I'm playing galaxy empire online game,when I want to buy any dark matter,but can not,n ask me to see I tunes support,do you know why?I have try many times,n have the same result..thx
I'm playing galaxy empire game,when I try to buy dark matter,It cannot,n ask me to see iTunes support,...what should I do?I have try for many times,but I've got the same result...plz help me,thanks
Hi Julius,
As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
Peace,
Jeremiah
Similar Messages
-
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
How you create a group to send many txt msg at the same time?
How you create a group to send many txt msg at the same time?
The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.
-
Details:
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problemرائد wrote:
please help me to solve problem
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i have 292 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem
You need to contact iTune Support
http://www.apple.com/support/itunes/contact.html -
i have 99 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem agen !!
halep meIf I were you, I would "Contact iTunes support to complete this transaction."
http://apple.com/emea/support/itunes/contact.html -
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problemYou need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
hi...i have a real problem i keep getting in game when i want ot buy something ...ur purchase could not be for assistance contact itunes suppocompleted rt any help plzzzz????
Slow down, take a deep breath and start over. Use complete sentences so your thoughts are lucid.
-
Details:
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problemClick here and request assistance.
(88486) -
I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?
Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
Many thanks. That issue will be causing the iTuneshelper error message too.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
have the new iphone 4s and the camera shutter wont open so i can not take photos it is only 4 weeks old dose anyone know why?
Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?
The next step would be to restore the iphone as new in iTunes. If that doesn't work, make an appointment at the Genius Bar at the nearest Apple Store.
Best of luck. -
When I want to restore my IPhone 3G, it can not restore & show an Unkown error (1015). What can I do now?
Please see the quoted text below, taken from the Apple article you linked.
"Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state." -
I am trying to download and album off ITUNES but when I get to the billing site and attempt to purchase it, it gives me a message saying "Your Session has timed out." It gives me no other option that to try again and I just keep getting the same results. Anyone have any ideas on what I can do?
Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H. -
My iPhone is not showing that it is connected to wi-fi. My laptop is showing the wi-fi signal with a completely strong signal. I have turned the phone off & on multiple times, and have turned the wi-fi (on the phone) off & on multiple times as well, all with the same result. Help!!! Any suggestions?
Poof! It's working like normal! Thanks Lawrence! Guess I have to learn patience!
-
What i am trying to do is create a program that lets the user have a small conversation with the computer but i don't want to use "else" and list the possible inputs seperatley and have to write the same thing over and over again. does anyone know of a way i can list possible inputs together and have them lead to the same result?
Your script asks the question twice because that's what you tell it to.
The first line of your script asks the question:
display dialog "hey" default answer ""
then you define your lists:
set mylist to ("hi", "hey")
set mylist2 to ("sup", "yo")
Then you ask the question again. This time you capture the result in theanswer:
set theanswer to text returned of (display dialog "hey" default answer "")
The simple solution is to nix the first line of your script, since it serves no useful purpose.
Then, your logic on checking the answer is flawed. If you look at the script in a formatted/indented manner you'll see:
if theanswer is in mylist then
display dialog "what's up"
if theanswer is in mylist2 then
display dialog "dude"
end if
end if
where you can see that theanswer has to be in mylist for any of the rest of this code to run - that includes checking to see if theanswer is in mylist2.
You need to separate this, either into two separate if statements:
if theanswer is in mylist then
display dialog "what's up"
end if
if theanswer is in mylist2 then
display dialog "dude"
end if
or by using an else statement:
if theanswer is in mylist then
display dialog "what's up"
else if theanswer is in mylist2 then
display dialog "dude"
end if
In the first case both checks are performed. In the second case, the second check is only performed if the first one fails (i.e. theanswer has to NOT be in mylist in order for mylist2 to be checked)
Maybe you are looking for
-
Installing driver on windows server 2012 R2 in VAIO-VPCEH38FN model
Hi, Q1. I'm using Windows server 2012 R2. How can I install ethernet driver,Wifi Driver, Bluetooth driver etc in my VAIO laptop. can i install or not? Q2. can i install one Windows 7 and another Windows server OS in same drive? Please reply soon.. T
-
Iweb sites in app has disappeared
Hi, My iweb pages in the actual application have disappeared. Apparently they are still on my iDisk, but when I open the up iweb application, it's showing NOTHING, as if I never made any websites. Is there anyway to get this back? Can I get them from
-
hey guys. I have a class called Player, a class called Node, and a class called TurnTaker. The TurnTaker class uses both the Node class and the player class. All the files are in the same directory but i am getting an unresolved symbol for the method
-
Hi All, I amd currently developing an ALV tree program to capture the hierarchy of functional location. I managed to display the hierarchy in ALV Tree using cl_gui_column_tree. Now, i am working on double clicking the functional location and it will
-
Problem Updating 10.4.11 to 10.5.6
Just purchased a Family Pack of 10.5.6 to update my iMac from 10.4.11 to 10.5.6 prior to 10.6. When I start the upgrade process, I am told that my hard drive volume will need to be erased. I really do not want to erase. My iBook G4 running 10.3.9 pan