I'm stock in restore process:( what can i do? using ipod 5thgen nano
i'm stock in restore process:( what can i do? using ipod 5thgen nano
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Similar Messages
-
I have an iPhone 4 and it will not turn on. I plug in and says connect to iTunes. I connect it and it won't restore. What can I do? Please help
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
Iphone went out, when i did get it back on, up in the top left of screen it continues to show searching, and wi-fi is grayed out keeping me from restoring it. what can i do to fix this?
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can clear some glitches.
If this does not work, try to set it up as new device without using the latest backup.
How to back up your data and set up as a new device -
im trying to update my iphone 3g and i keep getting error 1015 that its unable to restore it what can i do ive been trying for 3 days now
See Here...
https://discussions.apple.com/message/15341923#15341923
From the More Like This on the right... -
I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?
If your phone is in recovery mode, all data are gone. Connect the phone to iTunes on your computer and restore.
-
my iphone screen is broken and i wanna restore the phone but i can't because i enable the 'find my iphone' and now i cant restore it . what can i do? help me plz
There's no way to "restore" your phone, but, you can login to iCloud.com, using your computer, locate your phone, then erase it.
-
Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.
Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…
-
I have an iphone 5 but it keeps displaying plug into itunes. I have downloaded the latest verision of itunes and have treid numerous times to restore this device but I am having no luck. It starts to downlaod the software but then quits and displays plug into to itunes and restore. What can I do?
See Here
Frozen or unresponsive iPhone -
have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged. Since then I cannot access the apple tv menu. When I run diagnostics it says it is operating properly but will not factory restore. What can I try?
Apologies, I was looking at the wrong schematic for the Apple TV 1. There isn't a button. So lets try this instead...
Remove the power cord and wait 20 seconds.
Plug it back in and let it boot (Give it 10 minutes, it's being tempremental)
Try and navigate to the the advanced menu and do a factory restore
If that doesn't work then if you are using the white remote hold down the menu button for six seconds and release this should bring up a hidden menu which will allow you to access the advanced configuration settings.
Again, if this fails there isn't much to do than tap it with a hammer to see if that fixes it (hard to believe how many times that actually works. (No responsibility taken if it breaks!, but at least you'd have a good reason to buy Apple TV 3) -
I have ran the diagnostics test on iTunes and iPod. The diagnostic says there is an iPod, it is identified with the correct name, but it says there is no sync ability. What can I do? iPod nano 3rd generation. All updates are current.
It had not been used for awhile and most of the songs that were on there were gone when I turned it on. I was trying to sync to update the library.sklshrnk wrote:
It had not been used for awhile
Weeks, months, years? It's possible your battery is dying. Take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.
Syncing Music to iPod -
"Use iTunes to restore". How can I access the iPod w/o losing present data?
I have a request from my grandaughter to download a number of songs to her iPod. I charged the battery fully. When I tried to start it , it read "Use iTunes to restore". How can I access her iPod w/o losing any of her present songs? Please please help.
You can't. Restoring will always erase the device. Unless you have a backup in iTunes or iCloud everything is removed. Purchased items can be re-downloaded as long as the original Apple ID used to purchase them is also used when reconfiguing the device after it is restored.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Migration from another CMS – how could be done, what can be re-used?
Hello,
I am discovering Webcenter Sites, and would like to know if there are standard tools to migrate from another CMS (e.g. UCM):
– how could be done, what can be re-used?
Thanks in advance,
VinceCould you describe in more details what exactly you need?
a) In Oracle there is an organization called Migration Factory which can do the work for you - if it is a one-off task, I'd go with them, or with a partner.
b) You mentioned UCM - does this mean that you have a Site Studio website(s) that you want to migrate to WebCenter Sites? Why, and why just now? You could probably live for few more years with Site Studio - I believe that very soon Sites and Content will much more integrated and the migration will be much easier.
c) I'm not sure if there is any tool for migrating templates, but I'd definitely try to leave the content (images, videos, documents) in UCM - at the moment, Sites integrate with other Content Repositories (MSSO, Documentum), so UCM will hopefully be added soon. -
The iphone 4s has a slot on the left side of the hardware? What type of slot is it and what can it be used for?
The slot is on the right side and it's for the SIM card.
-
Cant remember password, and ipod wont restore! what can i do?
My daughter cant remember her password, and have tried restoring the ipod, but itunes wont do it, what else can i do?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
IPod Touch 2nd Gen error 28 after battery discharged completely. Won't restore. What can I do?
Saw some discussions on it, but no solution. I had my iPod off the B&W zeppelin for some days, seems battery got empty. When I charged it, it wanted me to connect to iTunes. Did this, but shows error 28. Screen asking to connect to iTunes won't disappear. All attempts to restore or reset did not work. iPod is original without any modifications, latest software updates, and worked well for years. What can I do, or is it dead forever?
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
Above from:
http://support.apple.com/kb/TS3694
Maybe you are looking for
-
New MBP logic board and wireless internet does not work anymore
hi there i had to change the logic board in my only 2 years old MBP15". i purchased a new one and put it in by myself (relatively easy task). i still use the same internal HD as this one still works fine, so all data are the same. however, the new lo
-
Trying to use Crystal Reports XI Release 2 to display a report
I am creating an application in Visual Basic using Microsoft Visual Studio 2005. I have downloaded the trial version of Crystal Reports XI and I have built my report and have attached to the Crystal Viewer that is on my form in my application. I us
-
Unable to View Japanese Fonts in Reader
A conundrum I just can't resolve: I have two computers, both running XP Pro. I downloaded the latest Adobe Reader from the Adobe web site (version 8.1.2) and installed to both computers. I have a PDF with some Japanese fonts in them. When I open the
-
Hi! I have problem with configure BusinesService for HornetQ JMS Server. Connection cannot instantiate: <Error> <WliSbTransports> <BEA-381502> <Exception in JmsInboundMessageContext.close : javax.jms.JMSException: [JMSPool:169803]JNDI lookup of the J
-
My daughter changed her password on her Iphone and we cannot unlock it.