I'm running OSX 10.8.5 Mountain Lion. What version of QuarkXpress and Microsoft Word run with this level?
I'm running OSX 10.8.5 Mountain Lion. What version of QuarkXpress and Microsoft Word run with this level? My older versions are no longer supported.
Hi Jrehoboth,
please see here: http://forums.quark.com/viewtopic.php?f=14&t=4608
At the bottom of the post we summarized which version you can run on each version of OS X:
So if your operating system is OS X Mountain Lion (10.8) then you can use QuarkXPress 9 & QuarkXPress 10 and soon QuarkXPress 2015.
Thanks
Matthias
Similar Messages
-
Unable to open ".mht file" in Internet Explorer 10 and Microsoft Word running on Win7
.mht file error in internet explorer 10
"MIME-Version : 1.0 Content-Type:multipart/relates; boundar="---=N_NextPart_01CEFB@&>FA^*@A&)" This document is
a Single file Web Page, also known as a Web Archive File. If you are seeing this message, your browser or editor doesn't
support Web Archive files. Please download a browser that support Web Archive, such as Windows Internet Explorer Encoding:quoted-printable Content-Type: text/html;="windows-1252"
.mht file error in Microsoft Word
"You need to have Microsoft Outlook Express or Windows Mail installed to work Single File Web Pages. Outlook Express or Windows Mail is an optional component of Microsoft Internet explorer 4 or later."This area is for forum issues only. You'll have better luck posting your question here:
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprogeneral
Please do not read this sentence. Please ignore the previous sentence. -
I use MB pro running Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro and create a backup and then transfer ,Although I want Mountain Lion for my MB Pro but can I use the one from MB Air,thnx?
Hello,
If you just do a normal time machine backup on your macbook pro and then plug that harddrive into your new air; you should be able to just use migration assistant to transfer all your files. You wouldnt need to upgrade to mountain lion on your macbook pro.
Hope it helps,
Ryan -
I have Mac osx 10.8.2 Mountain Lion.
I cannot update safari to 6.0.2. "An error occurred while installing the updates.(103)" every time. I have Mac osx 10.8.2
Is Apple asleep?If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Post the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next. Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand. -
I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.
Harden your Mac against malware attacks
-
My computer does not start download osx mountain lion what should I do, My computer does not start download osx mountain lion what should I do
What's installed on your computer? If you don't have Snow Leopard 10.6.6 or later then you cannot get Lion. If you already have Lion installed then you cannot re-download from the App Store until you have reinstalled Snow Leopard.
-
I have an earlier model imac, the 2006 24inch and im running mac os x 10.5.8, i want to update my system to the newest mountain lion, what should i do first?
To clarify;
Snow Leopard 10.6;
Lion 10.7:
Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store. -
After Mountain Lion install, my MacBook Pro's fan is running non-stop.
After Mountain Lion install, my MacBook Pro's fan is running non-stop and you can hear the insides working extra hard. Is this normal? It's very loud and annoying?
http://support.apple.com/kb/HT3964?viewlocale=en_US
-
Run Snow Leopard Server on Mountain Lion?
Greetings!
I wondered if some kind person could post at least a link to a walk-through guide as I keep getting Guru Meditation errors when trying to install Snow Leopard Server 10.6.3 on Mountain Lion 10.8.5.
I am currently running virtual box 4.3.14 and Mountain Lion 10.8.5 as my host OS.
Thank you in advance…
CKThere is not a link as Apple does not support doing this. However, some have succeeded by installing Parallels (you have to purchase it) and then installing Snow Leopard Server to run under Parallels. If your MacBook Pro came with Mountain Lion preinstalled, you cannot run a lower version of Mac OS X by itself. It has to be the server version and running under Parallels.
Look at the bottom of this page under More Like This for some threads that deal with the approach you need to follow. -
I am now running on OS X Snow Leopard. If I upgrade to Mountain Lion, will all my files and data and bought programs disappear?
As Austin Kinsella1 says, it's a good idea to check your program versions.
I have found this site really helpful with that:
http://roaringapps.com/apps:table -
HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.
Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.
Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.
-
macbook pro seem not working, not either go to startup screen just freeze on apple icon.
and cannot also password for firmware are wrong when i type it in.
how can i know the keyboard problem if the password are confirm right?Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
I'm using Yosemite now, new computer comes with Mountain Lion, can I transfer apps and info?
You can, but there is a high risk of leaving OS X in your new Mac unusable. This is because Migration Assistant will detect that your new Mac has got preinstalled apps with an older version than the ones you have in the "old" Mac, and it will try to replace them. However, the new apps versions are designed for Yosemite, so you will not be able to open any application.
Because of that, I recommend you to set up the new Mac without transferring your data, and upgrade it to Yosemite. Then, use Migration Assistant to transfer your files. -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.
Maybe you are looking for
-
Return 504 Gateway TimeOut when access exchange service by domain/user and password
hi, here is the scenario: a user of our app is in ntdev domain, and his exchange server located at apj.cloudmail.microsoft.com. our backend api is deployed at the Azure servers at US West. our api get 504 Gateway Timeout when calling the FindFolders
-
IPod mini doesn't connect in Windows after doing an Update
Please help! I promised to put some music om my friend's iPod (1st generation) from my computer. When I connected it with my computer, i first did a new update. After that the problems began!! After completing the update the ipod showed a picure of a
-
How to get access to PageContext in a java class (.java file)?
Hi all, I am trying to get access to PageContext from inside a java class, and it doesn't seem to work. I could get the PageContext from a jsp page, at the object instantiation, through the constructor, but my class is not called by a jsp page. Any i
-
Real-time HDV importing ..& Happy New Year!
Hi! Happy 2006! Some time in December (?) I said I'd been to the London Apple Store to try importing HDV - with a Sony FX-1 camcorder - into iMovie HD on a PowerMac, to see if it'd import in "real time" ..instead of importing at half or quarter speed
-
What is the different between payment methods Wire and EFT
Hi All can anybody tell me What is the different between payment methods Wire and EFT ? Regards ;