I'm running OS X, but I can't run Final Cut Pro 1.0 and appropriate upgrade

I recently purchased a Macbook with OS 10.4.6 on it. I have Final Cut Pro 3, but I can only install it via FCP1 and upgrade to FCP2 and finally to FCP3. However, when I try to install 1.0, it says that this system cannot support it. I can't seem to figure out how to run Classic mode either.
So, my question is, what are my options to run this software? (I really do not want to purchase the newest software.) Also, I know someone who has FCP3 full version (not an upgrade); would it be possible to install this software and use one of the serial numbers from one of my other software disks? Any help would be great.
Thanks!

FCE is more limited but depending on your needs it might be fine
check out http://www.apple.com/finalcut
why do you feel you need to download an upgrade
after FCP 4 (3-4 years ago) you no longer needed an older version installed just the serial number as they discovered the problem that you are running into now
DAVE

Similar Messages

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • What is my best hardware/software to convert vhs to digital so I can edit in Final Cut Pro X

    What is my best hardware/software to convert vhs to digital so I can edit in Final Cut Pro X?  Wondering if there is a solution under 100.00 or do I need to think a bit more. Thank you.

    Have been doing this for some time, my setup:
    I use an ancient "Symphonic" VCR player connected to an Elgato Eyetv Hybrid USB dongle.  That plugs into my G5 Mac, 10.5.8, which runs Eyetv software v. 2.5.3.
    Recording is dead simple after fiddling around a bit with software settings for channel, etc.  Start the player, hit "record" on the software and wait for the end.
    The recording is saved in some obscure ".eyetv" format with file size about 4 GB per hour of recording.  The software has export to a variety of formats including QT Movie which results in a substantially larger file size.
    Quality?  Well, it's viewable and usable for archive purposes.  I'm fine with it but more discriminating folks may want something better.  I end up burning the video on a DVD using iDVD and that's not the greatest anyway.
    There are various Elgato units available, and the Eyetv Hybrid seems to run bout $130.
    Hope that helps.

  • Can't Find Final Cut Pro with my admin user!

    It was there, but I changed the name from the person I bought the macbook15 from and now all the settings and apps are set default.
    Is there a way my main account (set to admin) can find Final Cut Pro (and maybe others) to appear on hard drive without having to use the old name and password?
    If I create a new user with the name of the original account is simply says "Username already used". In other words, If I am to use the old username, I have to change my main admin account and go through that all over again.
    Admin should mean, total control of the computer...
    Also does deleting/changing the original user actually delete programs?? It shouldn't, the hard drive files should be left alone. I can't find Final Cut Pro on the drive at all, it seemed to only appear when I'm using the original user name.
    Thoughts....discussions??
    I'm using the latest Macbook Pro 15 and updates.

    Firewire port is not required to install Final Cut Pro. Take a look at the Final Cut Studio system requirements and cross-reference it with your system specifications to discover what hardware your computer is lacking.

  • HT4722 Can Final Cut Pro be purchased and downloaded more than once?

    Can final cut pro be purchased and downloaded on more than one computer?

    This is an excerpt from the FCPX license, available here.
    http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
    2. Permitted License Uses and Restrictions.
    A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
    to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
    (ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
    Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

  • HT4664 Can I use final cut pro X on " Mac mini" ?

    Can I use final cut pro X on " Mac mini" ?

    depending on what model: for sure yes, it does!
    I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
    My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
    I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio

  • I can't open final cut pro

    I can't open final cut pro.
    I tried many times but always same message.
    During reading audio filter "GSP-1101" then stop and error message shows.
    GSP-1101 is digitech guitar multi effect for.  I erase that app but still same.
    It says
    Process:         Final Cut Pro [16201]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCutPro
    Version:         6.0.6 (6.0.6)
    Build Info:      FCPApp-905291121~12
    Code Type:       X86 (Native)
    Parent Process:  launchd [105]
    Date/Time:       2011-05-09 20:22:28.918 -0700
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          442109 sec
    Crashes Since Last Report:           10
    Per-App Interval Since Last Report:  120 sec
    Per-App Crashes Since Last Report:   8
    Anonymous UUID:                      CEED1A39-0766-40ED-AA1E-172DB715AD41
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x000000006b636970
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Application Specific Information:
    objc_msgSend() selector name: retain

    Final Cut Pro is part of Final Cut Studio.  Try here:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Can I add final cut pro to more than one Mac?

    I'm gonna buy final cut pro 5.1 and I wanted to know if I need to buy 2 or can I just get 1 and put it on both my Macs. I also wanted to know if this will work for Shake 4.1, Logic pro 7, Office 2004.
    24" IMac 3GB ram 750 GB hard drive   Mac OS X (10.4.7)   13" Macbook (white) 2GB ram 200 GB hard drive

    It will work on both simultaneously as long as you take one of the computers off your network while editing. Might be a violation of their licensing agreement though. Not sure about that. I have the same copy of FCP on my desktop and laptop but only use the laptop for remote editing when the desktop is not practical.
    G4   Mac OS X (10.4.6)   1.42 GHz, 2GB Ram

  • HT4589 how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    Thanks, I have found this on the "APPLE" support site; Final Cut Pro X: How to remove and reinstall Final Cut Pro X on; http://support.apple.com/kb/HT5149, which after reading through increased my trepidation ! Your directions are frightingly concise but Just what I needed..

  • Can't open Final Cut Pro after the migration

    I bought a new iMac (21.5 inch: 3.2 GHz) and migrated all the files from my old iMac, which I brought in 2006 or so. When I tried to open Final Cut Pro (Version 5.0.4), an error message shows up and says "Final Cut Pro quit unexpectedly" and I can't even open the application. Here are the details. Can anyone help me fix this problem? Thanks.
    Process: Final Cut Pro [3035]
    Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 5.0.4 (5.0.4)
    Build Info: FCPApp-512141418~2
    Code Type: PPC (Translated)
    Parent Process: launchd [109]
    Date/Time: 2011-01-02 22:48:29.318 -0500
    OS Version: Mac OS X 10.6.5 (10H574)
    Report Version: 6
    Interval Since Last Report: 694 sec
    Crashes Since Last Report: 3
    Per-App Crashes Since Last Report: 3
    Anonymous UUID: 5B0387B3-BBF0-4EFA-BBC5-8967DF2FA1DC
    Exception Type: EXC_CRASH (SIGTRAP)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x80239522 _pthreadkill + 10
    1 libSystem.B.dylib 0x80238dcf pthread_kill + 95
    2 com.apple.FinalCutPro 0xb80bfb30 0xb8000000 + 785200
    3 com.apple.FinalCutPro 0xb80c0037 0xb8000000 + 786487
    4 com.apple.FinalCutPro 0xb80dd8e8 0xb8000000 + 907496
    5 com.apple.FinalCutPro 0xb8145397 spinlockwrapper + 1791
    6 com.apple.FinalCutPro 0xb801ceb7 0xb8000000 + 118455
    Thread 1:
    0 libSystem.B.dylib 0x801430fa machmsgtrap + 10
    1 libSystem.B.dylib 0x80143867 mach_msg + 68
    2 com.apple.FinalCutPro 0xb819440f CallPPCFunctionAtAddressInt + 206231
    3 libSystem.B.dylib 0x8017085d pthreadstart + 345
    4 libSystem.B.dylib 0x801706e2 thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x802fc540 ecx: 0xb7fff9ac edx: 0x80239522
    edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
    ss: 0x0000001f efl: 0x00000286 eip: 0x80239522 cs: 0x00000007
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x80239518
    Binary Images:
    0x80000000 - 0x8005dff7 com.apple.framework.IOKit 2.0 (???) <A769737F-E0D6-FB06-29B4-915CF4F43420> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x8007d000 - 0x800e7fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
    0x80142000 - 0x802e9ff7 libSystem.B.dylib 125.2.1 (compatibility 1.0.0) <62291026-D016-705D-DC1E-FC2B09D47DE5> /usr/lib/libSystem.B.dylib
    0x8036a000 - 0x804e5fe7 com.apple.CoreFoundation 6.6.4 (550.42) <C78D5079-663E-9734-7AFA-6CE79A0539F1> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x805dd000 - 0x805ebfe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <3CE8AA79-F077-F1B0-A039-9103A4A02E92> /usr/lib/libz.1.dylib
    0x805f0000 - 0x805fcff7 libkxld.dylib ??? (???) <F0E915AD-6B32-0D5E-D24B-B188447FDD23> /usr/lib/system/libkxld.dylib
    0x80600000 - 0x80646ff7 libauto.dylib ??? (???) <29422A70-87CF-10E2-CE59-FEE1234CFAAE> /usr/lib/libauto.dylib
    0x80653000 - 0x807d5fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <35DB7644-0780-D2AB-F6A9-45F28D2D434A> /usr/lib/libicucore.A.dylib
    0x80837000 - 0x808e4fe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
    0x808f8000 - 0x808fbfe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
    0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <28F0312C-0678-159E-34E2-9A4E3DEADB20> /usr/lib/dyld
    0xb8000000 - 0xb81defff com.apple.FinalCutPro 5.0.4 (5.0.4) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <62291026-D016-705D-DC1E-FC2B09D47DE5> /usr/lib/libSystem.B.dylib
    Translated Code Information:
    objc[3035]: garbage collection is ON
    NO CRASH REPORT
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 4 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD1001FALS-40Y6A0, 931.51 GB
    Serial ATA Device: HL-DT-STDVDRW GA32N
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: OneTouch II, 0x0d49, 0x7100, 0xfd130000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd110000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa120000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000

    Two problems
    Never migrate a pro app.
    In your case the underlying issue is v5 is not compatible with intel processors
    The solution is to purchase the upgrade to the current version, erase your hard drive and install the system and pro apps fresh from the disks
    X

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • Can´t reinstall Final Cut pro on my Macbook without Firewire

    I can't install final cut pro in my new Macbook, should it be because of no firewire port.
    It says "hardware problem"

    Firewire port is not required to install Final Cut Pro. Take a look at the Final Cut Studio system requirements and cross-reference it with your system specifications to discover what hardware your computer is lacking.

  • Can't Open Final Cut Pro X

    I can't open Final Cut Pro X.  The problem seemed to start when I deleted some old backups.  Help?

    Close FCP X and re-open holding the Option key.
    This will allow you to create a new Library, do so.
    If the newly created Library works OK then there is a corruption issue in the current one that doesn't open.
    Try a backup, usually found in your Home>Movies folder.
    Al

  • Can I buy final cut pro using windows OS?

    can I buy final cut pro using windows OS, then install it in a mac in other state?

    Technically yes, as long as you use the same Apple ID on both machine's to purchase it and to download it. The Mac in the other state will have to meant the system requirements for FCP.

  • How Can I transfer Final Cut Pro X to another computer

    How can I transfer Final Cut Pro X to another computer without connecting the two

    As Kappy said, download it from the App Store - this will give you a brand new copy. However unlikely, it's just possible you might be copying a corrupt version from the original computer.
    In the App Store, make certain you use the same Apple ID that the App was purchased with.
    Andy

Maybe you are looking for

  • Referring to logo in Purchase Order Template

    I am making changes to the stylesheet inorder to add logo to the template. We put th eimage in the OA_MEDIA directory and i am reffering to it in the stylesheet as 'http://ora01.heliovolt.internal:8020/OA_MEDIA/heliovolt.jpg'. This is not working. Wh

  • How do I perform a factory reset on my S6000L

    Hi I bougth a Lenovo Idea Pad S6000L, I set up a password for it and restarted it. I tried to enter to password to log in but the sysytem says it is wrong How can I restore the machie to factory mode? Thank you, Upfront Solved! Go to Solution.

  • Steps to Create Addon

    Dear Experts, I am using SAP 8.8 & patch level 10. can anybody plz gives me steps of creating addon. Regards, Pravin

  • Sales report no incoterms

    Dear experts: do we have standard report to show thrid party sales revenue by period(month) based on incoterms? for example we need to know what are the revenues we sell to external customers based on FOB.

  • Show invoice rows on the Notification Details Page

    My problem is that I want to show all invoice rows on the Notification Detail Page but I don´t want to define an attribute for each row because I don´t know how many rows it is on the invoice(it could be 1 or 100 or more). I have made a solution fo