Even the email address of the user is correctly entered in the user master record. What is the authorization required to be setup for this user from security perspective ?
Thanks.

Hi,
We have configured the SMTP server in our system to send out mails, but we donot know the configurations for receiving mails. [ We are not using SAP exchange connector (is it needed?) ]
I have read the note 455140 and 54617.
But i am stuck on , What are the configurations to be done on the MS Exchange Server 2003 for redirecting the mails received in the inbox of a particular user to the SAP system.
The note says it has to be configured to redirect mail to <hostname>: <port> But where exactly do we define the routing rules.
If anyone has a detailed document on what are the configurations involed in receiving mails, Please send it.

I'm not able to receive e-mail messages

I can successfully send e-mails, but am not able to receive any???

Acouple of days ago, the verizon home page went belly up so I had to access e-mail directly through the Yahoo Mail home and start using that as my new home page. I concluded that this was because of the Verizon change over away from Yahoo. Way to go Verizon, alienate a bunch of customers and don't provide change-over service. The day before yesterday, what a relief! I opened my verizon.net e-mail on yahoo and there was only a third the e-mails there to sort through for the day. I figured I was just lucky and I must have sorted them more recently then I thought. The next day, yesterday, when I opened my e-mail, there were no incoming e-mails when I went to yahoo directly and I am now in my second hour of trying to get customer support for how to access my e-mails. I only get 40 or 50 non-spams per day, but I use my e-mail records to keep track of some contacts which are very important to me. I've been on the phone with internet e-mail customer support for an hour now, (One Hour) listening to the repeating hold message of "We are experiencing an unusually busy period. Your call is important to us. Please stay on the line and your call will be answered in the order in which it was received. Your approximate wait time is less than 30 minutes." The message has been repeating this false iformation for the last hour and 10 minutes now. The time period is not diminishing, counting down or changing at all. Its just wrong. Verizon is really trying hard to convince me to drop them and go with another company. Why would a company do that to a long term steady paying customer? How can they stay in business doing this with their customer service? They have totally lost their minds!

PIX515 version 7.0 and router 2811 ver 12.3r8 not able to receive emails from gmail files larger than 2M

PIX515 version 7.0 and router 2811 ver 12.3r8 not able to receive emails from gmail files larger than 2M

MatejLach wrote:
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Seems like a permissions error to me... maybe check the actual file it is attempting to scan... I know it is in your home folder, but just to be sure, you might want to check that everything is sane.

Not able to receive email but able to send

I am not able to receive my emails, but I am able to send? Comcast said all my settings were correct and I am able to view my email if I go and log into my comcast acct.?

Mail: Troubleshooting sending & receiving email messages

I have an airport express and it seems that I am not able to receive any updates any more

Greeting from Belgium!
I own an Airport Express and since august 2012 I am not able to receive and download any updates for it.
The light on the AX is also flickering orange and that is a sign of a weak or bad connection according to the manual.
I have tried a soft reset but still no improvement !
When I am trying to work with the Airport Configuration Utility it does not recogneize any AX base station .
Can anybody tell me if encountered the same issue and explain to me how to resolve it ?
Thank you very much

paja1505 wrote:
I have tried a soft reset but still no improvement !
First try a "hard reset".
If that does not enable you to use AirPort Utility to configure the Express, then try a "factory defaults reset":
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.
A "factory defaults reset" is similar to the above. The only difference is that it will erase any saved configurations. To do that:
First, unplug the base station from power. Press and hold its tiny reset button and keep it depressed while connecting it to power. Then, release the reset button.

After upgrade to 7.1 not able to receive Text message

After upgrade my iphone 4 to IOS 7.1, I am not able to receive text message. I am able to send text message and also send and receive iMessage but not able to receive text message.

Hi ahiphone,
If you are having issues receiving text messages after updating to iOS 7.1, you may find the troubleshooting in the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

Not able to hear call waiting beep in my Nokia N8 ...

Not able to hear call waiting beep in my Nokia N8 after Nokia Belle software updated

Mahesh
Settings > Calling > Call > Call waiting > Activate
If my post has helped you please click the white star on the right

I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

I'm not able to receive 1.2 updates for my Nokia x...

Similar Messages

Maybe you are looking for