I m not able to use my dvd player and its not working???

i need to register a complaint about this???

Hi,
Well, I don't know your machine and its OS therefore very hard to help. But, please try this:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

HT3529 I've never been able to use iMessage or FaceTime and its really making me mad...any idea how to get it working?

I've had my iPod for over six months and I haven't been able to access FaceTime or iMessage...not to mention my camera stopped working for no reason!

For the camera problem try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order
For FT and Messages:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
How to get started with iMessage | How To – CNET
iOS 5: iMessage not working – how to fix - Apple Toolbox
Also:
- Go to Settings>General>Time&Date and make sure it is set to Automatic
- Go to Settings>wifi>the connected network and change the DNS to Google's 8.8.8.8
- Settings>General>Reset>Reset Network Settings. You will have to reenter all network passwords.

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. i rang Applecare a

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.

Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

Sick of not being able to use adobe flash player. Anyone else?

Purchased iPad to watch sporting events on Internet while traveling. Much to my disappointment, iPad does not support Adobe Flash. What gives? Ready to trade for Zoom and will recommend others to purchase same if not resolved SOON.

Sick of not being able to use adobe flash player. Anyone else?
Not at all.
Ready to trade for Zoom
What is "Zoom"? Perhaps you mean Xoom?
and will recommend others to purchase same if not resolved SOON.
Then you should contact Adobe and see what they are doing to resolve it since Flash is their product and they gave up because they could not complete a version for iOS.

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
WDS network
If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

DVD Remote Control buttons don't work when using regular DVD player

I created a DVD using DVD Studio Pro (version 3.0.2) and am unable to navigate through any menus or buttons using the DVD players remote control. I can press the play button on the actual DVD player and play the movie. How can I fix this issue? Any suggestions would be helpful!
I never changed the default setting on the file I made and the DVD works just fine in the simulator as well as any computer DVD player. Also, is there a way to make sure the DVD will play on all DVD players even if it doesn't read burned DVDs?
Thanks for the help!

Not sure if I can add anything here - you're in good hands! I'd like to know how you constructed the menus - did you use photoshop layers for the background and overlay, or did you use a pict file? Are these motion menus or static?
About the compatibility - a burned disc will only ever be about 85% compatible with the number of DVD players out there, and if a DVD player states that it cannot read from DVD-R or DVD+R discs then it most likely won't play your disc. The only way to approach full compatibility is to have the disc replicated, but the cost of this usually means it is not worth while for anything less than 500 to 1000 discs at a time. If you are using DVD±R then all you can do is take steps to make sure the disc is as compatible as it can be, such as keeping the MPEG encode less than 7.5MBPS, using AC3 audio, not applying paper labels and so on.
Compatibility is getting better in general, this summer I have burned in excess of 90 individual projects on DVD-R (and duplicated each one up to seven times each) for playback on consumer players and only one came back (so far). When I looked at it there was a chunk missing from the surface of the disc, which probably explained the error!

Clock freezes after using Apple DVD Player

I am having a small and annoying issue with the Apple DVD Player (v 4.6.5). This just started happening recently. Everytime I run a DVD (or video TS file, etc) on the software player-it performs as usual. After quitting the application and choosing to eject the disc, I notice there is a longer lag from when I first used the computer, then the little colored wheel of death spins, and eventually Apple DVD Player closes.
The problem, however, is after the application is closed out, my time freezes in the status bar in the upper right hand corner of the screen. (As I write this it says 1:16 and the time in the apple "date and time" preferences panel of OSX says it's 2:14-which is the real time) If I drag the cursor up to the time status bar in the upper right hand corner, it turns into the spinning color wheel, and back again once dragged out.
Once the computer restarts, the time in the upper right goes back to normal with no spinning wheel (until I open Apple DVD Player and quit out of it again). I know this is not an earth-shattering issue, but it is fairly annoying and abnormal. If anyone has suggestions, please help.

It sounds like you found your answer but I also wanted to mention that this is a known BUG when using DVD Player and the Digital Optical Out of a G5. If you look at activity monitor when the Clock is dead and you get the Beach Ball the SystemUIServer will be listed as not responding. If you Force quit this process everything should start working again. As long as the LoginWindow Process is running the SystemUIServer will restart when needed after the force quit.
HOWEVER, The other part of this bug with Digital Optical Out is that sometimes the LoginWindow Process will also stop responding. In this case a Log-Out is the only way to correct the problem. The third part of this bug is sometimes the Finder also stops responding but a Relaunch will fix that.
As I said it sounds like you found your problem but I wanted to post this incase others out there using the Digital Optical Out read this and don't correct their problem.
Also, If you were using the "DOO" by deleting the .plist will set the DVD player back to SYSTEM falsely making one think the problem is fixed.
Last I know this is a known bug because I submitted it as a bug to Apple and received an e-mail stating they know of this problem already.

Trouble scrolling on the main menu using my dvd player.

I can't seem to move to the scenes button when I'm on the main menu using my DVD player. This function seems to work fine on my computer. Before I burn another (very long) disc and try again, does anyone have any suggestions?
Natalie

If I have two buttons, one for Subtitles on and one for Subtitles off, how do I make it so that the one that is chosen is highlighted?
You set it by changing the menu's property for the default button. This is one of the reasons a separate menu is generally used. If you have a single menu with 3 buttons ("play movie," "subtitle on," and "subtitle off"), and you set the default to "Active Subtitle Track," then your "play movie" button won't ever be the default.
To play with this and to decide how you want your disk to work, create a test EN project with 2 menus. Rename one of them "Main Menu" with 2 buttons "Play Movie" and "Subtitle Setup." Rename the second menu "Subtitle Setup" with 3 buttons, "Subtitle On," "Subtitle Off," and "Main Menu." As noted, the "Default Button" property for the menu "Subtitle Setup" will be "Active Subtitle Track." The button "Subtitle On," using specify link, will link to its own menu, default button, but will specify Subtitle 1. Same for the button "Subtitle Off," except that it will specify Subtitle Off. The Main Menu button simply links to the main menu.
Note that in Encore preview, do not use your computer mouse to hover over the buttons. It will trick you into thinking that you have or have not set the behavior correctly. Use the little remote function in the bottom of the preview window.

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

I'm using a Mac. After swithcing to ICloud will I be able to use IWeb to upload and publish my sites hosted by other servers like Prohosting ?

I'm using a Mac. After swithcing to ICloud will I be able to use IWeb to upload and publish my sites hosted by other servers like Prohosting ?

iWeb has two other ways to publish your site...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and the second method allows you a choice of how you upload the files...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
Here's a publishing workflow checklist...
http://www.iwebformusicians.com/Search-Engine-Optimization/Website-Publishing-Wo rkflow.html
The MobileMe only features can be replaced by alternatives...
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
If you have folders of assets outside of the main website folder on MobileMe, download them from the Apple server. From the Finder Go menu, follow the path iDisk/My iDisk/ to get there. Your website files are in the Web/Sites folder. Drag any files/folders onto the desktop.
Use an FTP application to upload these assets to the root folder on your new server...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
...and change the relevant URLs to...
http://www.domain-name.com/Folder-Name/file-name.file-extension
There are lots of options for hosting for about half the cost of MobileMe...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you have been using a web.me.com domain name, you need to register a new one. Most hosting services give you at least one free and registering with your hosting company will make forwarding and managing it a lot easier.
Make sure you add the new name to Google and create, upload and enter a new sitemap.xml...
http://www.iwebformusicians.com/Search-Engine-Optimization/SEO.html
If you have inbound links on other sites...
http://www.iwebformusicians.com/Search-Engine-Optimization/Inbound-Link.html
... remember to inform the webmasters of you new URL.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

HT2490 how do i change my settings for iMessage on an iMac? I want to be able to use multiple email accounts and cell number as well.

how do i change my settings for iMessage on an iMac? I want to be able to use multiple email accounts and cell number as well.

Open Messages and choose Preferences from under the menu bar program's name and add source accounts to use.

TA44597 I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it.

I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it. help!

Portsian wrote:
I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.
Is it also a CD/DVD burner? Or is it kjust a CD/DVD player?

How do i get files larger than 2 gigs on a usb drive and still be able to use on a mac and pc?

how do i get files larger than 2 gigs on a usb drive and still be able to use on a mac and pc?

You can format the drive using ExFAT or you can format the drive NTFS then use third-party software on the Mac to enable writing to it: NTFS 11.2.443.
Disk Utility 12.x- Format a disk for Windows computers

Cannot use BD DVD Player: WIN DVD MFC application has stopped working

Tried to install my old version of WinDVD and failed and in the process may have accidentally deleted a file,
for now whenever I try and use BD DVD Player I get the following message:
'WIN DVD MFC application has stopped working '
I tried using restore point but still get it, can anyone advise please?

It will be interesting to know which notebook model do you have.
Anyway, in my opinion there is some software conflict. I can imagine both players use same modules or plug-ins and there is conflict.
I dont know what solution can be but maybe you should remove both players, restart your notebook and make clean BD player in hope it will works properly.

I m not able to use my dvd player and its not working???

Similar Messages

Maybe you are looking for