I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up/go to my desktop?

Have a look here http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
Stefan

Similar Messages

Can i run Windows XP on Boot Camp

Hello I am a new Mac user that needs to run some Windows based programs.
Can i run Windows XP on Boot Camp?

mende1 wrote:
The only option to install Windows XP on your Mac is to install it on a virtual machine, using an application like Parallels, VMware Fusion or VirtualBox
Well, if his iMac will boot from Snow Leopard, he would have the rather troublesome option to downgrade it to Snow Leopard, install Windows XP in Bootcamp and then bring it back to Mountain Lion (which could then also be used with Parallels for either dual-boot or concurrent use with Mac OS X).
Just another option to consider.

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.

As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Windows7               *2.9 GB     disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

I erased my windows partition using disk utility then realized I should have used boot camp, because now I can't resize the original partition and seem to be stuck with a ghost unusable space. Boot Camp now doesn't give me the option to install or re

I erased my windows partition using disk utility then realized I should have used boot camp, because now I can't resize the original partition and seem to be stuck with a ghost unusable space. Boot Camp now doesn't give me the option to install or remove windows partition.

Hi, Ralph,
The problem is that I did erase the partition, using disk utility, but I can't go back to my original disk size pre-partition, as disk utility won't let me do it and gives the message "Couldn’t modify partition map because file system verification failed." When I try to use Boot Camp Assistant it won't let me select the third option to remove windows.

Stuck during Installing windows 7 using boot camp

Hi,
Anybody please help. I tried to install Windows 7 using boot camp, but always stuck halfway...please see the attached image for my failed attempt step by step. Please correct me, if i miss anything
1)
2) Then when click continue, this error came out,
I did watch in youtube how to install windows using bootcamp, there is no this type of notification supposed to come out.
3) Then , I continued, created the window installer using bootable pen drive and download the windows support.
4) But the, It just END here without proceeding to install window.
WHY IT JUST STOP HERE???PLEASE, SOMEONE TRY TO EXPLAIN AND GUIDE ME...AND WONDER IF U SEE THE NEXT IMAGE, I NEVER CAN JUMP STRIGHT TO THIRD STEP (INSTALLED OR REMOVE WINDOW), SINCE I DO HAVE THE BOOTABLE WINDOWS INSTALLER AND UPADATED SUPPORT SOFTWARE. I cant select the third option, it just greyed...
I would be great if somebody can help me out...I did try to install the windows almost 10 times already, never success...
I am using Macbook Pro Retina 13in (late 2013), Maverick 10.9.2, 2.8 Ghz Intel core i7, 8GB 1600 Mhz DDR3

Turbostar,
Yes, i do have more than one partion on my mac hard disk, so u meant, boot camp cant work with multiple partions?
If i need to format hdisk, this will be the second time, with my 3month old macbook..

Problems installing Windows 7 using boot camp assistant

I have followed the guide form the Apple website and using boot camp assistant, I have managed to install Windows 7 Home Premium up to a point.
When the IMac re-boots and starts up in Windows 7 it tries to complete the installation but neither my mouse, keyboard or trackpad work.
This means I cannot enter a computer name in the first windows 7 screen, which in turn prevents the completion of the installation and the installation of the drivers for the keyboard, mouse and trackpad.
Does anyone have an idea how I can complete the installation?
I am using a 2012 IMac 27".
Thanks

Hi,
yes I used boot camp for everything and followed what was advised on the Apple web page. The USB remains in the back of the machine and it did download the windows drivers etc, but it doesn't seem to have installed them yet.
If I'm reading help manual properly, it is supposed to install them after windows 7 has been installed. But I can't get past the first Windows screen asking me to name my windows computer.
If I obtain a USB keyboard will that run without any drivers being required?
Thanks

Top 15 or 20 mistakes I made installing Windows XP using Boot Camp/Leopard

There are pitfalls installing XP in Boot Camp. I'm pretty sure they are mostly covered somewhere on the Apple Bootcamp Support page. Here's what this Windows virgin found in the past few days installing XP on my MacBook Pro running Leopard. By all means, feel free to correct or add to my comedy of errors.
1) First run Software Update on your Mac to make sure you are working with the newest Mac software and firmware. If you are obsessive, run Disk Utility afterwards and restart. (I did this)
2) Follow the instruction in Apple's Boot Camp Installation Guide pdf to the letter. Don't skip anything. Don't assume anything. Print it if you can't run it on another machine during the Windows install. (I looked at it, not well enough.) Read #3-7 before you start the install.
3) Run Boot Camp Setup Assistant to "preformat" a Windows partition. 5 gigs is too small a partition and means more work later since XP eventually used up 5.6 gigs of my 32 gig partition (26.4 gigs free after a fully updated install of Win XP Service Pack 3 + anti-virus software + Adobe Reader + one app). (I avoided the too-small partition by dumb beginner's luck but see #4)
4) If you mess up your Windows partition and decide to start over, restart in Leopard and use Mac's Boot Camp Assistant to remove any inoperative Windows partition. If you are obsessive, run Disk Utility afterwards and restart. Then use Boot Camp Assistant again, as in #3 (I got to use this feature, too.)
5) Use the right Windows software. Win XP Service Pack 2 does install and can be updated after you have a solid XP installed with driver. Before you update, read #8-10. (I managed to buy the right XP software)
6) During installation, with the Windows Installer, you must reformat the Windows partition created by the Boot Camp Assistant. Don't get fancy and repartition: just format. Read pp. 13-14 of the Apple Boot Camp Installation Guide pdf. The Windows NTFS format using long, slow, careful reformat takes a looonnng time, long enough to make me think the installer was hung, except the cursor was blinking. (I did this but only after I tried to install the dumb way, without the Win installer reformat. If you don't reformat, you'll see a black screen, "Disk Error" with a flashing cursor at the top. Time to refer to #4.)
7) When Windows reboots after a successful install of XP SP 2, immediately eject the Windows install disk using Windows and immediately insert the Leopard Disk to install Windows drivers. (I did this. Some report problems with this step, but it worked for me.)
8) When you restart in Windows, run Windows Update to install everything except Service Pack 3. Mouse around the update feature a bit. If you don't update to SP 3, there is an optional install of a new IE 7 and an XP update that fixes some installer issues. (I did the optional install before I figured out #9 and tried to install SP 3 a couple of times. See #10 for what happens if you try to install SP 3 before #9.)
9) Using IE 7 in XP, go to the Apple Boot Camp page to download and install Boot Camp 2.1 Update For Windows XP. This installs on the Windows side, not in OS X. ( I did this, throwing caution to the wind and choosing "Run" when the download options of "Run" or "Save" appeared.) When BCUpdateXP.exe opens, the installer asks you to choose repair/update or uninstall. Choose repair/update. I think the machine needs a restart.
10) Now install XP Service Pack 3 using Windows Update. If you try to install XP SP 3 before the Boot Camp 2.1 Update for Windows XP, you will receive the following error message:
"There is not enough disk space on C:\WINDOWS\$NtServicePackUninstall& to install Service Pack 3. Setup requires a minimum of 4 additional mebabytes of free space or if you want to archive the files for uninstallation. Setup requires 4 additional megabytes of free space. Free additional space on your hard disk and then try again. Error Code 0x8007F003." It's a lie, assuming you set up a large enough Boot Camp partition at the outset. Both Windows and Disk Utility will tell you the size and available space of the Boot Camp partition.
Like I said, everyone is welcome to add the next 5 or 10 ways to mess up. Without Search, this forum is rough.

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

Running Windows, Parallels? Boot Camp?

I've used boot camp very successfully with my mac desktop, but I'm hoping to receive a macbook (the black one) for christmas, and I'm hoping for a better option when using windows. I tried parallels with one of my older, clunkier macs (the one that's full of my movies, music, etc.) and it ran very slow, and it was nearly impossible to run other programs alongside it. Has anyone else had this problem, or is it fairly easy for you to run Parallels with other programs? I really love the malleability of parallels compared to boot camp. The idea of partitioning a large portion of my hard drive in a fairly permanent way is not very appealing to me. Any suggestions?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.

Unable to Install Windows 7 using Boot Camp Assistant

I recently suffered a hard disk failure. After replacing the disk, I have recovered all data with the exception of being unable to install windows 7 on a new boot camp partition. I am able to create the partition using boot camp assistant, but I am subsequently been unable to install windows following the directions provided. Any help would be appreciated. I have a late 2009 27" iMac running OSX Mavericks.

It depends of the OS X version you're using. If it's 10.6, insert the Mac OS X DVD and install them.
If it's 10.7 or 10.8:
1. Press X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant, download drivers and burn them into a DVD or USB drive.
3. Start into Windows and install Boot Camp drivers

How do you get past the create partition step? Trying to indtall Windows 7 using Boot Camp 5

Trying to install Windows 7 on a MacBook Pro with Mavericks. Currently run Win7 using VMware but experiencing poor performance and lockup. Have tried to use Boot Camp but cannot get past the 'creating partition' step. The blue bar shows some progress (about 10%), but then after some time it produces a generic error message thst it cannot create the partition.

Hold the option while turning on the computer. You should see your statup drives. Just choose the OS X drive and eject your disc once in OS X.

ITunes opens but without any text showing. Drop down menus have text but not the app itself. I have a Mac Powerbook Pro running Windows XP under Boot Camp.

Running under Windows XP, a few upgrades ago iTunes started opening without any text showing in the application. Clicking on PLAY will play music but no text shows to indicate what's playing and no text to show music library. Drop down windows show text but not the app itself.
Subsequent upgrades and reinstalls have not corrected the problem, When I run under iOS (Snow Leopard), iTunes opens with text and runs correctly.
Help!

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

Similar Messages

Maybe you are looking for