I'm running an EMAC 10.3.9. Icon bounces in the dock but then quits. It has been suggested it is a Plug-in problem. Help
Firefox was working fine. Then 3 days ago it started this issue. Spoke to Apple and re-installed the 2.0.0.20 verison - no go. Always starts the same. Bounces in the dock then the top bar shows Firefox, and the list of columns: File Edit View - Bookmarks etc. Then just stops. Message appears: The application firefox -bin has unexpectedly quit. Asks do I wnat to send a message to Apple.
Apple suggests a P{lug-in problem. Suggestions. Rick
Try:
*http://thexlab.com/faqs/resetlaunchservices.html
* http://thexlab.com/faqs/repairprocess.html
See also:
* http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X
* http://guides.macrumors.com/Repairing_Permissions
Similar Messages
-
When I run iDVD the icon bounces in the tray but then is unresponsive
hi guys,
has anyone seen this before?
I run iDVD and it bounces, but then nothing. I tried to "open" a project using the pulldown at the top of my screen, but ...nothing.
advice? thanks!THANKS !! old toad, that was the trick. I never would have known that so I appreciate your help.
have a great day!
ps. Bengt, you are so right.. you have to have plenty of free disk space for these things to work. I keep that in mind. -
How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?
Hello, and welcome to Apple Support Communities!
Try entering four zeroes. -
My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?
Are these the instructions you followed:
http://support.apple.com/kb/ht1670 -
im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?
I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode. -
I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?
BDAqua wrote:
....but some other new Macs will boot frome a clone of 10.6.8...
Only with a whole lot of effort and instability. As the new Minis have
hardware (HD4000, USB 3.0, etc.) that is totally unsupported in old OSes.
The only option would be to see if it would work by installing in a virtual machine
running 10.6.8. I'm sure there will be some performance hit but whether it would
be enough to be unusable is the question. -
I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.
Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
The account details window of iCloud has been running all night. It should have loaded my music by now. What's wrong?
Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
Can the width of a report that has been run in the background be increased?
Hello Experts,
How can I increase the width of a report that I have run in the background so that it does not wrap text to the next line?
I have been running the same HR report successfully in the background for many months. Today I ran it with the same parameters that I've always used and when I retrieve it from my Own Job Spool - System | Own Spool Request | Display Contents the last field is wrapped to the next line.
Thanks.
Regards,
JeanetteJeanette,
Thereu2019s another possibility if Tedu2019s suggestion doesnu2019t work. When you look at your spool requests, thereu2019s an icon on the toolbar next to the eyeglasses that looks like a yellow rectangular callout. Itu2019s called u201CDisplay in Maximum Widthu201D. Select the Spool no. to display and then press this icon. Shift + F4 is the shortcut.
Regards,
Howard -
My ibookG4, running 10.4.11 suddenly decided it no longer wants to print documents thru my HP officejet 6210 all-in-one printer. So far I've tried emails, excel and word all with the same result. The computer will start to process the print request (processing seems to take longer than previously) and then suddenly the processing stops and a red exclamation mark appears next to the printer image at the bottom of screen. When I pull up the printer utility it tells me the printer is "stopped". If I restart it, the process begins all over again until once again it stops. I have already deleted the printer completely from my computer and reinstalled the software fom the HP site. For some reason had a really tough time finding the correct print drivers on the HP site, but did finally locate them. I have not even attempted scanning during this (I see lots of people reported issues with that for the 6210), I would be happy if I could at least print again. I am connecting via USB. Is there some way to fix this?
Hi Evelyn,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US -
I made an account just for this. My macbook pro is extremely slow, but only some of the time. When I normally browse it isn't that bad, but using any flash application or playing any game results in a 100-400 (sometimes 350%) CPU usage of the flashplayer. When I play a game something called kernel_task or mdworker take up a lot as well. Here's my EtreCheck, if it helps.
EtreCheck version: 1.9.15 (52)
Report generated September 20, 2014 at 3:20:33 PM EDT
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:41:46
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (219.29 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Razer Razer Mamba
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.7) Support
[not loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) Support
[not loaded] com.logmein.hamachi (1.0) Support
[loaded] com.manycamllc.driver.ManyCamDriver (0.0.9 - SDK 10.5) Support
[loaded] com.razer.common.razerhid (1.6 - SDK 10.6) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
[loaded] com.anchorfree.ajaxserver.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
Launch Agents: ?
[running] com.razer.common.rzcoreengine.plist Support
[running] com.razer.mambaIIdaemon.plist Support
User Launch Agents: ?
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.6r636 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ? (this was when the game was not running)
64% LolClient
7% WindowServer
7% LoLPatcher
6% firefox
4% hidd
Top Processes by Memory: ? (same as above)
406 MB LolClient
270 MB firefox
111 MB com.apple.IconServicesAgent
49 MB WindowServer
45 MB Finder
Virtual Memory Information: ?
983 MB Free RAM
1.49 GB Active RAM
693 MB Inactive RAM
893 MB Wired RAM
525 MB Page-ins
0 B Page-outsHere is an example of high CPU usage by the way.
-
Receiving message "your Mac OSX start up disc has no more space available for application memory."
This has just started in past week, I removed about 6 apps from dock to see if it cleared it but message still appears. Mac is iMac 5 with Mountain Lion (10.8.4)
Would appreciate some help.
BarbThe message has nothing to do with available disk space. There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Under the old version of Mail, when an e-mail was read, the name of the sender was greted out so that I knew I had read that email. This does not seem to happen under the new Mail thaqt came with Lion. Help!?
Chuck Humphrey
[email protected]
303-997-2755Kirk,
Thanks again for your suggestions. No, I don't get an
error message. In fact nothing happens. My name and
key are typed in and from what I understand, once you
do that with a real key it directs you to the
registration page. When I get done entering the
information the window just sits there without any
button or option to continue.
QT Pro is already in the QT (non-pro) you installed and the key (which is a hash of your name in part) allows the Pro features to work.
No redirect, internet, nothing like that. As such many people have activated and think they haven't. Just look at the menu items and see if the "Pro" logo is shown next to a few (which are greyed out and not available without Pro). If not you are done. -
My macbook pro has been running really slow out of nowhere
Problem description:
Macbook pro is all of a sudden being extremely slow. Anytime I click anywhere and even whenever I start typing something, the spinning rainbow beachball appears for like 15 seconds before anything happens. And even loading applications and internet webpages also takes a long time. After the problem arose, I upgraded to Yosemite thinking that it would resolve the problem, but it’s still hasn’t changed anything. Just a few months ago I changed my HDD to an SSD, and my mac was working perfectly fine until a few days ago. What’s going on and how can my mac work like normal again? Thanks.
Below is my EtreCheck report
EtreCheck version: 2.1.6 (109)
Report generated January 16, 2015 at 3:26:40 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 323
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:25:35
Disk Information: ℹ️
Samsung SSD 840 EVO 250GB disk0 : (250.06 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Samsung 840 EVO (disk1) / : 248.83 GB (232.13 GB free)
Core Storage: disk0s2 249.20 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.pharos.notify.plist [Support]
[running] com.pharos.popup.plist [Support]
Launch Daemons: ℹ️
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
Caffeine Application (/Applications/Caffeine.app)
Spotify Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Support]
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% mds
5% WindowServer
0% fontd
0% AppleSpell
0% opendirectoryd
Top Processes by Memory: ℹ️
155 MB loginwindow
146 MB Google Chrome
129 MB mds_stores
103 MB Spotify
94 MB Spotify Helper
Virtual Memory Information: ℹ️
5.20 GB Free RAM
1.99 GB Active RAM
446 MB Inactive RAM
945 MB Wired RAM
1.16 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 16, 2015, 03:02:08 PM Self test - passedCheck that your third-party software is compatible with Yosemite: See App Compatibility Table - RoaringApps.
If you have anti-malware software installed please uninstall it.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Applications not in dock, but are running?
Preview, QuickTime Player, Grab, and maybe some other applications do not show up in the dock when all windows are closed but the application is still running. It gets really annoying having to force quit preview every time I open an image off an external drive. The fact that this problem has been there since Mountain Lion, and maybe in Lion as well, on every single mac I've ever had, tells me its not a bug, but an "innovative feature." The problem is, I can't imagine any advantage to it. It justs causes problems. Is this fixable?
Sparon,
it’s running Mavericks, and I didn’t do anything — it has acted that way since I’d installed 10.9.0 (on a fresh SSD), and I currently have 10.9.2 installed.
Where is the red X which you’d used to close an image in Preview? All that I saw were the red-yellow-green “traffic lights” on the left-hand side of the Preview title bar when I’d opened an image in Preview. When I click on the red “traffic light”, or select File → Close Selected Image, the image disappears, and Preview is still running, as I would expect. However, in my experimentation, I found that if I switch to Terminal right after closing the image, Preview disappears from the Dock, but the ps command (which stands for “process status”) under Terminal shows that Preview is still running — that disappearance from the Dock does seem like a bug, or at minimum unexpected behavior, to me. If I then go to the Applications folder in Finder and double-click on Preview, it becomes visible in the Dock again. Selecting Preview → Quit Preview from there still causes it to quit normally; the ps command shows that it is no longer running. (I tried this with images on both my internal disk and an external disk, and they behaved identically.) Despite the disappearance of Preview from my Dock, I didn’t need to force quit from Preview at any time.
Maybe you are looking for
-
There are about 8 songs on a playlist that are listed in the playlist library but when I try to transfer them to the playlist, it states that they can't be transferred because the original file could not be found. Then it asks, do you want to locate
-
Hello All. I have read loads of forums and tried numerous fixes and configurations, but nothing seems to work and I am extremely frustrated at this point. I have a client where I setup Server 2012 Standard with Exchange 2013. After reading best pract
-
My iphone showed up just fine on itunes. So did my ipad. Then my iphone stopped being recognized by itunes. Now when I plug it in itunes sees it as my ipad. Can someone help me to get it back the way it should be? Thanks.
-
"Object reference not set to an instance of an object" on stored proc.
So, I use VS 2005 with Oracle 11 rel. 11.1.06.0. I installed ODP for .net (ODAC 11.10621). but, when I call some stored proc wich was working previously, when calling stored proc: oProcAppendWebFolder2.Parameters("p_siteid").Value = vSiteID oProcAppe
-
Explanation of MB01 and generation of Goods Recipt
Hello Experts, This is my first exposure to BDC , i am totally clueless, and in need of some urgent help. Can someone be kind enough to explain, How TC:MB01 works in a BDC program where Goods recipts are generated based on the Purchase O