I'm so close to giving up on downloading the windows 8.1 update !! I need help

I have been trying to download this update for the past week this is my 4th time. Today it took hours to get to 63% complete and when it reached 63% it says "applying changes". Its been 2 hours and it doesn't change from "63% complete applying
changes". I'm so frustrated why is this taking so long!? Should I restart it?? 

It is not recommended to do force reset during upgrade but if you have to do it, it will try recover Windows and then try run Windows 8.1 Upgrade Advisor:
http://go.microsoft.com/fwlink/p/?linkid=261871
And see if it detects any issue or problems?

Similar Messages

  • I downloads the latest iTunes software update and it properly installed.  But,  I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the

    I downloaded the latest iTunes software update and it properly installed.  But,  I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the window.  Tried to quit on both the big window and the software update title in the menu bar.  No luck.

    Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue.  It did not help.  Found a very similar question in the discussions and it recommended "Force Quit".  That worked and the update works normal and the window is gone.  Thanks!

  • My mail will not open or close when aim done using it? Is there any update i need to do to make this work properly??

    If some can help me?? My mac mail will not close when iam finished with it, or will it open when i awake my computer is there an update i need to do??

    As the message comes from AVG yo will need to read about AVG to stop those alerts.
    If you think there is a genuine problem with firefox
    * see [[high memory usage]] <-- clickable link -- <br/> that contains some tips and information about memory usage
    * go to ''about:memory'' by keying that into the location bar <br/> the report that is generated may be of help - it gives tooltip info on mouseover of items, and has a button that tries to reduce memory usage

  • And equally close Firefox it stays on while the window is closed

    and poret being off progam on Firefox is still working so that when I try to run it again on reports that it is active, although its action Nevid. Because every time I go to task manager and stop the process there.

    Yes, I know I can close FireFox from the file menu instead of the X. But this isn't a solution. Every application since Windows was announced has been able to be closed with the X. It would take a long time to retrain this 82 year-old to quit using the X and go to File>Close. This process is so ingrained in my actions that it would not be possible in my lifetime - and I expect to live till 103! If I was still managing a development team instead of being retired, I would fire the developer that released a product that didn't adhere to convention that has been ingrained for 30 years. Please fix soon. In the meantime I'll have to use an alternate browser...

  • Hello, i don't know whats wrong, firefox do download the updates but by installing he say that im using firefox but before i try to install the update i close everything, so that isn't the problem iguess, i hope you can help me with this issue! Marco

    i can't install updates on my pc

    yes i know that, firefox has downloaded that version
    but when i try to install the update
    i get a pop-up that say that im using firefox and need to close it
    so i do that but then i get a error that im using firefox after that firefox cancel the update installation

  • Hello, firefox download the updates but by installing he say that im using firefox but before i try to install the update i close everything, so that isn't the problem iguess, i hope you can help me with this issue! Marco

    Can't Install Firefox Updates On My PC

    yes i know that, firefox has downloaded that version
    but when i try to install the update
    i get a pop-up that say that im using firefox and need to close it
    so i do that but then i get a error that im using firefox after that firefox cancel the update installation

  • I am having trouble with installing after effects on windows 7 trial version i need help its giving me a error

    i am  having trouble installing adobe After Effects windows 7 trial verison its gives me a error

    What does the error indicate?

  • When I try to close the Firefox window, it is not closing. I have to click outside of the window and click back on the x button in order to close it.

    For example, if I type something into the Google search bar and then try to click on the minimize or close button, nothing happens. In order to close Firefox, I have to click ''outside'' the firefox window (on my desktop or task bar) and then I can click close. If I click inside the window again, I cannot close.

    You could exit Firefox from the File menu. You can also use Ctrl-Shift-W to close the window.

  • Keep getting this prompt when I close a tab: ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589) Stack Trace: 0:([object XULElement],[object XULElement],0) How do I get rid of it?

    ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589)
    Stack Trace:
    0:([object XULElement],[object XULElement],0)
    Happening since I went to the 4.0b9 beta. Thanks for any help in getting rid of it.

    They're still working on fixing that Bug - https://bugzilla.mozilla.org/show_bug.cgi?id=608589 - a fix for another Bug - https://bugzilla.mozilla.org/show_bug.cgi?id=613888 - landed earlier this week which might have fixed it. Unless you are willing to install a nightly Trunk which has the latest fixes, you'll have to wait for 4.0b10 for the fix.

  • Can't close tab. Don't get an X in tab.ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589) Stack Trace: 0:([object XULElement],[object XULElement],0)

    error msg: ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589)
    Stack Trace:
    0:([object XULElement],[object XULElement],0)

    A work around is goto about:config
    toggle the following line so that it is set to false.
    browser.tabs.animate

  • How do I import a clip when the window automatically closes?

    I was unable to even open After Effects CC when I upgraded to OS Mavericks. Once I realized adobe released a patch for it (the 12.0.1 "trial" update), the program opened. I thought all was fine, until I attempted to import a new video clip. It would not let me even move the clip, let alone edit it, before giving me a "grouping" error, and then abruptly crashing. Today Adobe released the 12.1 update, which seems to be running ok, except the window for importing footage automatically closes once opened. I can no longer just drag a new clip in to my composition either. How can I get by this?
    -Christian

    See this:
    http://forums.adobe.com/message/5805902#5805902

  • Inactive Trade Lines - Close or let it ride til the Creditor closes it?

    Hello all: Thanks to the advice of the forum I have had great advances in my credit worthiness. At this juncture there are several trade lines that I am not using and expect to go inactive. I know that the creditors decide when they stop reporting and at some point may even close the inactive accounts. The accounts not being used are:Chase Freedom $2k CL @ 21.24% (paid off in Apr 2015, not using because of interest rate and never have been offered a CLI, oldest card opened in 2009)Citi Double Cash $2k CL @ 19.99% (paid off in Apr 2015, not using because all CLI requests denied, opened in 2012)Apple Barclaycard $3k CL @ 21.99% (paid off in Apr 2015, not using because of interest rate, opened in Nov 2013)JC Penney Credit Card $2.3k CL @ 26.99% (paid off in September 2014, not used since, spouse uses their JCP account to earn rewards and PIF each month, opened in Jan 2014) The accounts being used are:Venture $15k CL @ 17.9% (opened June 2015) - PIFQuicksilver $5k @ 17.9% (opened May 2015, 0% til Feb 2016) - Carrying $3k balance til 0% endsDiscover It $4.5k CL @ 18.9% (opened June 2016, 0% til May 2016) - Carrying $4k balance til 0% endsAmerican Airlines Store Card $750 @ 25.99% (use this for travel as airfare charged is 6 months no interest, always PIF by month 6, opened Nov 2013)My Best Buy Store Card $1.5k @ 25.24% (use this for bonus Best Buy points, always PIF each month, opened Dec 2012) I do not like having the accounts sitting around for fear I might miss a fee, change in terms, or something else that would give me a baddie because I did not pay attention. I am not a fan of pulling cards out of the sock drawer every so often to charge something. I am working to keep things as simple as possible.  Obviously the big accounts are all newer but the CLs more than exceed my needs and the 0% balances will be PIF by the promo expiration. With the trade lines as they are now would it be worth the risk to the score to close the accounts I am not using (and don't intend to use)? Or should I just keep them around until the creditor gives up on me using them? Thanks for reading,TBG

    Be aware that if you close cards your overall utilization will go up.  Just something to consider.   I would probably escalate your CLI requests to the EO/facebook/twitter before giving up on them.  If that is the only reason you're getting rid of them.  "I do not like having the accounts sitting around for fear I might miss a fee, change in terms, or something else that would give me a baddie because I did not pay attention."As for that, there are apps online and on your phone that will keep track of all cards/payments due.  I use prism on my iphone.  Some use mint.

  • I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

    I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

    Canon 1DX support was added to ACR in version 6.7, 7.1.  An updated CS6 should be at level ACR 8.6.  If your ACR is not at level 8.6 try using CS6 menu Help>Updates.  If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

  • My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.

    My Mozzilla crashed: "We're Sorry....Firefox had a problem..." I download the new version and it is still giving me the crash report.
    I tried to loading in "safe mode" but I still could not open Firefox.
    I never received a crash i.d.

    It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • The window 8 store and all other app open and then close immediately .

    The window 8 store and all other app open and then close immediately .I
    have tried many methods like sfc /scannow,, powershell
    -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml without the quotes but , changed registery entries but found no effect . kindly help me !

    Hi ObaidMaki,
    This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
    I would suggest you posting it in the dedicated Windows Forum
    http://answers.microsoft.com/en-us/windows for more efficient responses, where you can contact Windows experts.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • SAP PI Interface for Multiple Bapi

    hi, i need to expose 2 Bapi (Bapi A and Bapi B) using SAP PI 7.0 using single PI Interface / webservice. 3rd party --> SAP PI -->SAP ECC6. for first option, i can create new Bapi C and include Bapi A & B new Bapi C.  then only expose BAPI C in SAP PI

  • How can you debug sudden freezes and restarts? Only overheating?

    My iMac, under Win XP via Boot Camp, will freeze and restart unpredictably when playing games. I thought I had tracked it down to overheating, but it's not that simple. Is there any error logging at the BIOS level with Boot Camp or any record when it

  • What's new in Premiere Elements 12?

    Version 12 of Premiere Elements isn't the major overhaul of the interface that version 11 was, but it still includes a number of very nice new features. They include: A new, intuitive Auto Smart Tone tool for easily adjusting your video's black, whit

  • Query execution time

    Dear SCN, I am new to BOBJ Environment. I have created a webi report on top of bex query by using BISC connection. Bex query is build for Vendor Ageing Analysis. My bex query will take very less time to execute the report (max 1 min). But in case of

  • Cable to ((Digitally)) connect iPod to Hi-Fi?

    Here's the problem: Our back deck is rather old and tends to move abit as people walk across it. When the iPod is in it's cradle in the Hi-Fi, it tends to wiggle quite a bit. So, I'm wondering if I can ((Digitally)) connect the iPod - via a Dock conn