I'm running Ver. 17.0.1 on windows 7 and this morning all my extensions and plugins have just dissapeared. Help
Opened Firefox this morning and all addon extensions & plugins including my Roboform password manager are gone. In tools, Addons, extensions and plugins everything is blank. How can this happen? I'm running Windows 7 64bit Enterprise and this version of Firefox automaticly upgraded when it came out and everything was accepted by this version when it installed. It has been running for sometime now.
Thank you,
jimmyboy01
ok, glad that you could fix it in the meantime anyway :-)
Similar Messages
-
My Macbook Pro (early 2011) has 4 gig of memory and is using all of it and running slow.
My (early 2011) MacBook Pro has 4 gig of memory and is using all of it and running slow. I am planning to double memory, but any ideas about why it's using all that memory? (Yosemite 10.10.2).
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Can anyone help, I work on a 64 bit HP laptop
I've successfully used Adobe Technical Support Chat several times to solve problems like this.
Go to http://helpx.adobe.com/contact.html and follow the prompts, until you get the CHAT option. You will be talking online with a very smart and polite person from India, who has everything needed to solve your issue. I recommend you relax and go with the flow of this chat: it may take over an hour to solve your issue, but believe me, they DO actually have what it takes.
Good luck. -
When I navigate to the Applications/Utiilities folder, and attempt to open the AppleScript editor I get an error popup with:
The document "AppleScript Editor.app" could not be opened.
Has AppleScript gone away, or is my OS Installation broken?
Thanks,
CraigP
Ok, so it's broken. Any idea how to un-break it? For example, is there Installation Media for Mavericks that I can burn and attempt a re-install with?Your installation is broken.
-
I have a 27 in. iMac OS X, Version 10.7.5, Intel Core i5 and have a problem with the very loud and annoying fan running continuously. The fan starts up immediately upon powering up and stays on all the time. I have researched this on the internet and have tried resetting the SMC unsuccessfully. Should I try fan control software?
To reset the SMC means to reset the power management settings for your Mac. To do this, follow these simple steps.
1) Shutdown your Mac by going to the Apple Logo in the upper left hand corner of the screen and selecting "Shut Down" from the drop down menu.
2) Turn your machine back on while continuing to hold down the power button.
3) After the initial boot chime, your power indicator light should flash three times.
4) Your screen will remain black and you will hear the boot chime again. At this point, you may release the power button and allow your Mac to boot up normally.
All the best with getting your Mac Mini to run smoothly. -
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
Has anyone else seen the "Excel cannot complete this task with available resources" error message appear when Excel isn't even open? It keeps happening to me, and it's the strangest thing.
It seems like interacting with Excel files sometimes prompts it - for example, I just turned on my computer this morning, checked my email, and then opened Google Chrome to upload some Excel files. Excel hasn't been opened at any point since the machine
booted up, but this Excel error popped up while I was uploading the files.
Checked the Task Manager because I was baffled (not that this is the first time it's happened), and there's no Excel application running, just that silly error message. Choose OK on that error and a VBA run-time error message appears (not even sure if it's
Excel VBA or Word/Outlook but I assume it's Excel - it's the good old 1004, application-defined or object-defined error).
Debug is greyed out, so it won't let me debug to see what the problem is. Choosing End brings the "Excel cannot complete this task with available resources" message back for one final performance.
This happens on a not-infrequent basis: Excel isn't open, and I randomly get this set of Excel errors: 1) "cannot complete task", 2) VBA run-time, 3) "cannot complete task" again. Then it's done, until the next time it happens. Weird.
I have 32-bit Windows 7 and Excel 2013/2010/2007/2003/2002 (I know!) but the issue only started after installing 2013. I also get the "cannot complete this task" message regularly when working in Excel (generally with Power Pivot or something legitimately
memory-hungry though), and restarting the application does the trick. I don't mind a heads-up when I'm gobbling up too many resources, but when Excel's not even open, it's a bit ridiculous. It's like I have a zombie Excel! Does interacting with Excel files
via upload/moving around Windows Explorer actually trigger some sort of Excel action in the background?
Any ideas would be most appreciated!! Thank you :)Hi,
As the memory error messages , it can be very generic and don't always identify the real cause of the issue. We may try to use the KB that Mr. KR mentioned above to troubleshoot it.
On the other hand, if the file is xls format, we may convert to the new file format .XLSM and test.
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28339883.html
Next, try to disable hardware graphics acceleration from File > Options > Advanced > Display section and disable Aero Themes (if you enabled) to check the results.
For the hangs and crashes issues, we may use ADPlus.vbs to troubleshoot:
http://support.microsoft.com/kb/286350/en-us
http://www.networksteve.com/exchange/topic.php/Excel_cannot_complete_this_task_with_available_resources_error,/?TopicId=39411&Posts=1
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it's helpful.
George Zhao
TechNet Community Support -
No,I recently buy an android device which is running ver 4.0 and has flash player.So please make Adobe Flash Player for IOS devices pls!pls .
You need to contact the folks at the link below.
http://www.adobe.com/aboutadobe/contact.html -
I have a Mac Book Pro and run Ver 10.5.8. I bought iLife today and it won't run on less than 10.6.3. How do I upgrade?
If you do, it will be shipped to you on DVD unless someone from Apple tells you otherwise.
(58671) -
Trying to download the compatibility reporter and it says I'm running Ver. 3.0.16 and that I need Ver. 9.0a1. What???? I just upgraded to Ver. 6.0 also when I tried to submit feedback It said I needed to upgrade to Ver. 6.0 but I already did!!! I think it might be time to try Google Chrome! All the people I recommended firefox to are no longer using it because their add-ons no longer work. Running Windows XP
Make sure iTunes is up to date and try again.
-
What to do?? - I just updated my iTunes to ver 11.2.1 because of the annoying messages they keep sending out.
Now I can't play the movies and TV series I've purchased and were watchable before.
Comes up with "This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection)."
The cheek of the matter is everytime I tried to get Apple support it comes up with a request for me to pay $54 for their support package, to fix a problem I didn't have until I complied to one of their update requests.
End of Rant!!! - Anyone know how to fix please?Well, I wonder about all the responses...:)
Anyhow, I wound up "fixing" the problem by using the System Restore disks for the Mini. It's now running Tiger 10.4.11 (with all updates) and I copied my iTunes library over. It all works now. <shrug> I have no idea what the problem was, and I'm a bit leery of upgrading it to Leopard, so I think I'll just leave well enough alone.
Richard -
Updated to 4.01 and it would not start, removed and loaded 3.6 with no problems ??? running XP SP2
Have been using ver.3.6 for months and have not had any problems, tried to update to 4.01 and it would not "start", even after re-starting the pc. Removed and reloaded ver.3.6 and no further problems.
System is a XP SP2 ???
Are there any issues with ver 4.01 on XPNo, there are no issues running FF4x on Windows XP. I have that OS installed myself.
You appear to have McAfee Site Advisor installed. Versions prior to 3.3.1 are incompatible with Firefox. See https://www.mozilla.com/en-US/blocklist/
See also: http://kb.mozillazine.org/Problematic_extensions
Disable McAfee Site Advisor in Tools | Add-ons | Extensions and then update Firefox again via '''Help '''| '''Check For Updates'''. -
I have just returned from a business trip to China and my Macbook is not well. My internet connection is very slow and drops out intermittently. Is there a utility I can run which might clean it up.
Hello,
I have very similar problem. Suddenly Firefox stopped work - It was working few days after ver. 4 update. I was looking everywhere for some solution but nothing worked.
- uninstalled firewall - did not worked
- added full exception for Firefox into the firewall - did not worked
- Firefox reinstall - did not worked
- Firefox complete reinstall (registry included) - did not worked
- IPv6 diseabling - did not worked
- diferent proxy options (no proxy, system proxy, autodetect proxy) - did not worked
- new firefox profile - did not worked
- complete coockies, history... deleted - did not worked
- there is only one solution which partly works - I have used public proxy addresses for Firefox but the ping is (750ms), down/up (0.8MB/0.2MB originaly (10MB/2MB) and yes I have tried different proxy server from different countries from my included.
- IE is working perfectly and without proxy
- other companies browser - did not worked too
- only IE is working
- I have used three different malware, trojans, spyware, anti-virus programs and nothing
It seems to me as hopeless situation or very clever move from Microsoft, I am forced to use IE - at least this works
Any ideas, solutions?
System Windows 7, firewall Comodo Internet security
Thanks everyone for the help -
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?
i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks
Maybe you are looking for
-
My Apple ID password for icloud / I have reset it and still my Account is Disabled ? MY icloud account for iTunes App Store ,keeps saying my account is invalid / disabled to contact " Customer Service" in the iTunes store? How do I fix this ? I've re
-
do anybody know how to use 2 iphones on the same itunes without creating a conflict? if not, how can i import my itunes music on itunes if i open another user session?
-
Can I create a salutation field to print labels like, "Rob & Julie Smith" ?
I want to send Christmas cards to my friends in Address Book. But when I print the address labels up, I want something to appear other than the standard "firstname lastname" on the top line of the label. Can I create a custom field, like a salutation
-
Bridge CS3 on opening: "This Application may perform badly"
I recently restored my PC to factory condition to troubleshoot performance problems in CS3 Production Premium. I reinstalled all my programs, but it got a little messy when I restored my backup files from an external hard drive. Lots of files ended u
-
My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?