I'm only getting one quarter of a screen on Flash Player on Firefox.

Only the upper left quadrant of the Flash Player screen has content. The rest of the screen is either blank or the original static image. This occurs on YouTube and any website that has Flash Player content. Computer is a Macbook Pro Retina using OSX 10.8.4. I've uninstalled and reinstalled Flash Player (twice) and uninstalled and reinstalled Firefox. The problem doesn't occur when I'm using Safari.

The below bug wasn't the relevant one. The correct bug is: [https://bugzilla.mozilla.org/show_bug.cgi?id=903296 903296 – With hardware acceleration off, Flash displayed only in the top left quarter on Mac OSX].
'''''Earlier Post:'''''
This has been submitted to the bug tracking system this morning: [https://bugzilla.mozilla.org/show_bug.cgi?id=907792 907792 – Embedded YouTube videos only display 1/4 of the video on Retina MBP/OSX].
A note regarding the bug tracking system: If forum members can contribute to the development, please feel free to pitch in. Otherwise, it's generally not helpful to add comments to bugs (unless there is a call for test cases), but you can register on the Bugzilla site and "vote" for them to be fixed. See:
* [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette]
* [https://bugzilla.mozilla.org/page.cgi?id=voting.html Voting]
The first comment in the bug reports:
<blockquote>If I disable HiDPI support by setting the gfx.hidpi.enabled pref to -1, then the embedded videos are displayed correctly.</blockquote>
If you want to try this, the steps are:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''gfx''' and pause while the list is filtered
(3) Double-click '''gfx.hidpi.enabled''' and edit the value from 1 to 0 or lower (e.g., -1). I don't know whether this works immediately or you need to exit and restart Firefox in order to see the effect.
According to a comment in the source code, these are the possible values for that preference (must be a whole number with no decimal):
// gfx.hidpi.enabled is an integer with the meaning:
// <= 0 : HiDPI support is disabled
// 1 : HiDPI enabled provided all screens have the same backing resolution
// > 1 : HiDPI enabled even if there are a mixture of screen modes

Similar Messages

Mt iPhoto library has disappeared from my laptop after syncing my new iPhone with the laptop. I now have a new iPhoto library with no photos. I have tried pressing option when opening iPhoto but I only get one library option and can't find my old one

My iPhone4s was recently replaced by apple due to grey out on wifi. when I went to sync with my laptop my iPhoto library disapeared and I was left with an empty library. I cannot find my old library on my laptop. I only get one option for a library when i open iPhoto while holding down option key. I am worried I have lost all my photos. there seems ot be no iPhoto library on my iCloud either.
Any suggestions?

Syncing with an iPhone should not delete the iPhoto library on your mac. It only will upload photos to the phone (iTunes sync) or import (connecting by USB). How did you sync your phone?
TD, do you know of any way, that a sync could delete an iPhoto Library on a Mac?
You may have opened a wrong library or may be working from a different user account. Are you using the same user name and Apple ID as before?
How have you searched for iPhoto libraries? Have you searched with Spotlight?
Each iPhoto library contains a file called "Library6.iPhoto" - even if your iPhoto library should no longer be recognisable as photolibrary, this file should be found:
Type "Library6" into the "Spotlight" search field in the upper right corner of your screen, like this:
When you see a list of files, select one of them and hold down the key combination ⌥⌘ to reveal the path to the file.
If Spotlight cannot find the file in the packages, use "FindAnyFile" http://apps.tempel.org/FindAnyFile
Regards
Léonie

Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

I use tag <mm:treecontrol> to create tree in DWCS4 on Mac OS.
When I select many nodes in tree, but I only get one node by method: selectedNodes.
codes of created tree as following:
<mm:treecontrol name='tree' size='20' multiple noheaders>
     <mm:treecolumn state='hidden'>
          <mm:treenode value='A' state='expanded'></mm:treenode>
          <mm:treenode value='B' state='expanded'></mm:treenode>
          <mm:treenode value='C' state='expanded'></mm:treenode>
</mm:treecontrol>
Who can tell me reasons?
Thanks!
comments: if don't use tag <mm:treecolumn>, tree will not show on Mac OS.

Hi macbig,
I finally got to look at my sister's computer. The HDD "Repair Disk" found missing threads, missing directory records, etc. and ended with:
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-
up files.
Then, I tried "Verify Disk" and it found invalid volume file count and ended with:
The volume Macintosh HD was found corrupted and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk
I guess running Apple Hardware Test is not going to happen. :/
I've ordered online a new 2.5 disk, make a Maverick boot USB, and start from scratch. Do you have any other suggestions?
As for the corrupted old hard drive, do you have any suggestions of how to get out the data somehow?
Thank you so much!

Recording stereo audio and only getting one side - what gives?

Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

Is Universal Track Mode enabled?

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I g

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I get clarification on the $29.99 offer and who it is available for. Thank you

Hi there
The 29.99 introductory offer is for existing CS customers ie customers with a CS3-CS6 product (suite or individual product).
Hope this clarifies matters.
Thanks
Bev

4 domains names can only get one to work

4 domains names only 1 working
i can only get one to work and now its crossed with other domains
example i have jcsrealty.com all ready working fine. i want to post customxcycles.com on a new site but it cross over on to jcsrealty.com. so when you go to jcsrealty.com it pulls up customxcycles.com
and no jcsrealty
please help
thanks

Welcome to the Apple Discussions. Are you publishing to a MobileMe account? Is each site in its own domain file? If yes to both and you're using the CNAME method of domain name forwarding for the first site you published the last published site by iWeb will be the one that gets open when you enter your domain name. All additional sites must use the simple domain name (URL) forwarding.
There are a couple of ways to get around that:
1 - use the simple domain name (URL) forwarding for every one of your sites. That means pointing each site to its respective address on your MMe account: http://web.me.com/YourMMe_Account_Name/SiteName/.
2 - add a dummy site in each of the domain files as described by Wyodor in this post: Re: Is it possible to have multiple sites when using ur Domain name.
OT

Only getting one channel of audio with mic HELP

I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

You're welcome.
The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

I can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear

# Question
i can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808

TS3367 When using facetime I only have three quarter of the screen and not the picture of myself how do I fix

When using facetime I am only getting three quarters of the screen and the small picture of my end is not showing. How do I fix?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

M trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

m trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

OS X Mountain Lion: Set up a printer to print wirelessly
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

HT202681 Is Flash Player only for Safari? Do I need Flash Player for Firefox?

Is Flash Player only for Safari? Do I need Flash Player for Firefox?

A Flash tip to help avoid security issues later: There are known scammer who fake a "Flash is out of date" pop-up that leads you to a site that installs malware or can compromise your private data. If you see a pop-up in FF saying you need to upgrade Flash, the only safe thing to do is go to this official Adobe site:
https://get.adobe.com/flashplayer/
and follow the downloads instructions there. It will show the currently available version. You can quickly tell what version is on your computer by doing System Preference > Flash Player and selecting the "Updates" tab.
Do NOT choose to update Flash from any pop-up. Here are several articles with more info on the "Fake Flash" issue:
http://www.thesafemac.com/?s=flash&submit=Search
Fake Flash pop-ups commonly contain grammatical or spelling errors. One common one is "Failure to install this update may cause your computer to crush." Using only the official Adobe site I linked plus checking your current version via System Preferences will avoid your having to figure out if a pop-up is fake.

Mac OS X version 10.6.8. I keep getting "blocked plug-in" messages. Adobe Flash player update won't upload. Suggestions?

Mac OS X version 10.6.8. I keep getting "blocked plug-in" messages. Adobe Flash player update won't upload. Suggestions?

You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

Flash media server enterprise 4.0 allowing no one but my site to use flash player

so i was getting people embedding my player to there site and stealing my thunder.. so i changed allow all to my domain and well i cant connected with fme how to correct this thanks

i tried still no go but here is a screen shot of fmse
Date: Tue, 4 Oct 2011 08:36:36 -0600
From: [email protected]
To: [email protected]
Subject: Flash media server enterprise 4.0 allowing no one but my site to use flash player
    Re: Flash media server enterprise 4.0 allowing no one but my site to use flash player
    created by SE_0208 in Flash Media Server - View the full discussion
Wait a minute - your URI should be rtmp://ip/vod.mp4:sample1_1500kbps.f4v and i think your code should be as below (made "live" to false as its VOD file) <!start_raw>     flowplayer("player", "flowplayer-3.2.7.swf", ,         // streaming plugins are configured under the plugins node        plugins:         }    });</script><!end_raw> try and let me know
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3953024#3953024
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3953024#3953024. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Media Server by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I'm only getting one quarter of a screen on Flash Player on Firefox.

Similar Messages

Maybe you are looking for