I'm on W7. How do I install Arch on a usb stick via Virtualbox?

I want to make a bootable USB arch install I use on computers i don't trust and other such case scenarios.
I get internet from my phone via wlan so i need to use Virtualbox to take andantage of it.

https://wiki.archlinux.org/index.php/Mo … al_machine
Leave out the autodetect hook from mkinitcpio.conf, which tailors your initramfs to the specific hardware.
And maybe also use plain old vesa, instead of a specific video driver.

Similar Messages

[SOLVED] Install Arch Linux on USB Stick!

So, here is the deal. I want to install Arch Linux on a USB Stick so I can plug it at any computer and have my system... with me
I've had a little bit experience with Arch so I know a few things about it... used it for a few months before on a real system.
My USB stick is a HighSpeed 17-20 MBPS and it's 16 GB capacity.
So how do I do it?
Last edited by 1lj4z1 (2012-04-05 07:25:53)

I'm using occasionally Arch installed on HDD-USB, I've just added usb hook to mkinitcpio.conf and removed autodetect (more modules=more hardware supported). So far it worked on 3 different computers (all of them have one main HDD so no grub issues, but it's no biggie if it doesn't boot right away, you can always edit grub on-the-fly by pressing "e")
About USB stick: installing on USB stick is not the same as running it in LIVE mode! Consider yourself warned.
If you just install it you really should read about SSD optimizations because USB flash cells also have limited read/write cycles (actually is less robust and sophisticated than SSD). Something to look at: noatime mount option, disable swap if not necessary, profile-sync-daemon and so on...
1lj4z1 wrote:Well I don't need to chroot, i am running it live. I'll see about mkinitcpio.conf but I can't understand what you mean rebuilding initramfs? What is that exactcly?
It means if you fiddle with mkinitcpio you should run:
# mkinitcpio -p linux
afterwards or bad things will happen
Last edited by masteryod (2012-03-27 15:37:13)

Having trouble installing Arch Linux to USB key

Hello,
I have read the wiki article, but it doesn't answer my question. I am having trouble installing Arch to a USB key (8GB Sandisk Cruzer). I installled GRUB correctly, it booted, but the flash drive was write-protected. In the fstab file, I have the defaults and noatime flags in there. I have never experienced an error like this, and I don't know how to fix it. I have tried to reboot into the Arch CD and mounted the USB, but it just stalls and displays no output. Obviously, if I boot into my USB (you can still boot into it), and do "nano /etc/fstab", it says that I cannot write. In case you were wondering, I am using the root user. Thank you for all your help!
EDIT: I have Syslinux, the kernel parameters is RW. If I run mount -o remount,rw /dev/sda1, it tells me something like:
ata3.00: status: {DRDY ERR}
ata3.00: error: {IDNF}
end_request: I/O error, dev sda, sector 21
Buffer I/o error on device sda1, logical block 0
EXT4-fs error (device sda1): ext4_remount:4665: Abort forced by user
I did NOT hit CTRL+C.
Last edited by aqua123 (2013-09-07 02:01:30)

I'm a nub, and I think I'll piggy back of aqua's post. Perhaps we have the same problem
I have an Asus UX31A with Xubuntu (with grub) currently installed. I created the bootable USB as per the Arch Wiki UEFI bootable usb page. I can boot into the main prompt where you can choose "Arch Linux Iso", "shell v1", "shell v2" and "Default prompt."
Choosing the first option (to get to the the command prompt and begin installing) makes the screen flash once, then just hangs black. Before the flash I think I see three text lines in the upper left corner, but they flash so fast I can't read them.
Choosing either of the shell options presents the error:
"Error loading \EFI\shellx64_v1.efi: Unsupported" (replace "v1" with "v2" for the other option)
Any thoughts?

How to make linux bootable off a usb stick on mac

Guys i was wondering how to make linux bootable off a usb stick on mac, since i dont have a optical drive in my mac, plus i need it for university

I have the same question, but parsed differently. What people have tried answering here is:
how to (make linux (bootable off a usb stick on mac))
What I'm trying to find is:
how to make ((linux bootable off a usb stick) on mac)
That is, I don't want to boot from the usb stick on my mac; I want to write an ISO to a usb stick that's plugged into my Macbook Pro (Mavericks), then carry the stick to a different machine (several discarded Windows boxes in fact), plug it in there, and watch it boot on that machine. I've done a bit of googling, but everything I find talks about making USB drives with content that can be booted on a Mac. What I'm wondering is if it's possible to write to use my Mac to write bootable USB gadgets that work on other machines that aren't running OSX software.
Anyone know if this is discussed anywhere? If not, what's the right forum to ask it on? And how do I ask it so that I don't get yet another explanation of how to make something that will boot on my Mac?
I have several linux ISOs waiting. Actually, I could do the job on one of several available linux boxes. But I'd like to do it on my portable laptop, which at the moment is this Macbook Pro.

How do you install an iOS update on iPhone via iTunes after previously downloading it

How do you install an iOS update on iPhone 5 via iTunes after previously just downloading it

Hello Myyster,
Thank you for using Apple Support Communities.
You can use the following article to install the iOS update on your iPhone:
Update your iPhone, iPad, or iPod touch iOS software
Regards,
Jeff D.

How do I install Yosemite on a USB hard drive

I need to understand how to install Yosemite on a USB hard drive

Install it as normal, except that you select the USB drive when asked where you’d like to install it. The volume you’ll be putting it on needs to be formatted as Mac OS Extended (Journaled).
(115417)

How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

How can I install Arch Linux on a software raid?

Hi Guys, I've been at this for 3 days now and I can't get it to work. Basically I have 2 500GB SATA HDDs and I want them both on a raid1 array. I had it working on Ubuntu with no issues but the installer did all the work for me. I have attempted to follow the instructions on the wiki for Raid and LVM but I quickly get lost and I don't understand the LVM stuff. I managed to get 2 arrays up (md0 for /boot and md1 for /) but I was contently running into errors trying to install grub. In my last attempt I somehow managed to get grub installed on /dev/sda and /dev/sdb but then when I reboot the system it fails to mount /dev/md0 or /dev/md1 these raid devices don't appear in the /dev/ directory and I cannot bring them up manually. I have been all over Google and I can't find a comprehensive guide to setting up a raid 1 array and installing Arch. If anyone can direct me to useful instructions or layout the procedure for me I would really appreciate it.
Thank You.

This is genius, sheer brilliance. When I wanted to raid my Ubuntu install I specifically wanted to install a new HDD and just raid it with my existing disk but I had to download and alternate install CD and re-install the OS. I searched all over the net for an alternative and could not find anything. It's baffling that I had to start a thread to find such an insanely useful utility. Unless I'm taking the wrong approach. I mean, doesn't everybody raid if they can? Is there a better way to backup your disk? Why is it so difficult to find any useful information about raiding your disks? ... but I digress. Despite the fact that nobody else seems to know about this tool I know about it now and it seems to be the key to solving my problem. But I still have one problem. I have installed Arch on /dev/sda1. I downloaded (with wget), compiled, installed, and ran raider. I followed the on-screen instructions to the letter. When I swapped the disks and rebooted. I get pass the grub screen and get this error during boot.
Waiting 10 seconds for device /dev/md1 ...
Root device '/dev/md1' doesn't exist. attempting to creat it.
ERROR: Unable to determine major/minor number of root device '/dev/md1'.
You are being dropped to a recovery shell.
Type 'exit' to try and continue booting
/bin/sh: can't access tty; job control turned off
[ramfs /]#
I cannot type anything at this prompt. No response from the keyboard. I'm so close to getting this to finally work. Dose anyone know what might be going wrong.
Thank you guys for all your help.

Installing Arch Linux on USB key: error while booting

Hello,
first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
Waiting 10 seconds for device /dev/sdc/
Root device '/dev/sdc' doesn't exist. Attempting to create it.
ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
/bin/sh: Can't contact tty; job control turned off
[ramfs /]#
To summarize I'll show you my conf files that could help you to resolve my problem:
/etc/fstab.conf
/dev/sdc1 /boot ext2 defaults 0 1
/dev/sdc2 / ext3 defaults 0 1
/dev/sdc3 /home ext3 defaults 0 1
So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
/etc/mkinitcpio.conf
HOOKS="base udev usb autodetect pata scsi sata filesystems"
I've added to here, "usb" to the hooks
installed GRUB on my sdc, here is the menu.ist:
# (0) Arch Linux
title Arch Linux (USB)
root (hd0,0)
kernel /vmlinuz26 root=/dev/sdc ro vga=773
initrd /kernel26.img
So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

1. What I did is re-installing entirely from my installation disk or USB to test out different setting in my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
2. Yes, same error.
3. Tested out by-id/by-path and uuid = no difference
4. Didn't know about larch, it seems to be a nice tool, I'll check it out

Installed Arch on external usb drive: Drive errors after reboot

I installed Arch on my external usb hard drive and everything seemed to be working fine. After rebooting though, I had a bunch of filesytem errors (ext3) and the system was unstable. I am guessing that this has to do with the unloading of the usb modules at shutdown. If this happens to early, then the root drive doesn't have a chance to shutdown properly, hence the filesystem errors.
Anyone know how to solve this?
Thanks!

EtreCheck looks at your log files for any kernel I/O errors. That is what it is reporting. EtreCheck just reports what it finds and tries to avoid judgements exception the most extreme cases. The drive might be OK. I am seeing more reports of this than I would have expected. It may just be a problem with Yosemite. It really prefers SSD disks in all cases. On my own machine, I have seen a slow external drive exhibit classic failure symptoms and sounds when connected via USB2. But then when I switched to FW800, it was fine. Other people are reporting that when they downgraded back to Mavericks, their disk errors went away.
So, I don't have a good answer for you. The drive might be bad, and it might be fine. Yosemite is definitely having problems with it. You may experience performance problems with that drive attached.

I don't understand how to put the core files on usb stick

I read the instructions here http://wiki.archlinux.org/index.php/Ins … _USB_stick but I am not sure how to do this I tried this way ( using cmd prompt on winxp x64) dd if=C:\Documents and Settings\Administrator\My Documents\Torrents\archlinux-2008.06-core-x86_64.img=/dev/sd[F]
but I get an error saying that dd is an unrecognized command, I have also downloaded Flashnul but I am not sure how to use it if I type in anything I cannot execute it because as soon as I push the enter key Flashnul quits. so could someone explian to me how to do this please

jo3 wrote:
dd is a unix command.
I have not used flashnul in a while so IIRC first plug in your usb stick and type "flashnul -p" at a command prompt to get a list of devices. Then type "flashnul flash_device_number -L archlinux-2008.06-core-x86_64.img" to copy the img to the device.
HTH
-jo3
hank you for your reply.
Well Iguess flashnul isn't working properly because when I type in "flashnul -p" it just quits.
I installed Cygwin and have tried to install it that way but I was getting errors saying no such file or dir.
Well it ended up being that my usb stick was "f: I kept trying dd if=archlinux-2008.06-core-x86_64.img of=\\.\f:Kingston"and not "f: I kept trying dd if=archlinux-2008.06-core-x86_64.img of=\\.\f"
I am thinking that the The Cygwin Way
Make sure your cygwin installation contains the dd package.
Place your image file in your home directory, in my case it is:
C:\cygwin\home\John\
Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:
dd if=image.img of=\\.\[x]:
where image.img is the path to the img file within the cygwin directory and \\.\[x]: is your USB device where x is the windows designated letter, in my case "\\.\d:".
Note: This will irrevocably delete all files on your USB stick, so make sure you don't have any important files on the stick before doing this.
should say that for noobs like me

Cannot install windows 8 using usb stick on G400s FreeDOS version

I'm having some difficulties to get windows 8 installed on this laptop. is there any secrets or tricks on BIOS that I'm not aware of?? I have installed windows 8 on many laptops using same pendrive without having trouble previously.
I have tried legacy mode and UEFI mode/boot without any luck

hi wayne07,
Thanks for using Lenovo Community Forums!
Inside BIOS
    Under Boot Tab
          Change Boot mode to Legacy
           USB Boot should be enabled
    Under Security
          Secure Boot Has to Be disabled
In case the options above are grayed out in your BIOS, Got to Exit Tab and Change OS Optimized Default to Other OS
and check the options again.
Once All are Set Make sure to save all changed by hitting F10 and enter for Yes
    After Hitting enter It will Restart and You have to keep on tapping F12
       this should pull up the Boot Menu letting you select where to boot. You should have now your USB Stick as an Option.
Let me know your findings
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Installing Arch on a USB Key Partition

I'm new to Arch Linux, and installed it on a partition on my USB Key to try it out (it's cool!.... so far). One problem though. It's an 8GB drive with two partitions. I installed Arch on the first partition (2.5GB) and the rest is for storage. This is fine on computers that run Linux, but Windows only recognizes the first partition and does not see the storage partition.
Is there a way I could copy my entire Arch filesystem so I could reformat my USB Key with the partitions in the correct order? I was looking into Partimage and CloneZilla. I am also open to other solutions.

Clonezilla worked fine! For anyone else who wants to restore an image of a partition to a different partition, make sure you read this:
http://drbl.org/faq/fine-print.php?path … tition.faq
Last edited by zangderak (2011-09-10 01:19:20)

[Solved] Boot process hangs for installed Arch and installation usb

Hi. I've been using Arch Linux for around 6 months now and I'm in love with it. It is now my primary OS. However, I might have done something or performed some update, and I can no longer boot into Arch. The boot process hangs right before it should show the login screen (I'm using Gnome 3.6 with GDM). I see the following messages on the screen:
Loading Linux core repo kernel ...
Loading initial ramdisk ...
/dev/sda3: recovering journal
/dev/sda3: clean, 330610/1749664 files, 5585671/6996827 blocks
And then it hangs right there. I have to hard-reboot after this.
I then tried to boot using the Arch Linux Installation USB (archlinux-2012.12.01-dual.img), which also hangs at a particular point, before it should show me the prompt. I took a picture of the screen where it hangs: Screen Capture. This is an issue with just my laptop, because the USB boots just fine on another laptop I tried.
I also have Windows 7 and Ubuntu 12.10 installed on my system, and I'm able to boot into both of them.
I have 2 hard drives: /dev/sda is a 120GB SSD, and /dev/sdb is a 500GB hard disk. My partitions are as follows:
sda1 - Windows 7 100MB System Reserved Partition (boot flag enabled)
sda2 - Windows 7 OS
sda3 - ArchLinux (boot flag enabled)
sdb1 - Ubuntu 12.10 (boot flag enabled)
sdb2 - Just data
I ran bootinfoscript and below is the output:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 99 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 99 for .
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Mounting failed: mount: /dev/sda3 already mounted or sda3 busy
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.10
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 178,466,084 178,259,237 7 NTFS / exFAT / HPFS
/dev/sda3 * 178,466,085 234,440,703 55,974,619 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 20,948,759 20,948,697 83 Linux
/dev/sdb2 20,964,824 976,771,071 955,806,248 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/mmcblk0p1 6665-3162 vfat
/dev/sda1 CA6A20CC6A20B75B ntfs System Reserved
/dev/sda2 1EE242D5E242B137 ntfs
/dev/sda3 65db0c59-9f04-46f1-975d-8a4c28132137 ext4
/dev/sdb1 bb9818db-ce7c-43a4-8ad5-8d3702001aed ext4
/dev/sdb2 3C2E3A4E2E3A0206 ntfs
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/mmcblk0p1 /media/dhaval/6665-3162 vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
/dev/sdb1 / ext4 (rw,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 13,37,73; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro quiet splash acpi_osi=Linux acpi_backlight=vendor $vt_handoff
initrd /boot/initrd.img-3.5.0-21-generic
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
menuentry 'Ubuntu, with Linux 3.5.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-21-generic-advanced-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.5.0-21-generic ...'
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro quiet splash acpi_osi=Linux acpi_backlight=vendor $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-21-generic
menuentry 'Ubuntu, with Linux 3.5.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-21-generic-recovery-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.5.0-21-generic ...'
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-21-generic
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-29-generic-advanced-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro quiet splash acpi_osi=Linux acpi_backlight=vendor $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-29-generic-recovery-bb9818db-ce7c-43a4-8ad5-8d3702001aed' {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
linux16 /boot/memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 bb9818db-ce7c-43a4-8ad5-8d3702001aed
else
search --no-floppy --fs-uuid --set=root bb9818db-ce7c-43a4-8ad5-8d3702001aed
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-CA6A20CC6A20B75B' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 CA6A20CC6A20B75B
else
search --no-floppy --fs-uuid --set=root CA6A20CC6A20B75B
fi
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sdb1/etc/fstab: ================================
# /etc/fstab: static file system information.
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=bb9818db-ce7c-43a4-8ad5-8d3702001aed / ext4 errors=remount-ro 0 1
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
4.564525127 = 4.901121536 boot/grub/grub.cfg 1
5.130507946 = 5.508840960 boot/initrd.img-3.2.0-29-generic 2
5.851592541 = 6.283099648 boot/initrd.img-3.5.0-21-generic 2
6.317649364 = 6.783524352 boot/vmlinuz-3.2.0-29-generic 1
4.965751171 = 5.331934720 boot/vmlinuz-3.5.0-21-generic 2
5.851592541 = 6.283099648 initrd.img 2
5.851592541 = 6.283099648 initrd.img.old 2
4.965751171 = 5.331934720 vmlinuz 2
4.965751171 = 5.331934720 vmlinuz.old 2
I tried adding nomodeset and acpi=off to the boot parameters, but the boot process still hangs. Please let me know if I should provide any other information.
Last edited by dhavalparmar (2012-12-30 11:45:25)

Ok.. So my Arch Linux randomly decided to work. I'm sure I didn't do anything between my last "not working" state and my current "working" state. Below are a few things I tried:
I thought of trying an earlier build of ArchLinux, and downloaded archlinux-2012.11.01-dual.iso and made a bootable USB out of it. It still hung.
I was getting error messages during Arch boot that the last access time for the disks was at a future date. I found out that Ubuntu was using localtime instead of UTC and screwing up my hardware clock. I fixed it, and thought maybe the time issues were causing the boot problem. But fixing time didn't solve my problem.
I chrooted into Arch from my Ubuntu install, ran 'sudo pacman -Syyu' and updated my Arch install.
I thought maybe GDM isn't starting up. I re-enabled the service using 'systemctl enable gdm.service'.
I removed OpenNTPd and installed NTPd. Enabled the daemon using 'systemctl enable ntpd'
None of the above solved the problem, and rebooting to Arch still hung the system. So I stopped fiddling with it yesterday. Today, as usual, I just tried logging into Arch.. And it just worked out of the blue. The solution to me is as mysterious as the problem.
I told this to my friend who introduced me to Arch, and this is what he said:
Damn it computers, you were supposed to be deterministic!

Install Arch in an USB Flash drive from an existing image

I want to minimize the amount of writes to the flash drive by avoiding directly installing Arch into it.
I would like to know if it would be possible to install arch into an small partition, configure it, and then make an image of it and dump it at the USB drive(like when creating the USB install).
Does it worth the while doing so?
Thanks!
Last edited by cristian.rosa (2009-03-05 14:41:11)

Sure. You could do that, then just rsync or cp -ax it onto the Flash drive and set up GRUB.

I'm on W7. How do I install Arch on a usb stick via Virtualbox?

Similar Messages

Maybe you are looking for