I'm on a website that states it requires a client certificate to validate identity. When I select a certificate to use to connect to the website, it goes back to the list of certificates. I can't seem to get anywhere. Help!
I am on a website that requires a client certificate to validate identity. When I select a certificate to use, it goes back to the list of certificates. I can't seem to get anywhere. Help!
You should be given the certificate, or cookie, by the website. See if in Preferences (under Safari on the menu bar), Privacy, do you have certificates blocked Always?
Similar Messages
-
Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?
Hi,
I was facing issues with both backup and FB integration after the iOs 6 upgrade. Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
I had read in a separate post about this solution so tried it . . .
I deleted the original FB app and hard booted the phone. I then went into settings and entered the data for FB integration. Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password. Seconds later I was verified and then prompted to download the FB app. All backup and integrated.
Then I went into the iCloud backup, turned it off . . . and deleted the last backup. I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up. It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
A good nights work. Backup and integration all sewed up. Good luck.
Cheers
Ian -
i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.
Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo. -
From my dozens of bookmarks, I often would like to open 5 or 6 of them at once -- perhaps a couple of weather reports, a couple of radio stations, a couple of other websites. But I see no way of doing this without laboriously finding a bookmark, selecting it, opening the website, then returning to the bookmarks, finding the second bookmark, selecting it, opening the website, and on and on. Surely there's a way for me to select multiple unrelated bookmarks and open them at the same time. Thanks much for your help. Don
''Actually there is a picture and better explanation in the corresponding History article''
* ''http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox ''
Look where this picture is embedded in the article topic [http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox#Selecting_history_items Selecting history items]
* http://kb.mozillazine.org/images/Fx3_history_sidebar_selections2.png
Selecting, viewing, and searching the sidebars and library lists is explained in both articles previously mentioned.
Multiple selection is something built-in to a lot of applications and into all browsers, and yes you guessed correctly the favicon it the thing to the left of the bookmark and that is what is is called in all browsers. And if you look at selection you will find that it matches what you asked for, especially if you were to do a search from the search bar on the bookmark or history sidebar. But there is also no problem opening up a single bookmark or history item into a new tab, with either Ctrl+click or Ctrl+Shift+click in the area to the right of the favicon either.
However I would suggest making a change to your configuration options so the the same keyboard shortcut is used from a link and from your bookmarks. See those keyboard shortcuts in the following along with the footnotes just below the table for them in
* http://www.mvps.org/dmcritchie/firefox/keyboard.htm -
How can I link iTunes Match to my proper Apple ID? I have two ID's and my phone accesses iCloud with the proper ID but it insists on trying to access iTunes Match using the wrong ID so I get the message that I'm not registered for iTunes Match.
The iCloud and iTunes Store account ID are not the same thing. They can be different although some folks, like myself, do have the same Apple ID for all the Apple services. Go to Settings > Store and enter the exact same iTunes Store account ID you used to purchase iTunes Match. Be aware you can only switch Apple IDs on an iOS device every 90 days.
-
I have been passed from pillar to post by apple to find out if my nano version1 is on the recall list. But as of yet I still can not find or get a answear. Can any one help me out please.
Many thanks. I have used this link all week a few times a day and once I have put in all the details etc and press submit I just keep getting a error on this link message. I have been to customer support and redirected to a Greek site then a Dutch site!!! Strange but true. I have also gone to the support link for my registered products clicked on the iPod nano I have and the support says it is out of support and I would need to pay xxxx to have a new warranty. I know this but the nano will be sorted outside of the warranty if it is one that has the faulty battery. So where do I go now. Arrrrr I thought this would be so simple. Thanks anyway.
-
I used "adjust date and time" and"modify original files" to correct the time of photos taken on a camera used in Peru which was set to UK rather than local time. which is 6 hours behind. This was to bring them into line with shots taken with other cameras set to local time. This was using iphoto 08 on a Mac. I then synced to my iPad. The photos stayed in the correct order in photos but in iphoto (iOS version) the original dates appear (the camera dates) and so the photos are out of chronological order again. This looks like a bug but is there a fix?
don't know what you mean by "write to master" but speculate that it means modify the original times, in which case the taken times on the camera should no longer be present
No,I meant your using the option "modify original files" will do exactly that - change the capture date original master files stored in the iPhoto library. Only when you do that, the "date modified" of your original files will be changed as well, and it will now be the date of your manipulation of the capture date.
Oh - I hadnt considered that possibility - but of that were the case, why don't my manipulated photos go to the end of the sequence as I have done all the manipulation after the end of the holiday??
In photos the synced album maintains the chronological order which I set up on the mac by modifying the originals, as you said,
That is what the linked article is describing: "some apps may sort your photos in the order you specify in the app (such as iPhoto or Aperture"
The problem I have is that, in the album, iphoto (ipad) sorts them differently to both iphoto (Mac) and the photos tab on the ipad
In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
"on ipad this is the Photos tab" - but this displays as per the original sequence ignoring time adjustments - the manipulations seem to be ignored (but are reflected in the album in the photos tab) and the photos tahat have been modified stay in their original positiom - they don't get put the end
Because the library uses a different date - the date modified - the date of the last time the file has been changed in any way - any editing you do to your image, including adjust date and time will change the "date modified"
This may change the sorting of the database but it appears not to influence the order in the albums
In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
So how can i get my photos in date and time order in an album in iphoto for ipad?
Thanks for your help -
when i log in to this web site it opens the game screen. when i then want to go to a different location in the game. it resets back to log in screen again.
but it works ok on all other sites.
== URL of affected sites ==
http://s3.travian.co.uk/dorf1.php"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?
Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
boot method: static
IP address: the address you chose in 7)
mask: 255.255.255.0
gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
click +
in the add menu click IP
enter your IP (from step 7)
make sure the Protocol is IPP
Name the printer and set its location
Go to Use field, in the pull down menu select "Select Software"
Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
Click +
Select your printer
Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done. -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
Is there any way that I can have songs in an iTunes Playlist without having the songs play in my regular music list. For instance: can I have a Playlist of Christmas songs without having them play in the routine shuffle of my music library? Thanks -Rog
Select the songs, press CTRL+I to Get Info, on the Options tab set Skip when shuffling to Yes.
If you want to the hide the songs from your main music view you could consider changing the media kind to audiobooks or podcasts if you don't mind the side effect of them showing up there instead.
tt2 -
I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?
I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td> -
Hi there, I made the monthly payment for the Adobe apps, i managed to download Illustrator and Photoshop but can't seem to download Indesign. It says that "file seems to be corrupted... try later". How do I solve this problem?
Hi shuster9,
It seems the downloaded setup for InDesign has got corrupt.
Could you please clear the TEMP from your computer and then retry.
Thanks,
Manish Sharma -
I use Links alot in my web surfing, dragging the icon in the address bar to Links. I can't seem to find anywhere that allows me to search those Links. I can't find a folder for them on my hard drive to search .. Help!
You can get Firefox 3.6.16 here:
http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox -
I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I
I recently purchased a new Logitech Webcam and can't get it working on the site that I use. I can see myself on the small screen but can't get it to transmit to the person I am camming with. Can someone help me with this, it is very frustrating to say the least, I have tried everything I know how to do.
Thank YouI used to use Internet Explorer, but can't get on it now so I use Google Chrome.
Thank You: Donald Smith
Mike M <[email protected]> wrote:
Mike M http://forums.adobe.com/people/C+F+McBlob created the discussion
"Re: I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I"
To view the discussion, visit: http://forums.adobe.com/message/6318810#6318810
Maybe you are looking for
-
Firefox 11, windows 7 Sync used to work normally, but now, in info, it reads : services.sync.autoconnect I checked in about:config and services.sync.autoconnect is set to true. In the windows option/sync, there is no link and no button for set up or
-
I am using the Bacbkberry desktop 5.0.0.11 with Outlook 2007 12.0.4518.1214 Vista Home premium 6.0 SP 2. While trying to configure the Desktop manager with outlook, I get the following message: Folder is no longer part of the system data source or t
-
I have a nano with 500 songs that was synced with my old computer that crashed. Bought a new computer, now my music is not in my iTunes library. I did the share thing but it didn't work.
-
IPhone Remote - iPhone is not able to connect with my library
Hi, after searching the internet for a solution, i hope one of you guys can help. Well, when i start Remote on my iPhone iTunes detects the Device, and im able to enter the code in iTunes. But when im trying to connect to my library, my iPhone just w
-
Hi In my application i am using a html to pdf converter tool. And this conversion is done running a command like Runtime.getRuntime().exec(runCommand); // where runCommand is my command to convert the provided html to pdf. Then i need to open the cre