I'm running Windows 7 and occasionally, Firefox will become completely unresponsive and grey out, then none of my programs will open at all, including the Start menu, forcing me to use a hard restart and shut down. Any help would be appreciated.
I'm not able to close and restart Firefox at all, since the computer becomes completely unresponsive, save for mouse input. Task Manager is also of no use.
Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Similar Messages
-
i have a new pc with windows 8, i've downloaded itunes but there is no evidence of it that i can find but when i go to redownload it comes up with 'thanks for downloading itunes'... any help would be appreciated
See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2 -
hello, I'm trying to burn a playlist from itunes to a cd, but I keep getting a message saying "the attempt to burn a CD failed because of a medium write error" can anyone tell me what I'm doing wrong. I'm not so tech savvy so any help would be greatly appreciated. thanks
I'm not familiar with this error, but check the following:
-Is your disc a CD or a DVD? You want a CD, not a DVD.
-Is the CD blank? You'll want a blank one.
-Maybe the disc is scratched and cannot be used. Try another CD.
-Maybe your disc burner is broken. If you have another, try it. -
The DM-4800 and Logic see each other, the firewire shows as 'locked' on both. Can pass audio back and fourth, no automation from the Tascam though. I know its either a midi setting or control surface settings... but I'm stumped. Newbie at Logic here. Any ideas what to check? Thanks in advance!
Plug in the usb lead.
-
I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....
Try using this article to help with your iPad not showing up in iTunes---
http://support.apple.com/kb/TS1538 -This deals with the device not being recognized in iTunes for Windows
The following steps work well with iPod but i would try them for help with your iPad issue:
Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain. -
Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.
Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao. -
Once firefox 4.o was installed, when switching to full screen while watching any internet video produced a white screen but audio still playing. Switching back to small screen has a still video but audio still going. Had to exit and and restart video or open a blank new new tab then delete it and then small screen video would play. Using a mac os 10.5. Disabling hardware acceleration did not fix. went back to firefox 3.6 and all is ok. Any help would be appreciated.
Your hardware was never designed to run that old a version of OS X, it's best to update the application or find another application that is more up to date. Installing Leopard simply will not work on your system.
-
Problems installing OS
I have an iMac 21.5 (mid-2010) and I'm trying to install a new hard drive. When I choose the installation disk the Apple logo comes up and it stops there. Then the mouse and keyboard goes dead. I'm trying to install 10.6. Any help would be appreciated. ThanksSince you have a new hard drive, there is nothing on it, so you need to boot from an external source (and probably format the hard drive before installing an OS). Are you booting from the 10.6 install disk? Better yet - do you have a bootable backup clone or at least a Time Machine backup?
-
Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!
This what my IT replied with:
That teh MacBook cannot connect with RWW because it requires Active-X to connect. That MAc browsers (Safari) do not use Active-X but only Windows (IE) uses Active-X control.
It would seem to me that there must be a way around this. Any help?
Thanks, -
I am a windows XP user and I downloaded I tunes 10 and my computer slowed down to a snail pace.. Any other problems out there?? Any help would be appreciated..
I am a windows XP user and I downloaded I tunes 10 and my computer slowed down to a snail pace.. Any other problems out there?? Any help would be appreciated..
-
Using my USB, my ipod touch 2 is not recognized in Windows Vista or i tunes. If I connect it to my wifes Xp, ( where it was before) , it still charges up ( i tunes has been uninstalled. Any help would be appreciated. I have reinstalled itunes.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
ThanksThe netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you. -
Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy
That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally. -
My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old computer.
if you need to deactivate, contact adobe support
https://helpx.adobe.com/contact.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.
Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Maybe you are looking for
-
HP 8500 All-in-one printer - how can I print in black and white only (to save color ink)?
I want to be able to select the option of printing in black and white only to save color ink. How can I do that?
-
Everything on my computer works fine and I have successfully connected to the internet (wi-fi is on) but for some reason Safari will not open. I tried to google the problem and it told me to try it under a different user. I tried that and it still do
-
Fix for VM not received and visual voicemail not showing
Wanted to share this with all. Easy fix at bottom of this post Iphone 4 user. My voice mail was not getting through - no tri-tone alert and no sign of the message on visual voice mail screen. Happened over the last 10 days after working properly prio
-
HT4061 forgot my passcode and cant get into my phone
I have forgotten my passcode and cannot get into my phone
-
I'm trying to buy CC Photoshop/Lightroom packages. In order to complete payment, I need to change the country from the default options (United States) to Brazil, But I'm not allowed to do it. I've already changed my origin country in my account infor