I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.
I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.
1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it.
Similar Messages
-
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
I have two Macs that won't back up to time capsule, says The backup disk image “/Volumes/Data/Douglas Chalmers’s iMac.sparsebundle” is already in use.
Please look over to the right of this page for the heading of More Like This.
There are multiple answers and solutions there. -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
Hello,
its been few days i keep recieving a message saying:
TIME MACHINE COULDNT COMPLETE THE BACKUP TO TC.
The backup disk image “/Volumes/Data/Krzysztof’s MacBook Air.sparsebundle” is already in use.
what shall i do?Tell Apple.
Apple - Time Capsule - Feedback -
My time capsule stopped backing up and the following error message popped up, The backup disk image "/Volumes/Data/iMac.sparsebundle" is already in use.
Any ideas how to troubleshoot?Have a look here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
-
I have restarted my computer, but still getting the same message.
Pull the power plug from the back of the Time Capsule, or pull the AC wall plug, whichever is easier
Wait a full minute
Power up the Time Capsule
This simple reset will fix the Mountain Lion bug about 95% of the time.
If not, see #C12 in Pondini's Time Machine --- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html -
How do I fix this message from time machine: The backup disk image “/Volumes/Data/Jim Linnell’s Computer.sparsebundle” is already in use.
Restart the computer and your Time Machine backup system.
See also from More Like This:
what do I do about this time machine error message? The backup disk image “/Volumes/Data/Paul Brandow’s Computer.sparsebundle” is already in use.
Time Machine gives following error message;- The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use. What does it mean? -
I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.
Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.
-
"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas pleaseThanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help -
My normally reliable Time Machine is giving following error message;-
The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use.
What does it mean and how do I deal with it?I have loaded it into ML using a great and free utility unpkg.. it probably works much the same as Pacifist.
Locate your downloaded 5.6 dmg file.. click it so you can see the pkg but don't bother opening it.
Download, install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the airport utility 5.6 pkg over to unpkg.. and it will create a new directory on the desktop.. named AirPortUtility56.. drill down to Applications, Utilities and you will find the unpackaged utiity.. drag it to your main utilities directory or just run it where you are.. -
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
Can't install iTunes on windows xp
I was given an iPhone 4 and needed to upgrade my iTunes to download on to it but iTunes said it couldn't connectto the upgrade. I tried to download iTunes 11 but all it would do was ask me if I wanted to save the file and when I clicked yes, Apple s
-
Hey I need some HELP!! Please, it's important...
Hi everybody! First post in here...well today I accidentally installed iTunes 7.6 pressing "software upgrade". Since I'm using OSX 10.4.8 iTunes 7.6 doesn't open: it pops out kind of "need the OSX upgrade for 10.4.9 or 10.4.10 up!!"...I can't upgrade
-
Acrobat x pro "license agreement" bug on opening
Hi I hope you can help find out how to get rid of this problem, it is urgent that I have access to acrobat documents for my work which is very busy at the moment. I downloaded and installed Acrobat X Pro as part of the CS6 Design & Web package purcha
-
Hi, I have created a blog using iWeb 08 -- it currently has about 50 entries and about a dozen photo pages, and I am getting ready to publish. I tried a publish to a folder so I could see that everyting was OK, and it created two questions: 1. I thou
-
How to make code immune to changes in (external) database names?
I wonder if there is a way to make code in one database immune to changes in names of other databases that the code uses. Essentially, what I'm after is something like an alias but not for a specific object in a database but rather for a whole databa