I'm struggling with iOS6 and iTunes [new iPad Cellular]

Last night I connect my new-ipad cellular and was informed to update iOS6. And yes, I did agree to update. After iTunes downloaded and it started updating software + firmware as usual. I think there should be no problem. After finishing updating firmware, I received a notification from iTunes: your ipad is restarting... But in the end, nothing happened. My iPad stayed silent. Power button and Home button have no effect now. I tried to plug ipad to my mac again and restart iTunes. The same notification, saying that my iPad is in recovery mode and I need to restore. This loop never ends. And my iPad doesn't work again.
Please tell me what is the problem. if there is an issue of iOS6, software and firmware, please fix it NOW.
I want my iPad back to work.
All of my data was lost and I cannot use my iPad anymore. What a disaster!!!
PLEASE HELP ME!!!

Restart the Mac and hold down Command+Option+R. Choose to reinstall OS X. The version of OS X your Mac came with will be installed.

Similar Messages

  • Hi. I have an IPAD2 with IOS6 and itunes 11. I can see my music files in itunes but not in my music apps.

    Hi. I have an IPAD2 with IOS6 and itunes 11. I can see my music files in itunes from my Windows PC but not in my music apps on the IPAD. I can even play the music files on my IPAD in itunes.

    Hi there,
    You may find the article below helpful.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    -Griff W.

  • IPhone 4 with iOS6 and iTunes 10.7 on PC/Vista won't sync!!!

    Just updated my iPhone 4 to iOS 6 and my iTunes to 10.7. And now they won't sync. I get the "tone" indicating that the device is recognized when I plug into the usb port, but my iPhone does not appear as a device in iTunes, nor does the iPhone even appear as a device in My Computer. Have uninstalled and reinstalled iTunes. No luck. Have reverted back to installing iTunes 10.6.3 but then it won't open properly becasue the file "iTunes Library.itl" was created by a newer version of iTunes. So back to iTunes 10.7. Have run the iTunes diagnostics and get the below log. Nothing is working. Please help.
    Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
    iTunes 10.7.0.21
    QuickTime 7.7.2
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number ****
    Current user is not an administrator.
    The current local date and time is 2012-10-08 22:20:30.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 3450
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 (x64) is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH10 Family USB Universal Host Controller - 3A34.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A35.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A36.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A37.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A38.  Device is working properly.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A39.  Device is working properly.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A.  Device is working properly.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 6.0
    Serial Number:          CC*******T75
    iPhone 4 (GSM) running firmware version 6.0
    Serial Number:          DX*******P0N
    <Edited By Host>

    OK, getting closer. Looks like it may have something to do with my Apple Mobile Device USB Driver. I get this message when I look at it in Device Manager: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
    Unfortunately, when I try to update the driver Windows tells me that I have the latest version of this driver.
    Is there another remedy?

  • Can you manually load song with IOS6 and iTunes Match?

    My office has zero wifi or 3g reception so I like to load several hundred songs onto my iPhone so I can listen at work. However I also like using iTunes Match when I am elsewhere. After I upgraded to iOs6 I rudely discoverd I had no songs left on the iPhone. When I tried to relaod my music iTunes told me that since I had Match enabled I could only do this wirelessly. I really don't want to d/l that much music over the wifi connection.
    I turned off Match and manually loaded some music, but now when I try to enable match it tells me it's going to erase the library on my iPhone.
    OK am I missing something or do I have to make a choice between Match or manually loading songs

    BojPhoto wrote:
    OK am I missing something or do I have to make a choice between Match or manually loading songs
    Yes. Having iTunes Match enabled disabled traditional music syncing via USB. However, that alert is misleading as it will not actually replace the music that has been synced. It is actually just replacing the "song list."

  • I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have a 4S and upgraded to iOS 6 last week without any issues.
    Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

  • Problem with podcasts and iTunes 6.0.1.3

    Hi everybody!
    First of all, please excuse my poor English: I'm French. I'll try to do my best to write as well as I can.
    I have some difficulties with podcasts and iTunes 6.0.1.3.
    When I "sign up" (FR: "s'abonner") to some podcasts, they are not updated in my iPod nano indeed (and some others are), although iTunes says: "Your iPod is updated" (FR: "Votre iPod est à jour").
    I have no way to put these podcasts episodes in my iPod...
    Could you help me please?
    Thanks in advance for your help!

    Hi iFriend,
    try this, it worked for me:
    1) first of all, uninstall QuickTime and older versions of iTunes from your PC, using the "remove" button in the "install applications" tool that you find in the windows control panel.
    2) reboot the system
    3) turn off the windows firewall application; go into the windows control panel, double click on windows firewall and disable the firewall option
    4) if you have one, disable your Anti-Virus application; i mean its real-time protection.
    5) probably it's not necessary, but for being sure... download and launch the standalone installer of QuickTime (latest version)
    6) download and launch the iTunes + QuickTime installer from this web address
    7) as an option, i suggest you to download and install also iTunes Art Importer. It's a nice application, that allows you to import from the internet directly into iTunes the album ArtWorks of the selected tracks in iTunes. I installed it, and it works very well with iTunes 6.
    8) after all the installations, remember to enable both firewall and anti-virus previously disabled!
    as i said, probably the 5th passage is not necessary, but i did it and it worked!
    if you have any questions or feedbacks, just relpy to this topic. stay iTuned!
    bye, bye,
    Marco

  • HT201413 Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Did you try removing and reinstalling all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Can I use the Speakers AirPlay Philips DS3880W with the new iPod and the new iPad?

    First, I´m Spanish so I can be bad writing in English!!
    I want to buy the Speaker AirPlay Philips DS3880W and I have got the new iPad and the new iPod, in the compatibility, in the information of the speaker, I can´t see them. Why? Althrought the software is the same, Can I use the speaker with them?
    Here is the link: http://store.apple.com/es/product/H6906ZM/A/philips-ds3880w-airplay-speaker?fnod e=77&fs=s%3DpriceLH&p=1

    I say yes. this page says:
    See all FAQs
    Does the product support iPad2 and the New iPad?
    Yes. The product supports iPad2 and the New iPad.
    http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=DS3880W%2F10&dct=FAQ&faqview=1 &new_tmpl=1&refdisplay=C36_IPAD2_NEWIPAD_FULLSUPPORT&refnr=0085930&scy=HU&slg=AE N

  • Since I'm having probs with ios6 and Safari, would the Atomic browser be worth a try?

    Since i'm having probs with ios6 and Safari (Autofill and loss of Wi Fi), would the Atomic browser be worth a try?  trouble is, I'm a bit of a 'newbie' when it comes to the 'clever' stuff, so need a bit of expert advice here.

    I use the Atomic browser for some things. I feel it's main advantage is that you can set the type of browser that Atomic reports. I set mine to Internet Explorer and that allows me to visit regular websites without being redirected to a tablet version. Its free so why not download it and give it a try. If you find it wanting just delete it.

  • Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes?

    Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes? Other photos taken with same camera sync fine from iPhoto while certain events are inexplicably incompatible. I've recently foundvthecsame occurrence with certain mp3s and videos from iTunes.

    For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
    The iPad's supported audio formats are :
    HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

  • Does Production Premium CS6 work with Maverick and the new iMacs

    Does Production Premium CS6 work with Maverick and the new i Macs

    Thankx for your reply. I saw the Apple tech note but that's what Apple says. I just want to know from users who experienced the thing if it really works.
    It doesn't seem so simple if you believe what this site tells (sorry it's in French):
    http://www.macquebec.com/spip.php?article4146
    So: BootCamp worse than the Beta?

  • What is the Nano 6th gen battery life with nikeplus and itunes running together

    Thinking about buying a 6th gen Nano- what is the batt life with Nike+ and iTunes running together?

    Mine is about 4 hours, but I'm not sure if that's typical or if I have a defective battery.

  • TS4036 I am trying to restore with icloud on a new ipad.  WHen I get to iCloud Sign In, it keeps timing out.  Why and how can I fix this?

    I am trying to restore with icloud on a new ipad.  WHen I get to iCloud Sign In, it keeps timing out.  Why and how can I fix this?

    Sign out of old email and sign in with new.

  • I have an 3rd generation iTouch with IOS 5.1 and a new ipad LTE with a definitely higher IOS.  I didn't plug the new one yet because I want to know...can I keep my apps, email, photos on both devices?

    I have a 3rd generation iTouch with IOS 5.1 (won't update any higher) and a new iPad LTE with a definitely higher IOS.  I didn't plug the new one yet because I want to know...can I keep my apps, email, photos on both devices?  And also can I update my apps on the iPad without causing problems (some apps won't update on my iTouch because the IOS is not 6.0).  Thank you.

    Do this:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    Try using this article to help with your iPad not showing up in iTunes---
    http://support.apple.com/kb/TS1538     -This deals with the device not being recognized in iTunes for Windows
    The following steps work well with iPod but i would try them for help with your iPad issue:
    Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
    Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
    If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.

Maybe you are looking for

  • Web Analysis Reports slow in workspace . .

    Hello, We are working to implement Essbase v11.1.13, Web Analysis, FR and work space. BI Plus administrators have significantly faster access to reports than non administrators (reports load 5 to 6x faster for admins). The load time is unbearable for

  • I need your comments , your suggestions , please.

    Use the necessary facilities of the Java Programming langgue to build a visual calculator which can carry out tha following operation. The operation needed are : + - * / clear memorize recall Each of these operations is represented by a button which

  • Owa_util.get_cgi_env( 'REMOTE_ADDR' ) fails with PLSQL numeric error

    APEX Listener 2.0.1 APEX 4.2.2 Oracle 11gR2 Linux RHEL 6.3 Glassfish 3.1.2 ============= After upgrading from APEX Listener 1.1.4 -> 2.0.1 the procedure owa_util.get_cgi_env( 'REMOTE_ADDR' ) fails to return the remote IP Address and instead I get the

  • Why won't photoshop cc run portraiture 2

    why won't photoshop cc run portraiture 2?? Am I doing something wrong?

  • [SOLVED] Unable to create a file in a script

    Hello, I'm running this script: cat "" > $LOG_DUMP/FPGA_log.txt echo "$RESULTS" >| $LOG_DUMP/FPGA_log.txt And this is what I'm getting: hl_script.sh: line 109: logs/2014_04_30_14_41_49/FPGA_log.txt: No such file or directory hl_script.sh: line 111: l