I'm not able to set Analog Input voltages, etc

ok,
so i have an NI DAQ I/O card (NI PCI 6723, or something to that effect) and i'm trying to configure the channels for Analog Input signals.
when i try to choose any kind of setting for Anolog signal by:
>>drop DAQ Assistant vi onto the block diagram
>>>>choose Analog Input
>>>>>>>Voltage
i get this message "No supported devices found"
i thought since I have the I/O card, i should be able to configure channels for both input/output.
i also have ADAC card (from IOTECH) installed but when i look at MAX, i only see the DAQ card.
i'm really confused at this point. can anyone break things down for me ... what i'm doing wrong?
-r

stuartG,
you were right. so what i'm using for the input is a ADAC 5501MF from IOTECH
following their manual (http://www.iotech.com/productmanuals/adac_lvi.pdf) it says that the ADAC-LVi libraries can be located at "Functions->User Libraries" palette of labview.
does this mean that i have to install the ADAC-LVi driver in LabView->User Libraries directory?
if that's not the case then i don't see why the ADAC-LVi is not showing up in the LabView User Libraries since i've installed the driver correctly (in C\Program File\ADAC )
do you have any idea why?
thanks
-r

Similar Messages

Please help! Not able to set Video input Port(S-Video or Composite)on Linux

Hi
I am using JMF2.1.1e(Linux performance pack) for video capturing on Linux OS. I want to set video input port(S-Video or composite) through my application. I am using the following code:
     if ( dataSource != null )
          arrControls = dataSource.getControls ();
     if ( arrControls != null )
          nCount = arrControls.length;
     System.out.println("No. of Controls: " + nCount);
     for ( i = 0; i < nCount; i++ )
          if ( arrControls[i] == null )
               continue;
          if ( !(arrControls[i] instanceof Control) )
               continue;
          componentControl = ((Control)arrControls).getControlComponent ();
          System.out.println("ComponentControl : " + componentControl);
          if ( componentControl == null )
               continue;
But, i am getting No. of Controls: 0 (Zero). So i am not able to get any control component also. Rest of the application is working fine. Please help me solving this problem.
Thanks in advance.

To go a stage further.
Google run a Jabber server for their service.
Jabber apps (those that can) use a Protocol called Jingle to make the A/V connections.
Google's version is not even that compatible with other Jabber apps. (See Here)
The Plug-in in the Google Install (Or the Standalone Web Browser Plug-in allow Browsers to access the GoogleTalk A/V side as does the Standalone PC app called GoogleTalk as well.
iChat uses a process called SIP (Session Initiation Protocol) to connect to other iChat Users or to the AIM for PC app.
However this also works in any iChat to iChat Connection no matter if the Buddy List is an AIM Login based one, Jabber (including GoogleTalk) or A LAN based Bonjour Chat.
In you care this is not going to work.
Getting the Standalone (Intel only) Browser Plug-in and using the Chat option in the Google Mail Web page is probably the easiest option.
7:31 PM Friday; January 7, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

I am not able to set high and low limits for each channel seperately using LabWindows/CVI

I am using AI_StartAcquisition and AI_ReadAcquisition functions to acquire data using PCI 6025E DAQ card and iam using Lab/Wuindows/CVi5.0 software. But one of my transducer has its range in +/- 500 mV soi need to set the high low limits of each channel seperately for that i am using commond string function(cmd) but still i am not able to set the limits properly. Does anyone has any idea about this trouble

You can set the gain on a per channel basis by using the lower level functions. (As opposed to the easy i/o functions.) For example, look at the "SCANsingleBufSync.C" NI-DAQ shipping example that uses the SCAN_Op() function. It's gain parameter is an array of gains that will allow you to change the input limits for each channel separately.
-Russell

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Not able to set cookie domain ???

Hi All,
I am not able to set cookie domain in my webapp(WebApp.mydomain.com).
My sample code is given below, my webapp name is WebApp.mydomain.com, this has got two jsp pages, one for creating cookie and other one is for reading the cookie.
CreateCookie.jsp
    Cookie cookie = new Cookie("id","123");
          cookie.setDomain(".mydomain.com");
          cookie.setPath("/");
          response.addCookie(cookie);ReadCookie.jsp
Cookie[]cks = request.getCookies();
          for(int i=0;i<cks.length;i++){
       out.print("cookie found.............................   "+cks.getValue());
Issues:
1. I am not able to read the cookie, if i set the domain as cookie.setDomain(".mydomain.com"); at cookie. I verified it by commenting the domain setting line.
2. The reason for setting the domain is, I have another web application "WebApp1.mydomain.com" which is supposed to read this cookie which is created in "WebApp.mydomain.com" application.
3. Is it possible to access the cookie across the applications as the cookie domain and path are been set. (i.e) From WebApp.mydomain.com to WebApp1.mydomain.com?Please share your inputs :(
Thanks,
Sundar

Hi All,
Any comment/solutions on this???
Regards,
Sundar

Not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365

not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365?
Any idea?

after few days test in my lab, I can see that only email enabled group can be added as site collection admin using POWERSHELL.
hope this helps who stuck like me!! :-)

Not able to set Weblogic Runtime on eclipse while adding new weblogic srvr

Hi Everyone,
I downloaded Oracle Integration pack for eclipse by clicking at "Download additional server adapters". I am not able to set Weblogic Runtime on eclipse while adding new weblogic server.
I am trying to give following values:
Name :Oracle WebLogic Server 10gR3 (2)
Weblogic home :C:\bea\wlserver_10.3
Java home: C:\bea\jrockit_160_05
Below it I am getting "No applicable extension found" and finish button is greyed out.
Please help in telling what is wrong. Never faced such an issue.
Thanks
SM

I found this problem too.
OS:windows7、eclipse:helios、oepe:Part of Oracle Enterprise Pack for Eclipse 11.1.1.7.3
<workspace>\.metadata\.log:
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: enter_new_hit_count in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: exception_occurred_setting_bp_properties in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: hit_count_must_be_positive in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: no_description_provided in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: scripts in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: select_javascript_file in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: set_bp_hit_count in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: suspend_target in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: suspend_thread in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: the_argument_0_is_not_valid in: org.eclipse.wst.jsdt.debug.internal.ui.messages
I tried the weblogic 10.3.1、10.3.3、10.3.4、10.3.5 still show the info that "No applicable extension found" and finish button is greyed out.
What is the reason?
thanks!

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

http://support.apple.com/kb/TS1538

Last week I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on

I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
Does any body have solution to above problem.......

This is iCloud forum. For iPhone issue go to the Using iPhone forum
Anyway try this
IOS: Wi-Fi or Bluetooth settings greyed out or dim.
http://support.apple.com/kb/TS1559

Not able to set values in drop down for a table field

Hi All,
I am not able to set values in drop down for a table field. Although I am able to set these values to a stand alone field but its not happening for a particular table field. I am using ABAP web dynpro for coding.
Pls help.
Regards,
Bhaskar

Hi Otto,
Here is the code I am using:
* navigate from <CONTEXT> to <DATASOURCE> via lead selection
lo_nd_datasource = wd_context->get_child_node( name = wd_this->wdctx_datasource ).
* navigate from <DATASOURCE> to <CHANGING_PARAM> via lead selection
lo_nd_changing_param = lo_nd_datasource->get_child_node( name = wd_this->wdctx_changing_param ).
* navigate from <CHANGING_PARAM> to <EDUCATION_TAB> via lead selection
lo_nd_education_tab = lo_nd_changing_param->get_child_node( name = wd_this->wdctx_education_tab ).
node_info = lo_nd_education_tab->get_node_info( ).
REFRESH ddlb_value_set.
DATA: wa_edu_est TYPE t517t.
SELECT * FROM t517t INTO wa_edu_est WHERE sprsL = 'EN'.
    s_element-text = wa_edu_est-stext.
    s_element-value = wa_edu_est-slart.
    APPEND s_element TO ddlb_value_set.
ENDSELECT.
SORT ddlb_value_set BY text.
*    Set Value_sets to node_info
node_info->set_attribute_value_set(
     name      = 'EDU_EST'
     value_set = ddlb_value_set ).
Regards,
Bhaskar

I can't seem to remember my security answers and I'm not able to set up a rescue email address and Idon't know what to do.

I can't seem to remember my security answers and I'm not able to set up a rescue email address and I don't know what to do.

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(107599)

HT204023 I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me

I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me. Before I was using this service but now facing problem.

Md Asad wrote:
Yes but they told mobile co mean Device 'iPhone co'
Sorry but that makes no sense in English. Only your mobile phone company (i.e. "carrier") can enable the Personal Hotspot feature.

I have an ipad2. My email account is on rediffmail. I am not able to set rediffmail on the MAIL icon on ipad2. Can you guide me?

I have an ipad2. My email account is with rediffmail. I am not able to set rediffmail on the MAIL icon on ipad2. Can you guide me?

really your going to want to contact verizon to get the proper setting

Not able to set up yahoo mail account : N8

I bought N8 just few days back.
I can able to set up Gmail account but not able to set up yahoo account.
It shows error:
Unable to connect with information provided. Try again ...
Please help..

I think you require a plus account to download mail to an email client incl a mobile phone, saying that though last year if you're in the UK you could download Yahoo mail without a plus account & I still do even though the Yahoo help pages say I require a paid account.
It may be that your username & password are incorrect or the settings are,
Here's what I have:
pop.mail.yahoo.co.uk, port 995, SSL on.
smtp.mail.yahoo.co.uk port 465, SSL on.
Username is the usual - bit before the @.
Passwords might be case sensitive.
Hth,

I'm not able to set Analog Input voltages, etc

Similar Messages

Maybe you are looking for