I'm showing a strong wi-fi connection but can't access web?

I have a strong WI-FI connection but when I go to access a website it won't open?Any suggestions to fix problem would be appreciated. I've already tried the reset network settings route but that only worked temporarily.

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Similar Messages

  • Have WIFI connection but can't access Safari or App store, nothing.  Can anyone help??

    I have just bought a iPad 2 WI-FI 16G today.  I have a full WI-FI connection but can't access the App store or Safari for any webpages, can anyone help?
    Thanks!!!!

    Despite what you call, "a full WiFi connection", you may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid local network IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power to the router for 30 seconds and then  restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • My ipod touch shows I have wi fi connection but no internet access, what can I do about this?

    I have a new ipod touch and it shows I have a wi fi connection, but I am not able to connect to the internet.
    Any suggestions?

    Try this first.  In Settings > WiFi: Turn wi-ff, then turn it back again.  If this does not work try Settings > General > Reset > Reset Network Settings.
    If you have never been able to connect and are using WPA security, make sure your password is correct.  If you are using WEP security, you're wasting your time as WEP is hackable in less than 30 seconds.  And the iPod often has problems with WEP.
    In any case, if you can't get it to work at home, try it in a place with free wi-fi.  If it works there the problem is probably with your router (this can be the case even if your router works with other equipment).

  • ASA 5505 IPSEC VPN connected but can't access to LAN

    ASA : 8.2.5
    ASDM: 6.4.5
    LAN: 10.1.0.0/22
    VPN Pool: 172.16.10.0/24
    Hi, we purcahsed a new ASA 5505 and try to setup IPSEC VPN via ASDM; i just simply run the Wizards, setup vpnpool, split tunnelling,etc.
    I can connect to the ASA by using cisco VPN client and internet works fine on the local PC, but it cannot access to the LAN (can't ping. can't remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile i created worked fine.
    Below is my configure, do I mis-configure anything?
    ASA Version 8.2(5)
    hostname asatest
    domain-name XXX.com
    enable password 8Fw1QFqthX2n4uD3 encrypted
    passwd g9NiG6oUPjkYrHNt encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.1.1.253 255.255.252.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address XXX.XXX.XXX.XXX 255.255.255.240
    ftp mode passive
    clock timezone PST -8
    clock summer-time PDT recurring
    dns server-group DefaultDNS
    domain-name vff.com
    access-list vpntest_splitTunnelAcl standard permit 10.1.0.0 255.255.252.0
    access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.252.0 172.16.10.0 255.255.255.0
    pager lines 24
    logging enable
    logging timestamp
    logging trap warnings
    logging asdm informational
    logging device-id hostname
    logging host inside 10.1.1.230
    mtu inside 1500
    mtu outside 1500
    ip local pool vpnpool 172.16.10.1-172.16.10.254 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server AD protocol nt
    aaa-server AD (inside) host 10.1.1.108
    nt-auth-domain-controller 10.1.1.108
    http server enable
    http 10.1.0.0 255.255.252.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 10.1.0.0 255.255.252.0 inside
    ssh timeout 20
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy vpntest internal
    group-policy vpntest attributes
    wins-server value 10.1.1.108
    dns-server value 10.1.1.108
    vpn-tunnel-protocol IPSec l2tp-ipsec
    password-storage disable
    ip-comp disable
    re-xauth disable
    pfs disable
    ipsec-udp disable
    ipsec-udp-port 10000
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpntest_splitTunnelAcl
    default-domain value XXX.com
    split-tunnel-all-dns disable
    backup-servers keep-client-config
    address-pools value vpnpool
    username admin password WeiepwREwT66BhE9 encrypted privilege 15
    username user5 password yIWniWfceAUz1sUb encrypted privilege 5
    username user3 password umNHhJnO7McrLxNQ encrypted privilege 3
    tunnel-group vpntest type remote-access
    tunnel-group vpntest general-attributes
    address-pool vpnpool
    authentication-server-group AD
    authentication-server-group (inside) AD
    default-group-policy vpntest
    strip-realm
    tunnel-group vpntest ipsec-attributes
    pre-shared-key BEKey123456
    peer-id-validate nocheck
    privilege cmd level 3 mode exec command perfmon
    privilege cmd level 3 mode exec command ping
    privilege cmd level 3 mode exec command who
    privilege cmd level 3 mode exec command logging
    privilege cmd level 3 mode exec command failover
    privilege cmd level 3 mode exec command packet-tracer
    privilege show level 5 mode exec command import
    privilege show level 5 mode exec command running-config
    privilege show level 3 mode exec command reload
    privilege show level 3 mode exec command mode
    privilege show level 3 mode exec command firewall
    privilege show level 3 mode exec command asp
    privilege show level 3 mode exec command cpu
    privilege show level 3 mode exec command interface
    privilege show level 3 mode exec command clock
    privilege show level 3 mode exec command dns-hosts
    privilege show level 3 mode exec command access-list
    privilege show level 3 mode exec command logging
    privilege show level 3 mode exec command vlan
    privilege show level 3 mode exec command ip
    privilege show level 3 mode exec command ipv6
    privilege show level 3 mode exec command failover
    privilege show level 3 mode exec command asdm
    privilege show level 3 mode exec command arp
    privilege show level 3 mode exec command route
    privilege show level 3 mode exec command ospf
    privilege show level 3 mode exec command aaa-server
    privilege show level 3 mode exec command aaa
    privilege show level 3 mode exec command eigrp
    privilege show level 3 mode exec command crypto
    privilege show level 3 mode exec command vpn-sessiondb
    privilege show level 3 mode exec command ssh
    privilege show level 3 mode exec command dhcpd
    privilege show level 3 mode exec command vpnclient
    privilege show level 3 mode exec command vpn
    privilege show level 3 mode exec command blocks
    privilege show level 3 mode exec command wccp
    privilege show level 3 mode exec command dynamic-filter
    privilege show level 3 mode exec command webvpn
    privilege show level 3 mode exec command module
    privilege show level 3 mode exec command uauth
    privilege show level 3 mode exec command compression
    privilege show level 3 mode configure command interface
    privilege show level 3 mode configure command clock
    privilege show level 3 mode configure command access-list
    privilege show level 3 mode configure command logging
    privilege show level 3 mode configure command ip
    privilege show level 3 mode configure command failover
    privilege show level 5 mode configure command asdm
    privilege show level 3 mode configure command arp
    privilege show level 3 mode configure command route
    privilege show level 3 mode configure command aaa-server
    privilege show level 3 mode configure command aaa
    privilege show level 3 mode configure command crypto
    privilege show level 3 mode configure command ssh
    privilege show level 3 mode configure command dhcpd
    privilege show level 5 mode configure command privilege
    privilege clear level 3 mode exec command dns-hosts
    privilege clear level 3 mode exec command logging
    privilege clear level 3 mode exec command arp
    privilege clear level 3 mode exec command aaa-server
    privilege clear level 3 mode exec command crypto
    privilege clear level 3 mode exec command dynamic-filter
    privilege cmd level 3 mode configure command failover
    privilege clear level 3 mode configure command logging
    privilege clear level 3 mode configure command arp
    privilege clear level 3 mode configure command crypto
    privilege clear level 3 mode configure command aaa-server
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
    : end

    I change  a Machine's gateway to this ASA and capture again, now we can see some reply.
    All ohter PCs and switches gateway are point to another ASA, maybe that's the reason why i didn't work?
    what's the recommanded way to make our LAN to have two 2 gateways(for load balance or backup router, etc)?
    add two gateways to all PCs and swtichwes?
    1: 18:15:48.307875 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       2: 18:15:49.777685 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       3: 18:15:51.377147 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       4: 18:15:57.445777 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       5: 18:15:58.856324 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       6: 18:16:00.395090 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       7: 18:16:06.483464 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       8: 18:16:08.082805 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       9: 18:16:09.542406 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
      10: 18:16:20.640424 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      11: 18:16:20.642193 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      12: 18:16:21.169607 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      13: 18:16:21.171210 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      14: 18:16:22.179556 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      15: 18:16:22.181142 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      16: 18:16:23.237673 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      17: 18:16:23.239291 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      18: 18:16:27.676402 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      19: 18:16:29.246935 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      20: 18:16:30.676921 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      21: 18:16:49.539660 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
      22: 18:16:54.952602 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
      23: 18:17:04.511463 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request

  • WRT54GS V4.0 Laptop Connects But can't access internet unless I am in DMZ mode.

    This is recent. I've changed no settings or otherwise done anything to block access, but I've had this problem 2 times now, and I'm beginning to think the router is crapping out on me.
    Here's why I know it is not the laptop Wifi that is the problem... When I am connected to the router, I CAN access the router administration pages, but I can't access anything on the internet itself unless the modem is in DMZ mode(I have to put it into DMZ mode and then power cycle the router). If the modem is in DMZ mode, I have no problems.
    This only happens with the Wireless connection. On my desktop I have no such problems either way.
    I have been using this router since January of this year and have not had any issues until recently when I would occasionally have to reset the laptop's connection to this router, and now this issue.
    Note: after it happened the first time, I took my laptop over to the in-laws house and I had no issues for the entire day that I was using the laptop. I come back here to my router and start having issues again.
    P.S. I use Ethereal (wireless security monitor) to determine what channels others are using within my range and have set mine to different channels that do not conflict with others, but still no change.
    Message Edited by jokieman on 11-25-200612:36 PM
    Message Edited by jokieman on 11-25-200601:05 PM

    Hi.. What are the DNS serves that are assign to your laptop when you have this issue? Are they public or private? Are you able to ping to any of these DNS server?
    You should have public DNS server assign to your laptop. and you should be able to ping to that DNS server to make sure that you have internet connection. If you dont have public dns server, try to ping to 4.2.2.2 (a very common dns server) if you are able to ping to this, then assign this dns to your laptop. you should be online.
    Also try to upgrade the firmware on the router.

  • Home hub connected but can't open web pages

    Hi
    Having a problem accessing any web pages. Has been like this for last 3 days. All the lights on the BT Home Hub are on and according to the task bar on my laptop it is connected and signal etc is all fine. When you open browser it tries to connect but never loads a page and eventually times out. Have phoned BT broadband help and they say there is nothing wrong with the line. Pretty certain it's not my laptop as my wife's has exactly the same problem and she uses a different browser and has different anti-virus software.
    Any suggestions?
    Thanks

    I have also had exactly the same problem!
    I've had the BT Broadband option 1 for at least 3 years now and not had any major problems (lucky me).  I decided to go for the new package (TV, Broadband (option 2), & calls package £18 per month - currently on offer) as I wanted to get Sky Sports through BTVision.  I'm not allowed Sky or cable TV where I live.  The activation date for Broadband option 2 was Monday 7th March and Monday 14th for BTVision.  This also included a new router i.e. HomeHub3.
    On Sunday the 6th March my internet connection was fine i.e. could open web pages, get email etc (using a BT Voyager Router).  On Monday 7th I went on line and was unable to open web pages.  I thought it might be a minor problem i.e. back up in an hour.
    On Tuesday the 8th March I still had the same problem (Voyger Router) but had also received my new router (BT Home Hub 3).  I decided to install the new hub thinking that would resolve the problem but it did not.  I then tried a wirless & cable (2 different cables) connection to my PC & XBox and still could get online even though I was "Connected".  I phoned the broadband help desk and was on the phone for at least an hour with no success.  The help desk agent said it could be a problem with my account and said he would ring me back on Wed at 8pm........guess what?  No phone call.  I then phoned up again (10pm) & went through all the usual tests.......again!  It still didn't work and I was told that it was probably a problem with my PC and they put me through to another department that should be able to help.  I was then asked what the problem was (no communication between department then!)  I had to go through the whole thing again and was then told that I would have to pay £10 a month (for at least 3 months) for them to do further checks.
    Wednesday & Thursday evening I phoned the Broadband help line (same tests again - no notes on my previous calls!) and still no success. I didn't pay for the £10 month service (BT Home help) out of principle and do not know what to do next.

  • Strong signal, but can't access web

    I've been using an open wireless network for a couple weeks, but suddenly I was unable to access any websites or email, even though the signal is strong and there's no password requested for access. Please help.

    First, welcome to the discussions.
    You say, I've been using an open wireless network.(Yours) or someone else's.
    If by chance it was someone else's, They might have password protected there network.
    We need to know, who is your service with?
    Are you hard wired, or wireless?
    What kind of Modem are you using?
    Are you using a Router, if so what kind?
    What are your Network settings?
    One last thing if by chance you were using someone else's Network it is Illegal.

  • Windows 7 Won't work with GT704WGB - Connects, but can't access internet or ping router

    Upgraded my Verizon DSL.
    I replaced an old WireStream DLS router and NetGear wireless access/router with Verizon's GT704WGB.
    After  I replaced it, Wireless connections from Windows 7 no longer work.
    Help. Any ideas?
    1. The GT704WGB installation seemed to be easy and successful.
    2. I have 3 devices and 4 operating systems
        a. An iPhone - It connects to my wireless network and works fine.
        b. An Acer lap-top running Windows XP service pack 2 - It connects to my wireless network and works find.
        c. An Hp Pavilion lap-top running Ubuntu Linux
             i. It connects to router via cable and works fine.
            ii. It connects to router wirelessly and works fin.
        d. The same Hp Pavilion when booted to Windows 7 doesn't work wirelessly.  :-(
             i. It connects via cable to router and works fine
            ii. When I disconnect cable and connect wirelessly IT DOESN'T WORK. :-(
    What happens is Windows reports the the wireless adapter has connected to the network, but says it is NOT CONNECTED TO INTERNET. Further I can't ping the router, 192.168.1.1. I have checked the IP4 properties and settings for the adapter. They seem
    fine.
    1. Adapter has an address on the network.
    2. DHCP is enabled.
    3. Gateway is provided automatically  by DHCP
    4. DNS is provided automatically by DHCP.
    Pinging router gets no response. Attempting to resolve a name, www.google.com reports unable to resolve name.
    All of this works perfectly when directly cabled to router.
    Any help with how to troubleshoot this would be appreciated.
    Solved!
    Go to Solution.

    Solved my own problem. Sorry for the spam. :-)
    Windows does not support multiple gateways. I had foregotten I had a 2nd wireless access point/router plugged into the network (Cisco/Linksys E1000). That router had been working fine in combination with old SpeedStream DSL router from Verizon, but apparently it introduced a second gateway address which was in conflict with GT704WGB.
    Solution:
    1. Unplug Cisco E1000. Reset it to factory settings by pushing red button.
    2. Plug Cisco E1000 back into network.
    3. Use Cisco CD and setup.exe to "install" E1000.
    4. Use Cisco CD and Cisco Connect to reconfigure E1000.
    5. Done.
    All devices working with all OS's including Windows 7.

  • My ipad freezes when trying to connect to WIFI.  It say i am connected, but can't access sites

    I am using the Wifi in my house and I am connected.  The IPad 3 freezes.  My phone which is an I phone 4 works fine on the wifi.
    What shold I do

    You can try clearing Safari and see if that fixes the problem.
    Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Tried everything - says its connected, but can't access the internet

    I have set up my wireless correctly. I went in and changed the name of SSID, and put a WEP password on it. I have the Default IP as 192.168.1.1 and starting IP at 192.168.1.100
    I pinged 192.168.1.1 and it was fine. I then pinged the 4.2.2.2 and it timed out. So I downloaded the firmware and upgraded it successfully. Tried the ping again and got the same result. Also, when I connect the modem to the router, then the router to my computer the internet doesn't work. I have to bypass the router and just use the modem. 
    I have reset the router multiple times - it is hard to set up because in my building there seems to be someone else nearby who has a linksys router with the same default IP and they don't have a password or anything so it's hard to decide which one to connect to to set up. 
    either way, nothing has worked. Any ideas?!?!

    Whats the model number of your Router. When you Hardwired you Computer to the Router you still dont have a access to internet. This means your router is not configured properly.
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link
    Here are the wireless settings which you can set on your router, Assuming you have a G series router, Follow this steps.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect... 

  • Internet connected but can't access any websites

    Hi everyone,
    I have wireless and my computer was working totally fine this morning. I didn't download any updates or anything and when I came home this afternoon it said that my computer was connected to the internet but when I try to open any webpages in Safari is just says that it is trying to load the page but never actually does. MSN messenger will not work either. Does anyone have any idea how I can fix this?? I know it is not the internet because our PC on the same network is working fine. Thanks in advance!
    P.S. Not completely sure of my OS, still kinda new to Macs.

    journey778, Welcome to the discussion area!
    Your system information states OS 10.0.x. If you are using that version of OS X you do not have an Intel based iMac. I would suggest that you upgrade to OS 10.2 at least.
    If you do have an Intel based iMac, you may want to try renewing the DHCP lease. Open System Preferences->Ethernet->Advanced... and click on the "Renew DHCP Lease".

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

  • My apple iphone 4s wont charge! its showing that the power is connected, but not showing that its charging! phone is turned off and now wont turn on

    I phone 4s is not charging, its showing that the power is connected, but still not charging

    Hi Sharky,
    First, I would make sure you are charging using the wall adapter and cable that came with your phone.  Plug into wall outlet.
    If it was completely drained it can take about 20 minutes for it to fully get enough power back to even start up.
    After about 20 minutes of charging in the wall outlet try turning it on like normal.
    If it doesn't respond by just pushing the power button, try pushing and holding the power and home buttons together for about 15 seconds to see if it will startup.
    John

  • Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

    Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

    There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/

  • Have a MacBook. Shows I have an internet connection, but cannot get on. I do have connection with my other computer???

    Have a MacBook. Shows I have an internet connection, but cannot get on. I do have connection with my other computer???

    I've looked at the IP adress, and it started with 169.
    This means you aren't actually connected to the Internet; only to your router.
    An easy first attempt at a fix is to turn your router off and then on again.

Maybe you are looking for

  • Canon 30d and iphoto 6...will not import RAW

    I'm a bit confused with iphoto 6, I know it supports Raw and my 30d... but everytime I import(or rather attept to import) RAW format it gives me an error message????? however jpg. are no problem....what am I doing wrong? thanks

  • Skype won't allow new contact to be added. I am ru...

    Is there a fix for this? Chuck Salem, Oregon

  • Exception of type  'System.OutOfMemory Exception' was thrown while running

    We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.2. When I try to run a report which has around 5 lakh records (the query to fetch the records in sql server takes around 1.5 to 2 minutes) gives an error Exception

  • Dropping by to say hi...

    After a fairly long hiatus to pursue musical aspirations, I'm returning at least part time to Fireworks (and the whole CS5 Creative Suite). Some of you may remember me as richiebee from the Macromedia days. I know I recognize some names on here.  App

  • Time Lapse (or similar) effect

    I have a question, it may fall under the "dumb question" category but I want to make sure i am thinking about this in the right way. I am shooting a music video type of project for my church this weekend. I have been requested to produce a time lapse