I'm running ableton live music software. It has performed beautifully for about a year, but now it is stopping and skipping frequently. The hardware checks out ok, I've been shutting down often, there's nothing open on the desktop....
Why will my macbook pro skip when I'm playing music? Plenty of memory, the hardware checks out ok. Do I need maintanence or to reload osx?
Hi Frederick,
Have you run background maintenance lately? Repair Disk?
Similar Messages
-
My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running. Does anyone know the cause & remedy please?
Your points match mine pretty well,though here are some thoughts:
1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
4. That matches my experience.
My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss. -
my iphone wonbt charge let it die but now it wont charge and it did the same thing after i restored it
Resetting the Logic Board
Resetting the logic board can resolve many system problems. Whenever you have a
unit that fails to power up, you should follow this procedure
before replacing any modules.
1 Unplug the computer.
2 Press the Power On button on the front of the unit.
3 Open the side access panel.
4 Remove the battery from the logic board.
5 Wait at least 10 minutes before replacing the battery.
6 Make sure the battery is installed in the correct +/-
direction.
7 Reassemble the computer and test the unit.
Cheers, Tom -
I downloaded the free trial for Adobe XI Pro but now I cant find it on my computer or figure out how to use it. The only thing I see that downloaded is Adobe Download Assistant. How can I access the program?
Assistanttolindsey the Adobe Download Assistant will download the installation files for Adobe Acrobat Professional XI. By default they are saved to your download folder. You can begin the installation process from there.
-
Hello i made a site using the 3 platforms: desktop, tablet, and smartphone but... on tablets and smartphones appears the desktop design, any idea why?
Vivek,
I've checked the "Redirect from Desktop" and after uploading the website into the hosting account, it still appears in the desktop version. Would you please take a look at this? I hope you can see what I've missed. Thanks.
Initial BC version during construction: Oklahoma Immigration Attorney- Jonny Randall. Immigration, Criminal, Divorce, and Bankruptcy Defense
Uploaded version into hosting account: Oklahoma Immigration Attorney- Jonny Randall. Immigration, Criminal, Divorce, and Bankruptcy Defense -
I just reinstalled firefox on my computer and the password feature to remember then worked for all my sites for a couple days and now firefox does not remember my username or password and I have remember password checked in the tool section. What can I do to correct this. Does it have anything to do with me having the setting to not remember any history?
Did you look at this? Should be helpful :)
http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered#os=win&browser=fx4 -
trying to update ipod touch 5th gen..it got downloaded but it wont install and now some of the apps wont open..im stumped
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Any thoughts? I've tried the reset thing, but the ipod is hust dead as soon as I take it off charge.
Sure does!
-
n
You can contact iTunes Customer Service on this Link
http://www.apple.com/support/itunes/contact.htm
They should be able to assist you... -
I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
Since downloading OS X Mavericks, my computer has been shutting down midway of starting up. Please help! The problem began after downloading the software free update. Now when I start my computer, it will starts up normal but when the desktop appears, there will be an error message that I shut down my computer because of an error and if I would like to open the applications that were open before the sudden shut down I should press continue. Then when I select continue, it will open up another communication window that my computer is restarting because of an error. Then the screen will revert to shutting down and restarting again. This has been going on now all morning. Can someone hlep me on how to resolve this issue?
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
i was updating my iphone 5 to ios 7 but i cancelled it by forcing a shut down as there was not much battery left so now its in restore mode and i cant restore my phone now it says error 3194 and ive tried the sudo code but it still doent work help?
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these steps for assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow the advanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2+ seconds and it won't turn back on. Should I replace the battery? It doesn't hold a charge either...
EmadJamal,
the battery won’t melt because of long connection to the AC charger, although that has the potential of reducing the battery’s life.
Do you have access to a second 60 W AC charger to test with your MacBook Pro, or access to a second 13-inch MacBook Pro against which your AC charger could be tested? -
I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?
What "everything" have you tried?
What exact version number (down to the last decimal) is your AE?
What OS are you using?
What are your other system specs?
When did it work last? What happened between then and now?
FAQ: What information should I provide? -
When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.
Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option. That has jump started iWeb for others. I could take a couple of tries.
If that doesn't work try the following:
1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iWeb folder.
Click to view full size
3 - launch iWeb and try again.
OT
Maybe you are looking for
-
My iphone randomly turned off out of nowhere. I was getting dressed, my phone was working one minute then literally the next it syopped now it wont charge i cant turn it on however the phone is on cause i called it and it rang. What to do? help pleas
-
What's my video adapter's IO address and interrupt level?
I installed solaris8.0 for intel platform. When I logged in as root, the graphic didn't appear normally. I ran the program KConfiguration, and didn't find the item named "Standard VGA 256 colors". And the program let me input the video adapter's I/O
-
Create a procedure for SAE function by using trigger.
how to create a procedure by using triggers. we Have a job constant for the SAE function to trigger psuedo code SAE_ENG_DOC description: Engineering Documentation requirement. This should only trigger 1 time per job regardless of how many up issues r
-
How to translate Function text matching to fucntion code?
I try to translate Function text matching to Function code in GUI status? Is there any way you know how to solve it?
-
Hi, This is my query using oracle 9i. select NUMTODSINTERVAL(NVL(CLOSE_DT,current_date) - OPEN_DT,'DAY') from W_SRVREQ_D Result: NUMTODSINTERVAL(NVL(CLOSE_DT,CURRENT_DATE)-OPEN_DT,'DAY') 60 13:29:8.999999999 I want result as 60 only. Will remove time