I'm running XP SP3, FireFox 26.0 - sometimes when I minimize FF, the tab in my task bar disappears.

This started happening several update ago - maybe 6 or 7.

When that happens (I've seen this happen in the past) then you should still be able to use Alt+Tab to switch to this window.

Similar Messages

My firefox won't create a new tab when I click on the tab. It will create a new window. It worked fine till this morning. I've rebooted several time to see if that would make a difference. It doesn't.

I can only create tabs by clicking on a link in an email or a program or a link in the window I am viewing. It will NOT create a new tab when I click on the tab to create a new tab, nor will it create a new tab when I right click on the tab & click on create a new tab. I'm used to using tabbed browsing all the time & it's driving me nuts. HELP!
I have not downloaded any new updates on any software or downloaded any new software in the hours before this started happening.
Just to clarify about my original question. I meant to say that firefox will create a new window when I right click & click on create a new window but will not create a new tab when I click on create a new tab. I think what I wrote may have been somewhat confusing.

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Sometimes when I minimize my Firefox window (I always have lots of tabe open), I can't maximize again, even after rebooting.

I usually run Firefox with many windows open. Sometimes when I minimize the Firefox screen, I can't maximize it again. Rebooting doesn't help.

It didn't work the first few times I tried it, but the 3rd time it did. Thanks.

Sometimes when I open a new tab, I get a blank burgundy screen that covers up the window and sometimes I can get rid of it and sometimes not. At this point, I'm ready to totally get rid of Firefox. what is going on?

When I click on the plus sign by tabs, a burgundy blank screen appears over my window, blocking the tab groups except for the top portion. I can still see the URL address field and the tabs above but when I click on a tab, it comes up beneath the blank burgundy new screen on my window. I then have to open a new window but I have to start over on the tabs. I can't use the ones behind the burgundy screen. sometime when I click on the home icon the blank screen goes away, sometimes not.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way to fix:either restart Firefox or reduce the window and open it again.

Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way I can proceed is if either restart Firefox (very annoying) or reduce the window and open it again. Please help!

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Firefox won't open when I click on the icon. I've tried uninstalling so that I can reinstall, but it says I have to close firefox (which isn't open), so I'm stuck.

The problem: Firefox won't open when I click on the program.
Solutions tried: #1) I tried to uninstall the program so that I can download it again, but the screen shows the message "firefox must be clsoed.. to proceed with installation". However, firefox is not open.
#2) I tried to download firefox, thinking that possibly it would update and solve the problem. However, I get the same error message that "firefox must be clsoed.. to proceed with installation" Problem is that firefox is not open.
I've done a screen shot, so you can see that I do not have the firefox browser open.

Thanks for the reply. I tried repairing the permissions (as well as several other things like deleting the Finder preferences file), but no dice.
Given that the problem cropped up right after updating OS X on two separate machines, it's looking to me like it's just a bug that needs squashing at this point.

Keep getting a message that firefox is outdated but when trying to update the download is the same version in mac os

keep getting a message that firefox is outdated but when trying to update the download is the same version on mac os. The version is 34.0.5 .As soon as I launch the brwswer i get the update message.

hello dbajayo, your useragent (the information the browser sends to websites to identify its version) - apparently mistakenly - shows you're on firefox version 3.6.
probably some sort of toolbar or adware has overwritten it. please refer to this article in order to reset the user-agent settings in firefox: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]]

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

With multi tabs open I go to close Firefox 5.0 and it will not keep the tabs there it closes all tabs

With multi tabs open I go to close Firefox 5.0 and it will not keep the tabs there it closes all tabs so when I restart I have to re-open the tabs. I was using 3.6 firefox and had the option to close but keep the tabs so they would open when I re-started firefox.

upgrade your browser to Firefox 8 and check
* getfirefox.com

After Firefox has been on for awhile, the Firefox tabs on the task bar disappear even though the pages are still running. I have to use Ctrl+Tab to fix it

I have started using Firefox recently. My computer is running XP. I notice that whether I have one Firefox window or multiple windows open, after awhile the Firefox tabs on the bottom task bar just disappear.
In order to get them back I have to use Ctrl+Tab to select each window one at a time and then they re-appear again on the task bar. Then after awhile they will disappear again.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

I just downloaded the new 4.0 an now when I click on the tab it won't even load up, it'll look like the page will show up but then it won't an the it'll look like I never even clicked on it. What is going on? Why won't firefox work?

My firefox was working perfectly before when I had the 3.6 but now it just won't load up at ALL! I've dealt with it crashing on me while I was on the internet but I've never clicked on the tab OVER an OVER again an still not even having the home page show up on my screen. Its getting really frustrating and I now really wish I'd of just left my firefox the way it was. . .can you please help me??

Please do the following. 
#Use Internet Explorer 8 or 9 and go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] Do not choose "Run" when you see the prompt, but instead choose "Save" and save the file to your desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation. 
'''To reset your home page, do the following'''. 
* Go to the site you want to set as your homepage. 
* Click the orange Firefox button and go to '''Options '''| '''Options '''| '''General'''. 
* Make sure it says "''Show My Homepage''" in the first dropdown menu. 
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. 
Here are a few tips to make FF4 look like the previous version in case you don't like the new design. 
* Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar. 
* Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top. 
* To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there. 
* To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

Since installing 4.0.1 I can't right click on the Icon in my task bar and have Firefox give me the option of "close and save" the tabs. Only let's me know I'm about to close multiple tabs. How do I get "save and close" back?

Before installing 4.0.1 I could right click on the Firefox icon on my computer's taskbar and hit close window. It would then give me the option to "save tabs and quit" or "close all tabs."
Now it just alerts me that I'll be closing multiple tabs.
It was convenient to be able to close Firefox and open it with all of the tabs in place. There is nothing more irritating than having multiple tabs lost because your computer did an update overnight and restarted. Also it was helpful when you wanted to run a tun-up or cleaner that asked you close out of your browser for optimum result's.
How do I get "save and quit" back?
Thanks

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Firefox does not open when i click on the icon or menu path

when i click on the desktop icon or go through the menu path to open firefox, the computer will run it but nothing appears. apparently, firefox is still running in the background but i cant get to it. so whenever i try to edit another program that involves firefox, i have to go to the task manager to manually shut it down.
i tried running it in safemode but it does the same thing. furthermore, i deleted the whole program and reinstalled it hoping that that might fix the problem. however that did not work, i have searched all the offered support and have come up dry.
i am running the current firefox version and i am using a windows 7 professional operating system

Hi,
It could be that a security software installed in the system is blocking the new updated Firefox executable. You may have to go into the settings of the security software to re-trust Firefox.
Please also check if you are able to start Firefox by browsing to the Firefox installation folder ('''Program Files (x86)\Mozilla Firefox\''' or '''Program Files\Mozilla Firefox\''' ) and clicking '''firefox'''.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

How do I stop firefox from sending a message or note that " do I want this program to change my computer?" It changes some of the settings in my computer; like the color of my task bar changed and other settings too.

Before nothing happened until just recently when box messages would appear and tell me to click "yes or no" if I want the program to change my laptop. I clicked "No", but sometimes it didn't work, and when it didn't work. When it failed, fire fox changed some of the settings in my laptop. For example, the task bar's color would be changed. Also, it seemed as if fire fox had changed some of the settings into an old version. Yesterday I restarted my laptop, and it just went back to normal like nothing happened. But, for a few minutes later, the box will appear and you have to click yes or no. I clicked the "x" button, and it just changed automatically.

Check that you do not run Firefox as Administrator. 
Right-click the Firefox desktop shortcut and choose "Properties". 
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected. 
You also need to check the Properties of the firefox.exe program in the Firefox program directory.

Firefox continues to load streaming videos even after the tab is closed

I'm running Windows 7 64-bit, and I've noticed that whenever I go to load a video (from Youtube, for example), and close the tab before the video finishes loading, Firefox would still be downloading that video.
I can tell because my normal ping to a local server is about 50-60ms. Then when I begin loading the video, it'll jump up to about 800+ms. I close the tab, but the ping continues at this rate. If I go to another video, begin loading that, and close it before it finishes in the same fashion, it will stack, and Firefox will be loading two videos at once (my ping will spike to 1600ms).
This is an extremely annoying issue since my internet connection is on the slow side.

SOLVED!
The hidden download was caused by a Firefox extension named GrabPro, included in "Orbit Downloader" boundle.
GrabPro caches all streamed media, providing a way for save it quickly.
You can disable this feature unchecking the "Enable Recorder" option in its configuration dialog.
This sofware was present on all my tested systems.
That was the cause of my confusion.

I'm running XP SP3, FireFox 26.0 - sometimes when I minimize FF, the tab in my task bar disappears.

Similar Messages

Maybe you are looking for