I'm running Tiger...(yeah, I know).  What must I do to upgrade?

I'm running Tiger...(yeah, I know).  What must I do to upgrade?

My mini:
Model Name:          Mac mini
  Model Identifier:          Macmini1,1
  Processor Name:          Intel Core Duo
  Processor Speed:          1.83 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache (per processor):          2 MB
  Memory:          1 GB
  Bus Speed:          667 MHz
  Boot ROM Version:          MM11.0055.B08
  SMC Version:          1.3f4

Similar Messages

  • Tiger does not know what to do with some files

    I have lots of old files that do not have extensions so Tiger does not know what to do with them, Get info displays the files as Unix Executable Files. Is there anything I can do to figure out what the files really are?

    Open the Terminal in the /Applications/Utilities/ folder, type in the following:
    file
    followed by a space, and then drag the items into it. The Terminal will then make an attempt to determine what format each file's content is.
    (23203)

  • Outlook 2007 doesn't show icloud service running.  Does anyone know what the dll for this service is so it can be manually added to outlook?

    Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook.  Does anyone know what the dll for this service is so it can be manually added to outlook?   I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook). 
    So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?

    I had the same issue and figured it out.  First you have to start Outook as administrator.  To do this, shift and right-click on outlook and click run as administrator.  Next you need to enable Hard-disabled add-ins:
    Hard-Disabled Add-Ins
    Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
    To re-enable an add-in
    In the application, click the File tab. 
    Click the ApplicationName Options button.
    In the categories pane, click Add-ins.
    In the details pane, verify that the add-in appears in the Disabled Application Add-ins list.  The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
    In the Manage box, click Disabled Items, and then click Go.
    Select the add-in and click Enable.
    Click Close.
    Then you need to activate it. 
    To re-enable an add-in
    In the application, click the File tab.
    Click the ApplicationName Options button.
    In the categories pane, click Add-ins.
    In the details pane, verify that the add-in appears in the Inactive Application Add-ins list.  The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
    In the Manage box, click COM Add-ins, and then click Go.
    In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
    Click OK.

  • I cant get online with my lap top using airport secure router my lap top is running windows vista anyone know what i need to do?

    I connected airport express and made it a secure network   works fine  with my IMAC desk top and copy machine    but cant seem to get on line with my DELL laptop running windows vista  does anyone know what i can do ?  I put in my passpharse code but it says windows cant connect

    So, when you are in the window that provides the Equivalent Network Password, you are saying that your WPA Password and the WPA Pre-Shared Key values are the same? That is, you are already using a 64-hex character password? (see image below)

  • How do i know what version of the Firmware Upgrade 1.01

    Op
    ps.
    What i was trying to say is how do i know what version of the firmware does my player have installed on it,
    I have a 28mb MuVo V200 and i was thinking of downloading the Firmware Upgrade .0.03 but i do not know if my player already has iMessage Edited by The_D_AUS on 05-0-2005 07:45 PM

    Just access the player Menu and then scroll to the option 'Setting'->'Information'.
    Jason

  • Still run Tiger on my Dual 2.7 PowerPC.  Benefits upgrading to Leopard?

    Hello, I decided to put this post here, instead of in a more general hardware discussion, due to Logic Pro being my main app concern.
    I am using a Dual Processor 2.7 PowerPC G5 Power Mac, with the latest version of Tiger. I have heard several mumblings about it not being entirely worth upgrading some powerpc machines to Leopard, due to Leopard not being tailored to run as beautifully, as Tiger was, on powerpc's. Is there truth to this? Is the chance of hardware failure increased? What type of performance might I expect upgrading to Leopard, with overall system usage, as well as with Logic Pro 8, when compared to Tiger? I would hate to have some of the responsiveness I currently have to be lost!
    I I currently have 6.5 gigs of Ram installed.
    Thanks so much for your responses! I would love to hear stories from people who have my same Power Mac model, as well as any other input!
    =D

    My 2¢:
    I am using a Dual Processor 2.7 PowerPC G5 Power Mac
    Slightly faster G5 than my old workhorse, which runs very nicely in 10.4.11
    What type of performance might I expect upgrading to Leopard
    If you looking for a boost, then IMO, none, or at best, very little.
    Is the chance of hardware failure increased?
    Very unlikely. There's no reason that an OS upgrade would affect hardware, other than any incompatibility issues which might arise.
    I would hate to have some of the responsiveness I currently have to be lost!
    You may.
    I also have a MacPro with 10.5 and although it's a much faster machine, for me Logic is less stable. To be fair, this might be because of my external hardware.
    The main question I have is why?
    What advantages do you think Leopard may have for you? Time machine? Spaces?
    If your system already runs well, is stable, and does everything you need, why jeopardize it?
    If it ain't broke…

  • Does anybody know what the cost is to upgrade 5 weeks early for iphone 6

    contract is up toward the end of October. Ordered iphone 6 for my daughters line which is eligible but now I dont want to wait for one for myself. Since delivery dates are now well into October would they let me order now. 

    Probably not.  If you are not eligible till October, you can't pre-order it now anyway.Order it once you re eligible.

  • HT4972 what must I do to upgrade my 4.3.3 ipad 2 to the latest version? I have tried several times on my windows pc but it will not let it finish.

    It will update for about 10 minutes and when it starts proccessing file it gives me a message that it is unable to complete to check my connection or try later.

    If you are getting a network timeout error then try temporarily turning off all your firewall and antivirus software until the download has completed.

  • Know what is in a upgrade (changelog)

    Hello,
    I would like to know what is exactly in an upgrade done by archlinux developpers. For example, if shotwell 11.1 is upgraded to shotwell 11.2 I can see what is new on shotwell website because it is a upgrade done by shotwell developers. However, if shotwell 0.11.2-1 is upgraded to 0.11.2-2 ; it is a upgrade done by archlinux developers and I don't know how know why this upgrade.
    I was looking in the man of pacman and the option which seems to fit to what I want to do is -Qc :
    QUERY OPTIONS
    -c, --changelog
    View the ChangeLog of a package if it exists.
    But "pacman -Qc shotwell" does not work and I don't find any package which have a changelog yet.
    So how can I know what is behind a minor upgrade of a software (X.XX.X-1 to X.XX.X-2 for example) ?

    ppr wrote:
    Thanks for your answer.
    But What means exactly "to go upstream". Is it means go the trackbug ? If it is the case, I am not able to find any shotwell bugs in https://bugs.archlinux.org.
    No, upstream means e.g. shotwell dev team - maybe they provide a changelog, news or something like it.
    You can read Arch mailing list or see the svn/git repo http://projects.archlinux.org/svntogit/ … c50fbb710e but the latter will show you only what changed in the PKGBUILD (in this example patch was added), not what changed in the code the package is built from.
    Last edited by karol (2011-10-13 16:16:56)

  • My mac os x is currently 10.5.8. What is the cost to upgrade to the most current?

    My macbook pro os x is currently running 10.5.8. What is the cost to upgrade to the most current?

    Assuming you have the upgrade system requirements you would first purchase a Snow Leopard DVD and upgrade to Snow Leopard. Then you update Snow Leopard to 10.6.8 to gain access to the App Store where you would then purchase and download Lion. Costs are $29.00 for Snow Leopard and $30.00 for Lion.
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    See the following as well:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).
    Once you then purchase and download Lion from the App Store consider this before you actually install Lion:
    Make Your Own Lion Installer
    1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the InstallESD.dmg disc image file into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable Lion installer that  you can use without having to re-download Lion.

  • What is the price to upgrade from FCP7 to FCPX?

    Does anybody know what is the price to upgrade from FCP7 to FCPX?

    Note that FCX isn't an upgrade...it's a completely different application. Thus why you pay the full amount, although the price is less than FCP Studio.
    Because this is a new app, you cannot bring FCP 7 projects into FCX...not without a third party utility called 7toX by intelligentassistance.com 

  • I have just got an old ibook 4g and i want to know what os system i can run on it please

    i have just got an old refurbed ibook 4g and was wondering if anyone out there would know what os system i can run on it pleased

    Hello,
    Depends on which version of the iBook G4 you own. If it greater than the 800Mhz model then you could install Mac OS X 10.5 (leopard) Otherwise it would be Mac OS X 10.4 (Tiger)
    There are alterative PPC versions of Linux like Ubuntu that could also be installed as an OS
    Best of Luck

  • Mac book pro is very very slow/it hangs for even the smallest tasks/even with the lid closed it is still running if it is not completely turned off. Dose any one know what may be wrong ? and how to fix it?

    More details about the problem : My computer is a Mid 2012 Mac Book pro 2.9GHz i7 processor with 8GB RAM updated to OS X v10.8.5
    - I ran a compleet scan of my computer for any threats ( I used virus barrier express ) and there was nothing identified
    - When I oppened the Activiti Monitor there are about 20-30 processes which I do not undersatand they are run under the user "root" 2 in perticular ( Kernel_task & fseventsd ) they both take up a lot of threads and kernel_task is constantly using 1.2 GB of "real memory" which is at least 20 times any other process that is running espesially the ones that run under the user "Apple" I do not know if this is causing the problems on my mac but i tryed to forces close it and it dose not even let me click the button, the others close but reopean immideatly. I will attach a screen shot of what i have mentioned here.
    - The problems I am facing are mainly performance :- To state a few examples, my mac dose not seam to be able to handile even the smallest tasks like switching tabs on safari, typing any thing, playing a movie withought stopping inbetween, etc.. ( let me elaborate on why I said its not able to handil these tasks, it is because when I am trying to do any one of the afformentioned tasks inbetween the cursor becomes a rainbow collered spinning disk and I am unable to do anything for about 10 seckonds after which it starts to work again for some time before it happens again. )
    - Another concern of mine is that my mac seems to be on even with the lid closed if I do not shut it down compleetly, if i just close the lid after some time the computer starts warming up, and the fan starts running. the battery is drained at the same rate or slightly less rate than it would have if i was using it normally with the lid opean. ( altough this is happning the screen dose not turn on untill the lid is opean again )
    - I have only 300+ GB full out of my 750GB so i believe these are not issues caused by my mac's memory being full ( BUT THE FIRST TIME I NOTICED THIS WAS HAPPNING WAS WHEN MY MEMORY WAS ABOUT 720GB FULL WHEN THESE ISSUES FIRST AROSE I IMMEADITLY DELEATED 400+GB OF MY USELESS FILES THAT I HAD BEEN HORDING ALL OF WHICH WERE MOVIES ) that about covers it all PLEASE LET ME KNOW IF ANY ONE KNOWS WHAT TO DO.
    Ps: I apoligize if I have given too many unrelevant details, not enough usefull information and or if i was just all over the place with my explanations but I am really frustrated and was hoping not to miss anyting. Please let me know if any information at all is required and ill do my best to provide it.
    Thank You

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • SpeedBit has ruined all my programs. Can't Open/Run programs including using my FAVORITE BROWSER---MOZILLA FIREFOX. HELP!!! PLEASE I DON'T KNOW WHAT TO DO

    I do not know what all started everything. I have been using Mozilla Firefox as my #1, favorite and of course my preferred browser over Internet Explorer, Google Chrome, Opera...It is just awesome. Also, I had been using DAP 10 Premium downloader, SpeedBit downloader and converter. Everything to go well for over 1 year. Then all of a sudden, sometime about 2 months ago, I opened my browser, tried to run it so that I may go online. Lo and behold I received a message saying: C:\Program Files\Common Files\SpeedBit\SBUpdate\sbfi32.dll is missing. Try re-installing the program again to correct the problem. Well I did--- probably at least 20 times, but no help, It did not work. Now, I can't even open most of my programs/software because the same message keeps popping up. I personally think that something should be done to those who wrote the program--if they intended something malicious [in] the software--I REALLY NEED HELP!!!

    Hello,
    Please download and run the following file http://download.speedbit.com/sbw.exe and please let us know if the problem with your browser is solved. (If not, kindly click on the Windows "Start" and type services.msc in the Search field, find "Speedbit Update service" in the opened window and disable it.)
    Kind regards,
    Speedbit Team

  • I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    Load the drivers and you should then be able to add it in Print Center.

Maybe you are looking for